V-TAC VT-5147 User manual

INSTALLATION INSTRUCTION
Waterproof+Temperature Sensor(VT-5147) &
Temperature-Humidity(VT-5146)
(Temperature Humidity Scheduler Not Included)
WEEE Number: 80133970
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC Product. V-TAC will serve you the best.
Please read these instructions carefully before starting the installation and keep this
manual handy for future reference. If you have any other query, please contact our
dealer or local vendor from whom you have purchased the product. They are trained
and ready to serve you at the best. The warranty is valid for 2 years from the date of
purchase. The warranty does not apply to damage caused by incorrect installation or
abnormal wear and tear. The company gives no warranty against damage to any surface
due to incorrect removal and installation of the product.
2
YEAR
WARRANTY
*
Temperature Waterproof
Probe (VT-5147)
Temperature & Humidity
Sensor (VT-5146)
works with

SPECIFICATIONS
INSTALLATION
SKU
Model Number Wire Length Material 
8468
VT-5146 0.5 Meter ABS IP20
8469
VT-5147 1 Meter ABS IP65
Voltage
DC:5V
DC:5V
Frequency
50/60Hz
50/60Hz
Temperature
Waterproof Probe
(VT-5147))
Temperature &
Humidity Sensor
(VT-5146)
V-TAC SMART HOME APP: Download V-TAC SMART HOME APP by going to APP Store
or Google PLay Store (OR) Download the VTAC SMART HOME APP by scanning the
below QR Code


FAQ 
Manual
GOOGLE PLAY IOS
L
N
Wiring

2) Connect the wires correctly.
3) Install and power it up.

V-TACs Temperature Humidity Scheduler.These can
be connected directly with the device.

Step2: To Add a New device tap on the
“+” sign(as shown)
Step3: Make sure your Smart Device is Powered.

6 seconds to make the device available in
Pairing Mode. Once in pairing mode the

2)Tap on Next to start the pairing of device
with the app. (Shown in the image)
Note: If you are facing any trouble while
pairing in Quick Pairing mode please try to

(Click on the linkas shown on the image).
Step1: Open the V-TAC Smart Home App
and register. 
account with V-TAC Smart Home, please
proceed to logging in.

Step5: Give a Name to your Device
(Ex: Temp Humidity Switch) & Tap on
complete.
Step6: Your Device is now paired and will appear as shown below example image

connected with probe temperature sensors (VT-5146 Or VT-5147) to detect the
Temperature and Humidity.
Note: The Temperature value displays on the APP only when the Sensor is connected.

with the APP itwill display temperature and humidity values, and it can be set to Auto mode.
Scene Mode: You can use V-TACs Temperature Humidity Scheduler(Not Included) to collect


when the temperature reaches 24 degrees turn on the smart Plug. Note: The V-TACs
Temperature Humidity Scheduler should be in manual mode, not auto mode. When the


the password and Tap on Next.


below





Schedule the device to Turn ON/OFF



Step1:Install the Amazon Alexa app via the
App Store (iOS) or the Play Store (Android)

account with Amazon Alexa, please proceed
to logging in.
Step3: On the Home page of Amazon
Alexa App,Tap on the icon as shown
on the image below.
Step4: Tap on “Skills & Games” as show below
Step2: Once you are on the Amazon Alexa
home page, tap on the lower right icon ––
where the arrow is pointed–– to add a new
device and Enable Skills.
ALEXA SETTINGS

Step5: On the Search bar as shown below
type”V-TAC” and tap on the V-TAC skill
as shown on the image.
Step6: Tap on Enable Skill to link V-TAC
Smart Home app with Amazon Alexa.

Smart Home and then tap on Log In. If

register by tapping on the register.
a)
b)
Step8: a)Once you have successfully linked
V-TAC Skillclose the window &
(b)tap on Discover device. Make sure
Smart device is paired with V-TAC Smart
Home app.

Step9: Discover your smart device on Alexa. You can say”Alexa discover devices” to the
Alexa device which you have.(OR) you can add new devices manually by going to the
home page of Amazon alexa and tapping on the icon (Ref:image A) & tap on “+” sign
to add new device(Ref: Image B). Once the device is discovered you can now control your
smart device using Alexa.
Now, you can control your smart device using voice commands on Alexa. Below is a
example commands you can use:
Note: Discovering the device must be done every time the device’s name is changed
on the app.
!Alexa, turn ON Temperature switch
2. Make sure you have Amazon Alexa Device(including Echo, Echo Tap, or Echo Dot)
4. Stable Wifi network
1. V-TAC Smart Home App & Amazon Alexa App
3. Smart Home Device
!
!Alexa, turn OFF Temperature switch !
ALEXA Commands
THINGS TO REMEMBER BEFORE STARTING INSTALLATION:
Image A Image B

Step2: Once you are on the Google home page, tap on the Add “+” icon– to add a new
device and skill. And then tap on Set up device as shown in below image.
GOOGLE HOME SETTINGS
Step1:
a&b) Install the Google Home app via the App Store (iOS) or the Play Store (Android) and

logging in.

d) Power ON the Google Home device and connect it to the App.(Then Proceed to step 2)
a. b.
c.
d.
a. b.

Step3: Make sure the Smart Device is paired


highlighted in the below image.
Step4: Type “Vtac” on the search bar and
tap on the icon from the drop down

Step5: Sign In with your V-TAC Smart Home

device
Step6:
a. Account will now be linked, please stay
on the page you will be redirected in few
seconds to select the device to add to your
home.
b. Select the device and tap on Next as
show in image(b)
Account is now Linked
a.
b.