Vaisala HMP3 User manual

M212022EN-D
User Guide
Vaisala Indigo compatible
humidity and temperature probes
HMP3, HMP4, HMP5, HMP7, HMP8, HMP9, MMP8, TMP1
陕西威瑞仪器仪表有限公司 生产代理销售：实验检测设备 气象科学仪器设备
Tel:[phone] Web:www.xavery.cn Email:[email protected]

PUBLISHED BY
Vaisala Oyj
Vanha Nurmijärventie 21, FI-01670 Vantaa, Finland
P.O. Box 26, FI-00421 Helsinki, Finland
[phone]
Visit our Internet pages at www.vaisala.com.
© Vaisala Oyj 2020
No part of this document may be
reproduced, published or publicly
displayed in any form or by any means,
electronic or mechanical (including
photocopying), nor may its contents be
modified, translated, adapted, sold or
disclosed to a third party without prior
written permission of the copyright holder.
Translated documents and translated
portions of multilingual documents are
based on the original English versions. In
ambiguous cases, the English versions are
applicable, not the translations.
The contents of this document are subject
to change without prior notice.
Local rules and regulations may vary and
they shall take precedence over the
information contained in this document.
Vaisala makes no representations on this
document’s compliance with the local
rules and regulations applicable at any
given time, and hereby disclaims any and
all responsibilities related thereto.
This document does not create any legally
binding obligations for Vaisala towards
customers or end users. All legally binding
obligations and agreements are included
exclusively in the applicable supply
contract or the General Conditions of Sale
and General Conditions of Service of
Vaisala.
This product contains software developed
by Vaisala or third parties. Use of the
software is governed by license terms and
conditions included in the applicable
supply contract or, in the absence of
separate license terms and conditions, by
the General License Conditions of Vaisala
Group.
陕西威瑞仪器仪表有限公司 生产代理销售：实验检测设备 气象科学仪器设备
Tel:[phone] Web:www.xavery.cn Email:[email protected]

Table of contents
1. About this document.....................................................................................7
1.1 Version information.......................................................................................... 7
1.2 Related manuals................................................................................................7
1.3 Documentation conventions........................................................................... 8
1.4 Trademarks........................................................................................................ 8
2. Product overview............................................................................................ 9
2.1 Probe structure................................................................................................. 9
2.2 Basic features and options.............................................................................. 9
2.3 Output parameters......................................................................................... 10
2.4 Additional features with Indigo 200 series transmitters.............................11
2.5 Safety................................................................................................................. 11
2.6 ESD protection.................................................................................................12
2.7 Regulatory compliances................................................................................. 12
2.7.1 FCC Part 15 compliance statement.........................................................12
2.7.2 Canada ICES-003 compliance statement............................................. 13
3. Installation........................................................................................................14
3.1 HMP3 probe......................................................................................................15
3.2 HMP4 probe..................................................................................................... 16
3.3 HMP5 probe......................................................................................................17
3.4 HMP7 probe......................................................................................................18
3.5 HMP8 probe..................................................................................................... 19
3.5.1 Attaching ball valve kit to process........................................................20
3.6 HMP9 probe......................................................................................................21
3.6.1 Installing HMP9 through a cable gland.................................................22
3.7 MMP8 probe.................................................................................................... 23
3.8 TMP1 probe......................................................................................................24
3.9 Wiring...............................................................................................................25
4. Configuration with Insight software..................................................... 27
4.1 Vaisala Insight software................................................................................. 27
4.2 Installing driver for the USB service cable...................................................27
4.3 Connecting to Insight software.................................................................... 28
4.4 Configuration options.................................................................................... 29
5. Using probe with Indigo transmitters................................................... 31
5.1 Indigo 200 series transmitter overview........................................................31
5.2 Attaching probe to Indigo 200 series transmitter..................................... 33
5.3 Wireless configuration interface overview..................................................34
5.4 Connecting to wireless configuration interface..........................................34
5.5 Logging in to wireless configuration interface........................................... 35
6. Maintenance....................................................................................................36
6.1 Cleaning the probe.........................................................................................36
6.1.1 Chemical tolerance................................................................................. 36
Table of contents
1
陕西威瑞仪器仪表有限公司 生产代理销售：实验检测设备 气象科学仪器设备
Tel:[phone] Web:www.xavery.cn Email:[email protected]

