Vanguard VGFRG-2127-2130BK User manual

Elite Modular Front Runner
VGFRG-2127-2130BK
Installation Instruction
Thank you very much for choosing our products.
Please read the installation instruction carefully before using our product and be sure to
fully understand the contents mentioned above for subsequent installation.
In addition, please keep the installation instruction for product maintenance in future.
Attention
The following symbols are used in this installation instruction.
Relevant matters must be obeyed for safety.
Non-compliance may result in injury or other accidents.
Please read carefully and obey strictly.
Relevant matters must be obeyed for the smooth installation
and use.
Non-compliance may cause the problems with vehicle. Please do not install that is not
recorded in this instruction.
Please forgive that we are not responsible for any consequences arising from the
installation not according to our installation instruction.


Product Composition *Please confirm if it is missing.
1. Body 1 (2 pieces) 2. Body 2 (1 pieces) 3. Body 3(1
pieces)
4. Body 4(1
pieces)
5. Body 5(2
pieces)
6. Mount Bracket 1(2
pieces)
7. Mount Bracket 2(2
pieces)
8. Mount Bracket
3(2 pieces)
9. M10*30 Bolt
（
14
pieces
）
10. M10 Flat
Washer (20
pieces)
11. M10 Lock Washer (14
pieces)
12. M10 Bolt(6 pieces) 13. M12*30X1.5
Bolt
（
2 pieces
）
14. M12 Flat Washer
(6 pieces)
15. M12 Lock
Washer (6 pieces)
16. M12 Bolt(4 pieces) 17
、
M8 Bolts (4 piece) 18
、
M8 Flat Washer
(4 piece)
19
、
M8 Lock Washer
(4 piece)

Attentions
- The labels of fitting procedure inside the thick wireframe is particularly important. Pay attention to them in the
actual installation.
- Pay attention to safety during installation.
Fitting Procedure
Existing factory screw

9、10、11、12

TIPS:
= Routine Maintenance =
1) Please use neutral detergent to wet the soft cloth or suede and so on, then clean our product.