Valcom InformaCast VIP-998-IC User manual

1 947584
CAUTION: To reduce the risk of electric shock,
Do not remove cover (or back).
No user serviceable parts inside.
Refer servicing to qualified service personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
ISSUE 1
VIP-998-IC
SIP STROBE ALERT
InformaCast® Compliant
(Amber, Blue or White)
INTRODUCTION
The VIP-998-IC InformaCast Compliant SIP
Strobe Alert is a private mode notification
appliance providing bright strobe functionality
with both power and activation provided by the
IP network. The VIP-998-IC is available in
three different colored flashers. Multiple
strobes may be synchronized to flash in
unison.
SPECIFICATIONS
Features
Cost effective and versatile solution to
applications requiring visual alerts or strobes
Power over Ethernet (PoE) 802.3af
compatible
SIP Night Ring functionality in conjunction
with other Valcom IP speakers
Synchronized strobing when used with
additional Valcom IP strobes
Available in Amber, Blue or White Flashers
Activation Methods
InformaCast Group Page
SIP Phone Call
Dimensions / Weight
5.5"H x 5"W x 2.0"D
(13.9cm H x 12.7cm W x 5.08cm D)
0.62 lbs. (0.27 kg)
Nominal Power Requirements
Via 802.3af PoE Ethernet Switch 6W
Environment
Temperature: 0 to +40° C
Humidity: 0 to 85% non-precipitating
Suitable for indoor installation
These products are intended for use with a UL
Listed power source marked “Class 2” or
“LPS” rated 24VDC, or 48VDC (PoE).
PoE and all interconnected ITE are intended
for intra-building.
Precautionary Designations
•WARNING-To Reduce The Risk Of Fire
Or Electric Shock. Do Not Expose This
Apparatus To Rain Or Moisture.
•AVERTISSEMENT - Afin de réduire les
risques d'incendie ou de décharge
électrique, évitez d'exposer le système à
la pluie ou à l'humidité.
•Apparatus shall not be exposed to
dripping or splashing and no objects
filled with liquids, such as vases, shall
be placed on the apparatus.
•L’appareil ne doit pas être exposé à des
égouttements et éclaboussures et
aucun Objet Rempli de liquide, comme
vase, ne doit être placé sur l’appareil.