6.2 Changing the probe filter.............................................................................. 37
6.3 Replacing the HUMICAPâR2 sensor...........................................................37
6.4 Calibration and adjustment...........................................................................39
6.4.1 Adjustment points and requirements.................................................. 40
6.4.2 Adjusting measurement with Insight software.................................... 41
6.4.3 Adjusting measurement with Indigo 200 transmitter........................42
7. Troubleshooting............................................................................................46
7.1 Problem situations......................................................................................... 46
7.2 Error messages...............................................................................................46
8. Technical data................................................................................................49
8.1 HMP3 specifications.......................................................................................49
8.2 HMP4 specifications....................................................................................... 52
8.3 HMP5 specifications....................................................................................... 55
8.4 HMP7 specifications....................................................................................... 58
8.5 HMP8 specifications........................................................................................ 61
8.6 HMP9 specifications.......................................................................................64
8.7 MMP8 specifications.......................................................................................67
8.8 TMP1 specifications........................................................................................ 70
8.9 Accessories and spare parts..........................................................................72
Appendix A: Modbus reference...................................................................77
A.1 Default communication settings...................................................................77
A.2 Function codes................................................................................................77
A.3 Data encoding.................................................................................................77
A.3.1 32-bit floating point or integer format................................................. 78
A.3.2 16-bit integer format............................................................................... 78
A.4 Modbus registers............................................................................................ 78
A.4.1 Measurement Data Registers.................................................................79
A.4.2 Configuration registers...........................................................................82
A.4.3 Device identification objects................................................................. 85
A.4.4 Status registers........................................................................................85
A.4.5 Test value registers..................................................................................87
A.4.6 Modbus communication examples....................................................... 88
Online store....................................................................................................... 91
Warranty.............................................................................................................91
Technical support.............................................................................................91
Recycling............................................................................................................91
HMP3, HMP4, HMP5, HMP7, HMP8, HMP9, MMP8, TMP1 User Guide M212022EN-D
2
陕西威瑞仪器仪表有限公司 生产代理销售：实验检测设备 气象科学仪器设备
Tel:[phone] Web:www.xavery.cn Email:[email protected]

List of figures
Figure 1 Probe parts......................................................................................................... 9
Figure 2 Example installation........................................................................................14
Figure 3 HMP3 probe dimensions................................................................................15
Figure 4 HMP4 probe dimensions................................................................................16
Figure 5 HMP5 probe dimensions................................................................................17
Figure 6 Optional mounting flange 210696 dimensions....................................... 17
Figure 7 HMP7 probe dimensions................................................................................18
Figure 8 HMP8 probe dimensions................................................................................19
Figure 9 HMP9 probe dimensions................................................................................21
Figure 10 Installing HMP9 probe head through a cable gland..............................22
Figure 11 MMP8 dimensions...........................................................................................23
Figure 12 TMP1 probe dimensions................................................................................ 24
Figure 13 M12 5-pin A-coded male connector pinout............................................. 25
Figure 14 RS-485 wiring.................................................................................................. 25
Figure 15 Connecting probe to Insight........................................................................29
Figure 16 HMP5 in Insight software..............................................................................30
Figure 17 HMP7 attached to Indigo 200 series transmitter....................................31
Figure 18 HMP7 attached to Indigo 200 series transmitter with a cable...........32
Figure 19 Attaching the probe to Indigo 200 series transmitter......................... 33
Figure 20 Enabling and accessing wireless configuration interface
of Indigo 200................................................................................................... 34
Figure 21 Indigo login view.............................................................................................35
Figure 22 HMP3 probe head with filter removed......................................................38
Figure 23 Calibration page in the Indigo 200 wireless
configuration interface..................................................................................44
Figure 24 HMP3 humidity measurement accuracy as a function of
temperature..................................................................................................... 50
Figure 25 HMP3 temperature measurement accuracy over full range...............50
Figure 26 HMP3 probe dimensions...............................................................................52
Figure 27 HMP4 humidity measurement accuracy as a function of
temperature......................................................................................................53
Figure 28 HMP4 temperature measurement accuracy over full range............... 53
Figure 29 HMP4 probe dimensions...............................................................................55
Figure 30 HMP5 humidity measurement accuracy as a function of
temperature..................................................................................................... 56
Figure 31 HMP5 temperature measurement accuracy over full range............... 56
Figure 32 HMP5 probe dimensions...............................................................................58
Figure 33 HMP7 humidity measurement accuracy as function of
temperature......................................................................................................59
Figure 34 HMP7 temperature measurement accuracy over full range............... 59
Figure 35 HMP7 probe dimensions................................................................................61
Figure 36 HMP8 humidity measurement accuracy as a function of
temperature......................................................................................................62
Figure 37 HMP8 temperature measurement accuracy over full range............... 62
Figure 38 HMP8 probe dimensions.............................................................................. 64
List of figures
3
陕西威瑞仪器仪表有限公司 生产代理销售：实验检测设备 气象科学仪器设备
Tel:[phone] Web:www.xavery.cn Email:[email protected]

