urmet domus 1760 Installation and operation manual

DS 1760-034 LBT 21183
Mod.
1760
OOOOOOOO
PARAMETER CONFIGURATION BOOKLET
Interactive Links
7’’ VIDEO DOOR PHONE
Ref. 1760/31 - 1760/31A (White)
Ref. 1760/33 - 1760/33A (Black)

2DS1760-034
The information contained in this booklet has been carefully collected and checked; however, the
manufacturer may not be held responsible for any errors or omissions. The manufacturer reserves
the right to introduce at any time and without notice improvements or changes in the products and
services described in the booklet.
This manual may also contain references to or information on products or services not yet available
commercially. Such references or information will not in any way imply that the company intends to
market such products or services.
All the trademarks mentioned in this document are the property of their respective owners.
All rights reserved. We hereby authorise the partial or total reproduction of this document for the
exclusive purpose of using the 1760/31 or /33 Video door phone.

DS1760-034 3
INDEX
1. GENERAL DESCRIPTION.....................................................................................................................4
2. 2VOICE INSTALLER TOOLS APPLICATION ........................................................................................4
3. CONFIGURATIONS ..............................................................................................................................4
3.1 Conguringtheparametersofthevideodoorphone .................................................................4
3.1.1 Change the Homepage ......................................................................................................4
3.1.2 Changing the background of the display...........................................................................5
3.1.3 Changing the language of the Video door phone ..............................................................5
3.1.4 Change the time format .....................................................................................................6
3.1.5 Activate WiFi on video door phone....................................................................................7
3.1.6 Conguringthecallforwardingfunction(masteronly) ......................................................9
3.1.6.1Maintenancemode(installeronly)........................................................................11
3.1.7 Changing the brightness of the video door phone ..........................................................13
3.1.8 Conguringtheautomaticswitch-oofscreen...............................................................14
3.1.9 Congurethealarms........................................................................................................15
3.1.9.1 Reset alarms ....................................................................................................... 16
3.1.9.2Congurepanicalarm..........................................................................................16
3.1.9.3CongureinputofAlarm1(intrusion) ..................................................................17
3.1.9.4CongureAlarmInput2(technological)...............................................................17
3.1.9.5Congureoorcall ...............................................................................................18
3.1.10 Enabling the key reader MIFARE...................................................................................18
3.1.11 Maintenance ..................................................................................................................19
3.1.11.1Videodoorphonermwareversion ..................................................................20
3.1.11.2 Reboot...............................................................................................................21
3.1.11.3Howtoupdatethevideodoorphonermware ................................................21
3.1.11.4 Reset to factory settings ...................................................................................22
3.2 Congurationofvideodoorphoneapplicationparameters ..............................................23
3.2.1 How to change the ringtones of video door phone .........................................................23
3.2.2 How to change audio volume ..........................................................................................24
3.2.3 How to change the screen settings .................................................................................25
3.2.3.1 Large Button Mode .............................................................................................26
3.2.4 Operate mode settings ....................................................................................................26
3.2.4.1 Automatic Door Opener ......................................................................................27
3.2.4.2 Answering machine settings ...............................................................................28
3.2.5 Accessibility .....................................................................................................................29
3.2.5.1 Touchless actions ...............................................................................................30
3.2.5.2 Push to Talk Mode ..............................................................................................30
3.2.5.3 Impaired Hearing function on Yokis 8 key ..........................................................31
3.2.5.4 Blind mode..........................................................................................................32
3.2.6 Specials activations .........................................................................................................35
3.2.7 Check lift ..........................................................................................................................37
3.2.8 How to enable or disable the icon Panic .........................................................................40
3.2.9 How to enable or disable the call button at switchboard ................................................41
3.2.10 Restart the video door phone application ......................................................................42
3.2.11 Information on the software version of the video door phone application.....................42
The document contains INTERACTIVE LINKS for faster and more ecient consultation.
Interactive Links

