V-tech My Beary First Steps User manual

®
LITTLE SMART
USER'S MANUAL
© VTECH
Printed in China
91-01360-004

1
Dear Parent:
At VTECH®we know that a child has the ability to do great things.
That’s why all of our electronic learning products are uniquely
designed to develop a child’s mind and allow them to learn to the
best of their ability. Whether it’s introducing numbers and let-
ters, identifying colors and shapes, or stimulating senses with
lights and music, all VTECH® infant and toddler learning prod-
ucts encourage your child’s natural growth and discovery skills.
When it comes to providing electronic learning products that en-
lighten, entertain and develop minds, at VTECH®we see the po-
tential in every child.

2
INTRODUCTION
Thank you for purchasing the LITTLE SMART My Bear-y First Steps™
learning toy!Thisproductisone ofa familyof high-qualityLITTLESMART®
electronic learning toys. We at VTECH®are committed to providing the
best possible products to entertain and educate your child. Should you
have any questions or concerns, please call our Consumer Services
Departmentat1-800-521-2010 in theU.S.or1-800-267-7377 in Canada.
The LITTLE SMART My Bear-y First Steps™ learning toyis specifically
designed for infants aged 6 months and up. The LITTLE SMART My
Bear-y First Steps™ learning toy is both a functional walker and an
electronic activity panel. Your child will enjoy learning about numbers,
colors, letters and music notes while learning to walk at the same time!
The electronic activity panel can be easily detached from the bear’s body
for take-along fun!
1
3
4
5
Bb
Aa
Cc
BEAR BODY
POPPING
BUTTERFLIES
FRONTWHEELS
HANDLE
BACKWHEELS
CORDLESS
PLAY PHONE
ON/OFF ACTIVITY
SELECTOR SWITCH
BEAR BUTTON
BIRD BUTTON
NUMBER/MUSIC
NOTE BUTTONS
ROLLER BALL
LETTER BUTTONS
MIRROR
DETACHABLE
ACTIVITY PANEL
BACK LEGS
PARENTAL SAFETY
BRAKE
2

3
INCLUDED IN THIS PACKAGE
- OneVTECH®LITTLE SMARTMy Bear-y First Steps™ learningtoy.
- One instruction manual.
WARNING: All packing materials such as tape, plastic sheets, wire
ties and tags are not part of this toy, and should be
discarded for your child’s safety.
BATTERY INSTALLATION
1. Make sure the unit is turned off.
2. Locatethe battery coveronthe bottom
of the Detachable Activity Panel.Use
a coin or screwdriver to loosen the
screw.
3. Install 2 new “AA” (UM-3/LR6)
batteries following the diagram inside
the battery box. (The use of new
alkalinebatteries isrecommended for
maximum performance.)
4. Replace the battery cover and tighten
the screw to secure the battery cover.

4
BATTERY NOTICE
• Install batteries correctly observing the polarity (+, -) signs to avoid
leakage.
• Do not mix old and new batteries.
• Do not use batteries of different types.
• Remove exhausted or new batteries from the equipment when the
unit will not be used for an extended period of time.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.
NOTE: Ifforsomereason theprogram/activitystopsworking, then please
follow these steps:
1.Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3.Let the unit stand for a few minutes, then replace the batteries.
4.Turn the unit ON.The unit should now be ready to play again.
If the problem persists, please call our Consumer Services De-
partment at 1-800-521-2010 in the U.S. or 1-800-267-7377 in
Canada, and a service representative will be happy to help you.

5
ASSEMBLY INSTRUCTIONS
1. Place the leg into the walker as
shown. Put the leg into the slot as
far as it can go. Test to make sure
the leg is locked securely in place.
2. Repeatthis procedure withthe other
leg.
NOTE: Oncethe legs have beenattached and securelylockedinto place,
the legs cannot be removed from the walker.
TO BEGIN PLAY
1. Slide the ON/OFF/ACTIVITY
SELECTOR SWITCH to the
TALKING ACTIVITY ( ) or the
MUSIC ACTIVITY ( ) position to
turn the unit ON. You will hear “Let’s
go!” followed by a bear laughing
sound effect. All the number/music
note buttons will flash.
2. Toadjustthevolume,slidetheVOLUME
CONTROL SWITCH located on the
back of the activity panel to ( ) for
LOW VOLUME or ( ) for HIGH
VOLUME.
Let's go!

6
3. Slide the ON/OFF/ACTIVITY
SELECTORSWITCH totheMIDDLE
POSITION ( ) to turn the unit OFF.
4. Place the activity panel onto the
walkemelodies will play randomly.
AUTOMATIC SHUT-OFF
To preserve battery life, the LITTLE SMART My Bear-y First Steps™
learning toy will turn off automatically after a few minutes without input.
The unit can be turned on again by pressing any button.
1
2
3
4
5
Aa
Cc
Bb

7
Parental Safety Brake Instructions
1. The parental safety brake is
located on the front wheel to
enable and disable the walker
wheels.
2. Slidethebrakeleverfrom left to right
to disable the wheel movement.
•Make sure the lever securely locks
on the wheel.
3. Slide the brake lever from right
back to left to enable the wheels.

8
HOW TO ATTACH AND REMOVE THE
ELECTRONIC ACTIVITY PANEL
1. Slide the lock up and lift up on the
electronic activity panel, removing it
from the walker.
2. The electronic activity panel comes
with a carry handle for easy take-
along play. Your child will enjoy its
portability while learning about
colors, numbers, animals, shapes
and more!
ACTIVITIES
A. Talking Activity
1. Slide the ON/OFF/ACTIVITY
SELECTOR SWITCH to the
TALKING ACTIVITY ( )
position. You will hear “Let’s go!”
followed by a bear laughing sound
effect. The number/music note
buttons will flash randomly with the
voice and sound effect.
1
2
3
4
5
Bb
Aa
Cc
Let's go!

9
2. Press any LETTER BUTTON to
hearthe letter identified followedby
a short tune. The number/music
note buttons will flash.
3. Press the BEAR BUTTON to hear
“I’m a bear!” followed by a bear
singing. The number/music note
buttons will flash.
4. Press the BIRD BUTTON to hear
“Hello bird!” followed by a bird
sound effect. The number/music
note buttons will flash.
A
Aa
I’m a bear!
Hello bird!