Figure 39 Optional ball valve installation kit dimensions.......................................64
Figure 40 HMP9 probe dimensions...............................................................................67
Figure 41 Awmeasurement accuracy.......................................................................... 68
Figure 42 MMP8 dimensions...........................................................................................69
Figure 43 TMP1 temperature measurement accuracy over full range.................70
Figure 44 TMP1 probe dimensions................................................................................. 71
Figure 45 Optional duct kit 215003 dimensions........................................................72
HMP3, HMP4, HMP5, HMP7, HMP8, HMP9, MMP8, TMP1 User Guide M212022EN-D
4
陕西威瑞仪器仪表有限公司 生产代理销售：实验检测设备 气象科学仪器设备
Tel:[phone] Web:www.xavery.cn Email:[email protected]

List of tables
Table 1 Document versions (English)...........................................................................7
Table 2 Related Manuals...................................................................................................7
Table 3 Availability of output parameters................................................................. 10
Table 4 Suitability of cleaning agents........................................................................36
Table 5 Troubleshooting table..................................................................................... 46
Table 6 Measurement performance............................................................................49
Table 7 Operating environment.................................................................................. 50
Table 8 Inputs and outputs............................................................................................ 51
Table 9 Mechanical specifications................................................................................51
Table 10 Measurement performance............................................................................52
Table 11 Operating environment...................................................................................54
Table 12 Inputs and outputs........................................................................................... 54
Table 13 Mechanical specifications...............................................................................54
Table 14 Measurement performance............................................................................55
Table 15 Operating environment................................................................................... 57
Table 16 Inputs and outputs............................................................................................57
Table 17 Mechanical specifications............................................................................... 57
Table 18 Measurement performance............................................................................58
Table 19 Operating environment.................................................................................. 60
Table 20 Inputs and outputs...........................................................................................60
Table 21 Mechanical specifications.............................................................................. 60
Table 22 Measurement performance.............................................................................61
Table 23 Operating environment...................................................................................63
Table 24 Inputs and outputs........................................................................................... 63
Table 25 Mechanical specifications...............................................................................63
Table 26 Measurement performance........................................................................... 64
Table 27 Operating environment...................................................................................65
Table 28 Inputs and outputs...........................................................................................66
Table 29 Mechanical specifications...............................................................................66
Table 30 Measurement performance............................................................................67
Table 31 Operating environment...................................................................................68
Table 32 Inputs and outputs........................................................................................... 68
Table 33 Mechanical Specifications.............................................................................. 69
Table 34 Measurement performance............................................................................70
Table 35 Operating environment...................................................................................70
Table 36 Inputs and outputs............................................................................................ 71
Table 37 Mechanical specifications................................................................................71
Table 38 Connection cables.............................................................................................72
Table 39 Accessories......................................................................................................... 73
Table 40 Spare parts..........................................................................................................73
Table 41 Spare parts..........................................................................................................73
Table 42 Accessories......................................................................................................... 73
Table 43 Spare parts..........................................................................................................74
Table 44 Accessories......................................................................................................... 74
Table 45 Spare parts..........................................................................................................74
List of tables
5
陕西威瑞仪器仪表有限公司 生产代理销售：实验检测设备 气象科学仪器设备
Tel:[phone] Web:www.xavery.cn Email:[email protected]