4DS1760-034
1. GENERAL DESCRIPTION
Thisbookletdescribesthecongurationofparametersandfunctionsinthecongurationmenuofthe
video door phone.
2. 2VOICE INSTALLER TOOLS APPLICATION
2Voice Installer Tools is an application dedicated to the installer that allows conguring some of the
functions featured on the video door phone
Through the 2Voice Installer Tools app it is possible to:
•congurethecallforwardingfunctionofthevideodoorphonesinsertedinthedierenttopological
“Apartment” nodes present in the topological structure of the system.
•share the topological structure with the condominium administrator, who, through the use of the
CallMe Manager app, will be able to manage the accounts of users, associated with the video door
phone, who use the call forwarding function with the CallMe app.
•create 32 additional contacts in the directory, which can be imported on the video door phones of a
singleapartmentoronthevideodoorphonesofalltheapartmentsofthestaircase(riser);
•create 32 additional special activations, which can be imported on the video door phones of a single
apartmentoronthevideodoorphonesofalltheapartmentsofthestaircase(riser).
For all information on the use of the app, click on the following link and download the Booklet for use of
the 2Voice Installer Tools app.
3. CONFIGURATIONS
Parameterandfunctioncongurationsaredividedintotwogroups:
•congurationofvideodoorphoneparametersandfunctions;
•congurationofvideodoorphoneapplicationparametersandfunctions .
3.1 CONFIGURING THE PARAMETERS OF THE VIDEO DOOR PHONE
3.1.1 Change the Homepage
To change the video door phone homepage, follow the steps below:
•Switchonthescreen,ifswitchedo,bytouchingitanywhereorpressingtheHomebutton.
•Press the icon to access the Top Page.
•Press the icon toaccessthevideodoorphoneparametercongurationpage.
•Click on the Homepage(theactiveHomepageisshownontheright,inthisexample“VideoDoor
phone”)todisplayapop-upwindowinwhichtheHomepagecanbechosen.Selectthenewhomepage
or press the Xiconinthetopright-handcornertoclosethewindowwithoutmakingchanges.

DS1760-034 5
3.1.2 Changing the background of the display
To change the display background, follow the procedure below:
•Switchonthescreen,ifswitchedo,bytouchingitanywhereorpressingtheHomebutton.
•Press the icon to access the Top Page.
•Press the icon toaccessthevideodoorphoneparametercongurationpage.
•Press on Wallpaper(theactivewallpaperisshowntotheright)todisplayapop-upwindowinwhich
the display background can be chosen. Select the new wallpaper from the list or press the X icon in
thetopright-handcornertoclosethewindowwithoutmakingchanges.
3.1.3 Changing the language of the Video door phone
To change the language of the Video door phone, follow the procedure below:
•Switchonthescreen,ifswitchedo,bytouchingitanywhereorpressingtheHomebutton.
•Press the icon to access the Top Page.
•Press the icon toaccessthevideodoorphoneparametercongurationpage.
•Press on the item Language(theactivelanguageisshowntotheright)todisplayapop-upwindowin
which you can choose the language of the video door phone. Select the new language from the list or
press the Xicon at the top right to close the window without making changes.

6DS1760-034
3.1.4 Change the time format
To change the time format of the video door phone, follow the procedure below:
•Switchonthescreen,ifswitchedo,bytouchingitanywhereorpressingtheHomebutton.
•Press the icon to access the Top Page.
•Press the icon toaccessthevideodoorphoneparametercongurationpage.
•Press on the Date and Timetodisplaythescreenwiththecongurableparameters:
–Change Date and Time: allows you to select the date and time to be set on the video door phone.
–Timezone: allows you to select the time zone to be set on the video door phone.
–Time format: allows the format of the displayed time to be changed: 24 hours or 12 hours.

DS1760-034 7
3.1.5 Activate WiFI on video door phone
WiFi can be activated on the video door phone in order to use the call forwarding function and to surf the
Internet via the Firefox app on the Top Page.
•Switchonthescreen,ifswitchedo,bytouchingitanywhereorpressingtheHomebutton.
•Press the icon to access the Top Page.
•Press the icon toaccessthevideodoorphoneparametercongurationpage.
•Press on WiFitodisplayapop-upwindowinwhichyoucanactivatethedevice’sWiFi.
•Press ON to activate WiFi, then select the network to connect to.

8DS1760-034
•Press All Networks to display the networks detected by the video door phone.
•Select the network you wish to connect to.
•Enter the password and then press CONFIRM.
•If the connection to the network has been made correctly, the following icon will appear in the top
right-handbar .

DS1760-034 9
3.1.6 Conguringthecallforwardingfunction(masteronly)
Thecallforwardingfunctionallowsaudio-videooraudio-onlycallforwardingtooneormoresmartphones
with Android or IOS operating system.
On the smartphone, connected to the Internet via its own cellular data connection, or even WiFi, the
Urmet CallMe App must instead be installed in order to receive the call.
WARNING! To enable the function, a router must be present to provide Internet access to the video door
phone.
Followthestepsbelowtocongureandactivatethecallforwardingfunction:
•Switchonthescreen,ifswitchedo,bytouchingitanywhereorpressingtheHomebutton.
•Press the icon to access the Top Page.
•Press the icon toaccessthevideodoorphoneparametercongurationpage.
•Press on Advance settingstodisplaythefollowingscreenwiththeparametersforconguringand
activating the function.
•Press on Installationandcongurationtostartthefunctioncongurationprocedure.

