URBAN OUTFITTERS EZRA 81474306 User manual

EZRA BENCH
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 1 of 2
TOOLS REQUIRED BUT NOT INCLUDED:
N/A
WARNINGS:
Do not throw away packing materials and carton until after
assembly. Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or Air
conditioning vents. Adjust levelers so that the furniture sits flat on
uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED
(A) Top Panel (B) Panel (C) Leg (D) Leg
x1 x1 x8 x8

EZRA BENCH
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 2 of 2
STEP 1
Lay the Parts out onto a clean smooth surface such as carpet or cardboard. Align the the Legs (C) to the Top Panel (A) and
screw in clockwise to tighten.
STEP 2
Place the Panel (B) on top of the partially assembled bench. Insert the Legs (D) through the Panel (B) and screw clockwise to
tighten. Carefully tilt the bench to its upright position.