Table 46 Accessories......................................................................................................... 74
Table 47 Spare parts..........................................................................................................75
Table 48 Accessories......................................................................................................... 75
Table 49 Accessories......................................................................................................... 75
Table 50 Spare parts..........................................................................................................75
Table 51 Accessories......................................................................................................... 75
Table 52 Default Modbus serial communication settings....................................... 77
Table 53 Modbus function codes................................................................................... 77
Table 54 16-bit signed integer format details.............................................................78
Table 55 Floating point measurement data registers (read-only)....................... 79
Table 56 Integer measurement data registers (read-only)....................................80
Table 57 Modbus configuration data registers (writable)...................................... 82
Table 58 Device identification objects......................................................................... 85
Table 59 Modbus status data registers (read-only)................................................. 85
Table 60 Error codes in register 0203hex.....................................................................86
Table 61 Modbus test registers (read-only)............................................................... 87
HMP3, HMP4, HMP5, HMP7, HMP8, HMP9, MMP8, TMP1 User Guide M212022EN-D
6
陕西威瑞仪器仪表有限公司 生产代理销售：实验检测设备 气象科学仪器设备
Tel:[phone] Web:www.xavery.cn Email:[email protected]

1. About this document
1.1 Version information
This document provides instructions for installing, using, and maintaining Vaisala HUMICAPâ
Humidity and Temperature Probes HMP3, HMP4, HMP5, HMP7, HMP8, HMP9, Moisture in Oil
Probe MMP8, and Temperature Probe TMP1.
Table 1 Document versions (English)
Document code Date Description
M212022EN-D March 2020 Added content for HMP3 and MMP8 probe models.
M212022EN-C June 2019 Applicable from software version 1.0.9 onward. Added
content for HMP9 probe model. Other added content:
•Output parameters (page 10)
•Adjusting measurement with Indigo 200 transmitter
(page 42)
•Problem situations (page 46)
•Error messages (page 46)
•Status registers (page 85)
Updated content:
• Updated technical specifications and dimension
drawings of probe models
• Updated presentation of Modbus register maps
• Corrected numbering of decimal registers in section
Measurement Data Registers (page 79)
M212022EN-B June 2018 Applicable from software version 1.0.6 onward. Updated
instructions for connecting to Indigo transmitters.
Updated sections Measurement Data Registers (page 79)
and Configuration registers (page 82).
1.2 Related manuals
Table 2 Related Manuals
Document code Name
M211982EN HMP3, HMP4, HMP5, HMP7, HMP8, HMP9, MMP8, and TMP1 Quick Guide
Chapter 1 – About this document
7
陕西威瑞仪器仪表有限公司 生产代理销售：实验检测设备 气象科学仪器设备
Tel:[phone] Web:www.xavery.cn Email:[email protected]

1.3 Documentation conventions
Warning alerts you to a serious hazard. If you do not read and
follow instructions carefully at this point, there is a risk of injury or even death.
WARNING!
Caution warns you of a potential hazard. If you do not read and
follow instructions carefully at this point, the product could be damaged or
important data could be lost.
CAUTION!
Note highlights important information on using the product.
Tip gives information for using the product more eciently.
Lists tools needed to perform the task.
Indicates that you need to take some notes during the task.
1.4 Trademarks
Vaisalaâand HUMICAPâare registered trademarks of Vaisala Oyj.
All other product or company names that may be mentioned in this publication are trade
names, trademarks, or registered trademarks of their respective owners.
HMP3, HMP4, HMP5, HMP7, HMP8, HMP9, MMP8, TMP1 User Guide M212022EN-D
8
陕西威瑞仪器仪表有限公司 生产代理销售：实验检测设备 气象科学仪器设备
Tel:[phone] Web:www.xavery.cn Email:[email protected]