10 DS1760-034
•AfterafewsecondsthevideodoorphonewillswitchtocongurationmodeandaQRcodewillappear
on the display.
•CongurethefunctionviatheUrmetCallMe Set app available for smartphones.
•Forthecompletecongurationprocedureofthecallforwardingfunctionpressthefollowinglinkto
download the CallMe Set app conguration booklet.
•Byactivatingthefunction,thevideodoorphoneautomaticallycongurestheRemotestatus .
•Oncethecongurationphaseiscomplete,thecallforwardingfunctionmenuscreen is displayed.
•Ontheuser’ssmartphone,itisnecessarytopairthevideodoorphoneviatheappCallMe, on the
video door phone press on QR CodetodisplaythepairingQRCode.

DS1760-034 11
•Fortheproceduretoactivatethecallforwardingfunctionontheuser’ssmartphone,seechapter“Call
Forwarding Service Activation” in the CallMe app conguration booklet.
•By activating the function when receiving a call from the call station, smartphones on which the CallMe
apphasbeeninstalledandconguredwillringinadditiontothevideodoorphone.
3.1.6.1 Maintenance mode (installer only)
Maintenance mode allows the installer to test calls with the CallMe Set App using the account used to
congurethecallforwardingfunction.Withmaintenancemodeactive,callstotheuser’saccountwillbe
temporarilydisabled.Inadditiontocalltests,itisalsopossibletoupdatethedevice’srmwareviathe
CallMe Set app.
Maintenancemodeisonlyavailableafterconguringthecallforwardingfunction.
MaintenancemodealsoallowsthedoorphonermwaretobeupdatedviatheCallMeSetApp.
For the rmware update procedure, click on the following link and download the CallMe Set app
conguration booklet to update via the app or see chap. Firmware Update in this document to carry
out the procedure via Micro SD card.
To enter maintenance mode, follow the steps below:
•In the Call Forwarding Settings menu, press on Maintenance Mode.

12 DS1760-034
•Thedisplaypromptsapop-upwindowinwhichmaintenancemodecanbeactivated.
•Press YES to enable the mode. Press NOtoclosethepop-upandreturntothecallforwardingfunction
menu screen.
•By enabling the maintenance mode, the display shows the following screen:
•Maintenance mode is characterised by the green colour at the top and bottom of the display and the
indication Maintenance mode in the middle of the top bar.
•AQRcodeisshownonthedisplaythatallowsthermwaretobeupdatedviatheCallMeSetapp(for
more details, please refer to the CallMe Set app conguration booklet).
•To exit maintenance mode, press on “Maintenance Mode”and select YESonthepop-upthatappears
on the display.

DS1760-034 13
3.1.7 Changing the brightness of the video door phone
To change the brightness of the video door phone, follow the procedure below:
•Switchonthescreen,ifswitchedo,bytouchingitanywhereorpressingtheHomebutton.
•Press the icon to access the Top Page.
•Press the icon toaccessthevideodoorphoneparametercongurationpage.
•Press on Screen Brightness to display a pop-up window in which the screen brightness can be
adjusted.
•Movetheadjustmentbartocongurethebrightnessofthescreen.

14 DS1760-034
3.1.8 Conguringtheautomaticswitch-oofscreen
The AutomaticScreenPowerO function allows the user to set the idle time after which the video door
phonescreenswitcheso.
•Switchonthescreen,ifswitchedo,bytouchingitanywhereorpressingtheHomebutton.
•Press the icon to access the Top Page.
•Press the icon toaccessthevideodoorphoneparametercongurationpage.
•Press on AutomaticScreenPowerOtodisplayapop-upscreenwhereyoucanselecttheidletime
beforeswitchingothescreen.
•Selectthetimeyouwishtocongureonthevideodoorphone.

DS1760-034 15
3.1.9 Congurethealarms
The Alarmsfunctionprovidesaccesstoamenuinwhichvideodoorphonealarmscanbecongured.
•Switchonthescreen,ifswitchedo,bytouchingitanywhereorpressingtheHomebutton.
•Press the icon to access the Top Page.
•Press the icon toaccessthevideodoorphoneparametercongurationpage.
•Press on Alarmstodisplayamenuwithalarmcongurationparameters.
•The various items in the alarm menu are described in detail below.