2 947584
FCC Information
This equipment has been tested and found
to comply with the limits for a Class A
digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference when the equipment
is operated in a commercial environment.
This equipment generates, uses and can
radiate radio frequency energy and if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential
area may cause harmful interference in
which case the user will be required to
correct the interference at his own
expense.
INSTALLATION
Operation
The VIP-998-IC provides private mode
notification via network connection. Activation
of the strobe is triggered by including the
VIP-998-IC as a member of an InformaCast
Recipient Group. The VIP-998-IC can also
operate as a visual Night Ring device in
conjunction with a SIP PBX and can provide
audio Night Ring to other Valcom IP speakers
when activated. Interface to customer
telephone system can be via SIP registration
to a Voice over IP (VoIP) telephone system, or
FXO port (when used with a Valcom
Enhanced Station Port).
Mounting
The VIP-998-IC is designed for double gang
FD electrical box mounting. Verify depth of
electrical box is adequate for mounting the
VIP-998-IC. (See Figure 1)
NOTE: The VIP-998-IC can synchronize
with other Valcom IP strobes, but not with
other manufacturer’s devices. Therefore, it
must not be installed where the flash from
other, non-Valcom IP strobes may be seen.
Power Connections
The only method of powering the VIP-998-IC
is via a Power over Ethernet (PoE) switch or
power injector meeting the 802.3af
specification. Make all required signal
connections before connecting to Ethernet
switch or power injector meeting the 802.3af
specification.
Network Connection
The VIP-998-IC has one RJ-45 Network
connector.
Green LED: (Link) Indicates Ethernet
connection when illuminated.
Yellow LED: (Activity) Indicator flashes to
indicate network activity.
Use a standard Ethernet patch cable to
connect the NETWORK connector to an
Ethernet switch.
IMPORTANT SAFETY INFORMATION
CONSIGNES DE SÉCURITÉ IMPORTANTES
1. Read these instructions.
Lisez ces instructions.
2. Keep these instructions.
Conservez ces instructions.
3. Heed all warnings.
Respectez tous les avertissements.
4. Follow all instructions.
Suivez toutes les instructions.
5. Do not use this apparatus near water.
Ne pas utiliser cet appareil près de l'eau.
6. Clean only with dry cloth.
Nettoyer avec un chiffon sec.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
Ne pas bloquer les ouvertures de ventilation. Installer formément aux instructions du
fabricant.
8. Do not install near any heat sources such as radiators, heat registers, stoves or other
apparatus (including amplifiers) that produce heat.
Ne pas installer à proximité de sources de chaleur telles que radiateurs, registres de
chaleur, poêles ou autres appareils (y compris les amplificateurs) produisant de la chaleur.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade and the third prong are provided for your safety. If
the provided plug does not fit into your outlet consult an electrician for replacement of the
obsolete outlet.
Ne pas contourner le dispositif de sécurité de la fiche polarisée ou de mise à la terre. Une
fiche polarisée possède deux lames dont une plus large que l'autre. Une fiche de terre a
deux lames et une troisième broche de mise à la terre. La lame large et la troisième
broche sont fournies pour votre sécurité. Si la fiche fournie ne rentre pas dans votre prise,
veuillez consulter un électricien pour le remplacement de la prise obsolète.
10.Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
11.Only use attachments/accessories specified by the manufacturer.
N'utilisez que des fixations / accessoires spécifiés par le fabricant.
12. Use only with the cart, stand, tripod, bracket or table specified
by the manufacturer or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
Utilisez uniquement avec le chariot, stand, trépied, support ou table spécifié par le
fabricant ou vendu avec l'appareil. Quand un chariot est utilisé, Soyez prudent lorsque
vous déplacez l'ensemble chariot / appareil pour éviter des blessures dues au
renversement.
13. Unplug this apparatus during lightning storms or when unused for a long period of time.
Débranchez cet appareil pendant les orages ou lorsqu'il n'est pas utilisé pendant une
longue période de temps.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way. Such as when the power supply cord or plug is
damaged, liquid has been spilled, objects have fallen into the apparatus or the
apparatus has been exposed to rain or moisture and does not operate normally or has
been dropped.
Confiez toute réparation à un personnel qualifié. Une réparation est nécessaire lorsque
l'appareil a été endommagé de quelque façon. Par exemple lorsque le cordon
d'alimentation ou la fiche est endommagé, du liquide a été renversé, si des objets sont
tombés dans l'appareil ou le appareil a été exposé à la pluie ou à l'humidité et ne
fonctionne pas normalement ou s'il est tombé.

947584
3
Setup
The VIP-998-IC will automatically acquire an
IP address (using DHCP) and connect to the
InformaCast server when connected to the
network and powered up. Information specific
to your application will need to be
programmed into the InformaCast server.
Refer to the InformaCast documentation for
further Information.
TECHNICAL ASSISTANCE
Assistance in troubleshooting is available from
the factory. Call [phone] and press 1
for Technical Support or via email at
[e-mail].
When requesting assistance, you should
include all available information. General
information and troubleshooting procedures
are available on the Valcom website at
www.valcom.com.
Valcom equipment is not field repairable.
Valcom, Inc. maintains service facilities in
Roanoke, VA.
Should repairs be necessary, attach a tag to
the unit clearly stating your company name,
address, phone number, contact person and
the nature of the problem. Send the unit to:
Valcom, Inc.
Repair & Return Dept.
5614 Hollins Road
Roanoke, Va. 24019-5056
WARRANTY
Warranty information may be found on our
website at www.valcom.com/warranty
FIGURE 1