2. Product overview
HMP series probes are humidity and temperature measurement probes with a digital output
(Modbus protocol). The probes are designed for demanding humidity and temperature
measurement applications. The probes have a two-part structure, with measurement
electronics contained in the probe body and sensor(s) in the probe head. The probe body and
the probe head are connected by a cable. Length options for this connecting cable depend on
the probe model.
The probes are compatible with Vaisala Indigo transmitters. They can also be connected to
Vaisala Insight software for configuration, calibration, adjustment, diagnostics, and temporary
online monitoring.
2.1 Probe structure
1
2
3
4
5
6
7
8
Figure 1 Probe parts
1Protection cap (remove before use)
25-pin M12 connector
3Probe body with type label
4Status indicator:
Green Power on and probe online,
flashes when communicating
Red Error
O Power o or indicator
disabled
5Probe cable (do not cut)
6Probe head (HMP7 model shown)
7Location of sensor(s) on the probe
head. Most probe models have a
removable filter over the sensors that
can be replaced if it gets dirty or
damaged. Note that HMP9 and TMP1
do not have a removable filter.
8Protection cap (remove before use)
2.2 Basic features and options
• Comprehensive list of output parameters. For example: relative humidity, temperature,
dew point temperature, wet-bulb temperature, absolute humidity, mixing ratio, water
vapor pressure, enthalpy. See Output parameters (page 10).
• Sensor purge provides superior chemical resistance (HMP models only)
• Probe and sensor warming functions minimize condensation on probe (HMP models only)
Chapter 2 – Product overview
9
陕西威瑞仪器仪表有限公司 生产代理销售：实验检测设备 气象科学仪器设备
Tel:[phone] Web:www.xavery.cn Email:[email protected]

• Traceable calibration certificate:
• HMP and MMP models: 6 points for humidity, 1 point for temperature
• TMP1: 2 points for temperature
• Standalone Modbus RTU over RS-485
• Compatible with Indigo series of transmitters
• Can be connected to Vaisala Insight PC software for configuration, calibration,
diagnostics, and temporary online monitoring
2.3 Output parameters
On HMP probe models, the values of all available output parameters are always
locked when chemical purge or extra heat functions are heating the sensor.
Output parameter is available
Output parameter is available but its value is locked during sensor warming or probe
heating (HMP7 only) unless temperature is written to register 0334hex from an external
source
Output parameter is not available on this model
Table 3 Availability of output parameters
Output parameter Output unit HMP3, 4, 5,
7, 8, and 9
MMP8 TMP1
Relative humidity %RH
Temperature °C
Dew point temperature °C
Dew/frost point temperature °C
Dew/frost point temperature at 1 atm °C
Dew point temperature at 1 atm °C
Absolute humidity g/m3
Mixing ratio g/kg
Wet-bulb temperature °C
Water concentration ppmv
Water vapor pressure hPa
Water vapor saturation pressure hPa
Enthalpy kJ/kg
Water activity -
HMP3, HMP4, HMP5, HMP7, HMP8, HMP9, MMP8, TMP1 User Guide M212022EN-D
10
陕西威瑞仪器仪表有限公司 生产代理销售：实验检测设备 气象科学仪器设备
Tel:[phone] Web:www.xavery.cn Email:[email protected]

Output parameter Output unit HMP3, 4, 5,
7, 8, and 9
MMP8 TMP1
Dew point temperature dierence °C
Absolute humidity at NTP g/m3
Water concentration in oil ppmv
Relative saturation %RS
Water mass fraction ppmw
2.4 Additional features with Indigo 200 series
transmitters
Connecting the probe to an Indigo transmitter provides a range of additional options for
outputs, measurement viewing, status monitoring, and configuration interface access.
Examples of additional features available with Indigo 200 series transmitters include:
• 3.5” TFT LCD color display or non-display model with LED indicator
• Digital output or 3 analog outputs (depending on the transmitter model)
• 2 configurable relays
• Wireless browser-based configuration interface for mobile devices and computers (IEEE
802.11 b/g/n WLAN)
The selection of available additional features (for example, output and connectivity options)
varies depending on the Indigo transmitter model. For more information on Indigo
transmitters, see www.vaisala.com/indigo.
2.5 Safety
When returning a product for calibration or repair, make sure it
has not been exposed to dangerous contamination, and is safe to handle
without special precautions.
WARNING!
Do not attempt to open the probe body. There are no user
serviceable parts inside the probe body.
CAUTION!
Do not touch the probe head with your bare hands. Touching will
deposit impurities on the probe head.
CAUTION!
Chapter 2 – Product overview
11
陕西威瑞仪器仪表有限公司 生产代理销售：实验检测设备 气象科学仪器设备
Tel:[phone] Web:www.xavery.cn Email:[email protected]