16 DS1760-034
3.1.9.1 Reset alarms
The following function allows the alarm status to be reset.
To reset, follow the procedure below:
•Go to alarm menu and press Reset alarms.
–Reset panic alarm: enables resetting the panic alarm status.
–Reset alarm input 1 (Intrusion): enablesresettingthestatusofalarm1(intrusionalarm).
–Reset alarm input 2 (Technological): resetsthestatusofalarm2(technologicalalarm).
3.1.9.2Congurepanicalarm
Thefollowingitemallowsthepanicalarmparameterstobecongured.
Followthestepsbelowtocarryouttheconguration:
•Within the alarm menu, press on the item CongurePanicAlarm.
–Enable Yokis: byenablingthisparameter,apreviously conguredYokiscommandorscenario
can be activated after the panic alarm has been sent.
–Enable special decoding: by enabling the following parameter, a special code can be activated on
a special decoding Ref. 1083/80 present in the system, after the panic alarm was sent.
–Set custom message: it is possible to set a custom message that will be shown on the display of
the video door phone after the panic alarm has been sent.

DS1760-034 17
3.1.9.3CongureinputofAlarm1(intrusion)
Thefollowingitemallowstheparametersoftheintrusionalarmtobecongured.
Followthestepsbelowtocarryouttheconguration:
•Within the alarm menu, press on the item CongureinputofAlarm1(intrusion).
–Enable Yokis: byenablingthefollowingparameter,apreviouslyconguredYokiscommandor
scenario can be activated after the intrusion alarm has been sent.
–Enable special decoding: by enabling the following parameter, a special code can be activated
on a special decoding Ref. 1083/80 present in the system, after the intrusion alarm has been sent.
–Set custom message: it is possible to set a custom message that will be shown on the display of
the video door phone after the intrusion alarm has been sent.
3.1.9.4CongureAlarmInput2(technological)
Thefollowingitemallowsyoutocongurethetechnologicalalarmparameters.
Followthestepsbelowtocarryouttheconguration.
•Within the alarm menu, press on the item CongureAlarmInput2(technological).
–Enable Yokis: byenablingthefollowingparameter,apreviouslyconguredYokiscommandor
scenario can be activated after å technological alarm has been sent.
–Enable special decoding: by enabling the following parameter, a special code can be activated on
a special decoding Ref. 1083/80 present in the system, after the technology alarm has been sent.
–Set custom message: it is possible to set a customised message that will appear on the display
of the video door phone after the technology alarm has been sent.

18 DS1760-034
3.1.9.5Congureoorcall
Thefollowingitemallowstheoorcallparameterstobecongured.
Followthestepsbelowtocarryouttheconguration:
•Within the alarm menu, press on the item Congureoorcallcontact.
–Enable Yokis: enablingthefollowingparameteractivatesapreviouslyconguredYokiscommand
orscenariowhenaoorcallismade.
–Enable special decoding: by enabling the following parameter, a special code can be activated on
aspecialdecodingRef.1083/80presentinthesystem,whenaoorcallismade.
–Set custom message: it is possible to set a custom message that will be shown on the display of
thevideodoorphonewhenaoorcallismade.
3.1.10 Enabling the key reader MIFARE
The following parameter enables the MIFARE key reader on the video door phone.
•Switchonthescreen,ifswitchedo,bytouchingitanywhereorpressingtheHomebutton.
•Press the icon to access the Top Page.
•Press the icon toaccessthevideodoorphoneparametercongurationpage.

DS1760-034 19
•Press on the MIFAREitemtodisplayapop-upwindowrequestingauthorisationtoactivatetheMIFARE
key reader.
•Press YES to enable the MIFARE key reader, pressing NO cancels the operation and returns to the
congurationmenu.
•To disable the MIFARE key reader, repeat the procedure described above.
3.1.11 Maintenance
The Maintenance item provides access to a menu in which a series of parameters are available for
carrying out maintenance operations on the video door phone.
•Switchonthescreen,ifswitchedo,bytouchingitanywhereorpressingtheHomebutton.
•Press the icon to access the Top Page.
•Press the icon toaccessthevideodoorphoneparametercongurationpage.

20 DS1760-034
•Press on the Maintenance item to display the maintenance functions and parameters of the video
door phone.
3.1.11.1Videodoorphonermwareversion
Thermwareversionofthevideodoorphoneandmicrocontrollercanbedisplayed.
•Within the maintenance menu display the item Version.
•Ontheright-hand side, thevideodoorphonermware version ‘1.0.0_135’andthemicrocontroller
rmwareversion[N:1.0.0-57,μ2V:AE].