Be aware that the probe head may become hot to touch when
functions such as chemical purge and probe heating are active.
CAUTION!
2.6 ESD protection
Electrostatic discharge (ESD) can cause immediate or latent damage to electronic circuits.
Vaisala products are adequately protected against ESD for their intended use. However, it is
possible to damage the product by delivering an electrostatic discharge when touching,
removing or inserting any objects inside the equipment housing.
Avoid touching component contacts or connectors when working with the device.
2.7 Regulatory compliances
The probes are in conformity with the provisions of the following EU directives:
• RoHS Directive
• EMC Directive
Conformity is shown by compliance with the following standards:
• EN 50581: Technical documentation for the assessment of electrical and electronic
products with respect to the restriction of hazardous substances.
• EN 61326-1: Electrical equipment for measurement, control, and laboratory use – EMC
requirements – intended for use in industrial locations.
• EN 55032: Information technology equipment – Radio disturbance characteristics – Limits
and methods of measurement.
2.7.1 FCC Part 15 compliance statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that the interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that of the receiver.
• Consult the dealer or an experienced radio/TV technician for help.
HMP3, HMP4, HMP5, HMP7, HMP8, HMP9, MMP8, TMP1 User Guide M212022EN-D
12
陕西威瑞仪器仪表有限公司 生产代理销售：实验检测设备 气象科学仪器设备
Tel:[phone] Web:www.xavery.cn Email:[email protected]

Changes or modifications to this equipment not expressly approved
by the party responsible for compliance could void the user's authority to
operate the equipment.
CAUTION!
2.7.2 Canada ICES-003 compliance statement
This Class B digital apparatus complies with Canadian ICES‑003.
Cet appareil numerique de la classe B est conforme a la norme NMB‑003 du Canada.
Chapter 2 – Product overview
13
陕西威瑞仪器仪表有限公司 生产代理销售：实验检测设备 气象科学仪器设备
Tel:[phone] Web:www.xavery.cn Email:[email protected]

3. Installation
When you choose the installation location for the probe, consider the following:
• Verify the operating environment specification of the probe model. The probe head
typically has a much wider operating temperature range than the probe body.
• If the temperature of the measured environment diers greatly from ambient
temperature, the entire probe head and preferably plenty of cable must be inside the
measured environment. This prevents measurement inaccuracy caused by heat
conduction along the cable.
• Probe mounting options are model-specific.
1
2
3
4
Figure 2 Example installation
1Mount the probe head horizontally to prevent any water condensing on the probe head
from running to the sensors.
2Let the cable hang loosely to prevent condensed water from running along the cable to
the probe body or probe head.
3Attach the probe body to a wall or other surface using the two mounting clips (Vaisala
item 243257SP) supplied with the probe. Each clip attaches to the installation surface with
one screw (screw hole Ø 4.2 mm).
4Cable to Modbus master or Indigo transmitter.
The supplied mounting clips are not designed to withstand strong
vibration. Use other methods to secure the probe body if necessary. For
example, attach the probe body using a cable tie.
CAUTION!
More information
‣Default communication settings (page 77)
HMP3, HMP4, HMP5, HMP7, HMP8, HMP9, MMP8, TMP1 User Guide M212022EN-D
14
陕西威瑞仪器仪表有限公司 生产代理销售：实验检测设备 气象科学仪器设备
Tel:[phone] Web:www.xavery.cn Email:[email protected]

3.1 HMP3 probe
136 [5.35]
Probe cable 2 m [6.56 ft]
Ø 25
[0.98]
M12/5
98.5 [3.88]
78.5 [3.09]
37.5 [1.48]
Ø 5
[0.2]
Ø 12
[0.47]
M9x1
mm
[in]
Figure 3 HMP3 probe dimensions
Vaisala HUMICAPâHumidity and Temperature Probe HMP3 is a general purpose probe
designed for various industrial processes. The probe structure allows for replacing the sensor
without tools, making it suitable for applications such as paint booths and other industrial
applications where periodic recalibration alone is not sucient for maintaining the probe
performance. Other suitable applications include, for example, industrial HVAC systems,
cleanrooms, and environmental chambers.
• Operating temperature for probe head −40 … +120 °C (−40 … +248 °F)
• Operating temperature for probe body −40 … +80 °C (−40 … +176 °F)
If purchased with a composite sensor instead of the field replaceable HUMICAPâR2 sensor,
HMP3 can use the chemical purge feature. In environments with high concentrations of
chemicals and cleaning agents, the chemical purge option helps to maintain measurement
accuracy between calibration intervals.
Chapter 3 – Installation
15
陕西威瑞仪器仪表有限公司 生产代理销售：实验检测设备 气象科学仪器设备
Tel:[phone] Web:www.xavery.cn Email:[email protected]

3.2 HMP4 probe
136 [5.35]
Probe cable 2 m [6.56 ft]
Ø 25
[0.98]
M12/5
183 [7.20]
120 [4.72]
41 [1.61]
Ø 5
[0.2]
Fitting body NPT1/2” or M22×1.5
with sealing ring Ø22×27×1.5 Cu
Ø 12
[0.47]
32 mm 27 mm
mm
[in]
Figure 4 HMP4 probe dimensions
Vaisala HUMICAPâHumidity and Temperature Probe HMP4 is designed for high-pressure
applications such as compressed air systems in maritime, breathing air, and industrial
applications, where measurement performance and chemical tolerance are essential.
• Temperature measurement range −70 … +180 °C (−94 … +356 °F)
• Operating pressure 0 … 10 MPa (0 … 100 bar)
• Operating temperature for probe body −40 … +80 °C (−40 … +176 °F)
• M22×1.5 or NPT1/2” fitting body
Use a sealing ring (Ø22×27×1.5 Cu) with the M22×1.5 fitting. Replace the sealing
ring every time the probe is detached. Three sealing rings are supplied with the
fitting.
HMP3, HMP4, HMP5, HMP7, HMP8, HMP9, MMP8, TMP1 User Guide M212022EN-D
16
陕西威瑞仪器仪表有限公司 生产代理销售：实验检测设备 气象科学仪器设备
Tel:[phone] Web:www.xavery.cn Email:[email protected]

3.3 HMP5 probe
136 [5.35]
Ø 25
[0.98]
M12/5
41 [1.61]
253 [9.96]
243 [9.57]
Ø 12
[0.47]
Ø 13.5 [0.53]
Probe cable
2 m [6.56 ft] or 10 m [32.8 ft]
Ø 5
[0.2]
mm
[in]
Figure 5 HMP5 probe dimensions
mm
[in]
75 [2.95]
50 [1.96] 19 [0.75]
Figure 6 Optional mounting flange 210696 dimensions
Vaisala HUMICAPâHumidity and Temperature Probe HMP5 is designed for high-temperature
applications such as baking ovens, pasta dryers, and industrial drying kilns, where
measurement performance and chemical tolerance are essential.
• Temperature measurement range −70 … +180 °C (−94 … +356 °F)
Chapter 3 – Installation
17
陕西威瑞仪器仪表有限公司 生产代理销售：实验检测设备 气象科学仪器设备
Tel:[phone] Web:www.xavery.cn Email:[email protected]

• Operating temperature of probe body −40 … +80 °C (−40 … +176 °F)
• 250-mm (9.84 in) probe allows easy process installation through insulation
3.4 HMP7 probe
mm
[in]
136 [5.35]
Ø 25
[0.98]
M12/5
Ø 12
[0.47]
99.5 [3.92]
79.5 [3.13]
37.5 [1.48]
Groove for
lock ring
Ø 12
[0.47]
Ø 5
[0.2]
Probe cable
2 m [6.56 ft] or 10 m [32.8 ft]
Figure 7 HMP7 probe dimensions
Vaisala HUMICAPâHumidity and Temperature Probe HMP7 is designed for applications that
involve constant high humidity or rapid changes in humidity, such as drying and test
chambers, combustion air, and other humidifiers and meteorological measurements, where
measurement performance and chemical tolerance are essential.
• Temperature measurement range −70 … +180 °C (−94 … +356 °F)
• Operating temperature of probe body −40 … +80 °C (−40 … +176 °F)
• Probe heating and sensor warming functions minimize condensation on probe
• Vapor and pressure proof construction
Probe heating
HMP7 supports probe heating. Probe heating heats up not only the sensor, but the entire
probe head. When probe temperature is heated above dew point temperature, condensation
on the probe can be avoided while measuring the dew point temperature of the process.
HMP3, HMP4, HMP5, HMP7, HMP8, HMP9, MMP8, TMP1 User Guide M212022EN-D
18
陕西威瑞仪器仪表有限公司 生产代理销售：实验检测设备 气象科学仪器设备
Tel:[phone] Web:www.xavery.cn Email:[email protected]