VAS 54 inch TV Console Glossy Black User manual

Model # HT5206
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
VAS Furniture Mfg. Inc. Factory No. 72-14494 Page 1
LOT No.:
DATE OF PURCHASE:
54" TV Console Glossy Black
ADULT ASSEMBLY REQUIRED
If you have any questions regarding assembly or if you are missing parts, do not return this item to
the Retailer Store. Please call our toll free customer service number and have your instructions
and parts list ready to provide the model name, part name or factory number:
1-866-942-5362 8:30 a.m. - 4:30 p.m. PST, Monday - Friday
ONLINE: www.whalenfurniture.com EMAIL: [email protected]
Video Instruction Guides
Go to http://whalen.showuhow.com to view step-by-step instructional
videos for assembling and installing your product. Enter the following
product number on the ShowUhow homepage.
HT5206

Model # HT5206
VAS Furniture Mfg. Inc. Factory No. 72-14494 Page 2
QUALITY GUARANTEE
We are confident that you will be delighted with your VAS Furniture purchase.
Should this product be defective in workmanship or materials or fail under normal
use, we will repair or replace it for up to 1 year from date of purchase. Every VAS
Furniture product is designed to meet your highest expectations. We guarantee
that you will immediately see the value of our fine furniture.
This warranty gives you specific legal rights and you may also have other rights
which vary from State to State.
Customer Service: 1-866-942-5362
8:30 a.m. - 4:30 p.m. PST Monday to Friday
www.whalenfurniture.com
MANUFACTURER: VAS Furniture
CATALOG: 54" TV Console Glossy Black (HT5206)
DATE OF MANUFACTURE: June, 2009
MADE IN CHINA
Please call for replacement parts or assistance: 1-866-942-5362
FITS UP TO MOST 60” FLAT PANEL TV’S
MAXIMUM LOAD 165 LBS
STOPPER
MAXIMUM SHELF LOAD 50 LBS
Make sure TV is
p
laced behind Sto
pp
er.
This unit is intended for use only with the products and maximum
weights indicated. Use with other products or products heavier than the maximum
weights indicated may result in instability causing possible injury.
Notes: Flat Panel TV’s with base support should be placed squarely in the center of
the stand with no overhanging on either side.

Model # HT5206
VAS Furniture Mfg. Inc. Factory No. 72-14494 Page 3
C- Le D- R E
Parts & Hardware List
Please read completely through the instructions and verify that all parts listed are
present before beginning assembly.
A- Front Frame (1) B- Back Frame (1)
ft Side Frame (1) ight Side Frame (1) - Top Glass (1)
Please call for replacement parts or assistance: 1-866-942-5362
F- Middle Glass Shelf (1) G- Bottom Glass Shelf (1)
(1)- 1 1/2” Bolt (6+1 extra) (2)- 5/8” Bolt (12+1 extra) (3)- Flat Washer (18+1 extra)
(4)- Glass Raiser (5)- Suction Cup (6)- Suction Cup with Thread (7)- Floor Leveler
(6) (6+1 extra) (3+1 extra) (4)
Allen Wrench (1) Touch Up Pen (1) Tipping Restraint Hardware Kit (2)
(Inside Plastic White Bag)
Tools Required: Allen Wrench (provided).

Model # HT5206
VAS Furniture Mfg. Inc. Factory No. 72-14494 Page 4
Assembly Instructions
Note: Please do not fully tighten all bolts until you finish assembling all parts, then go back and
fully tighten all bolts, this will make it easier during assembly of unit.
1. Unpack the unit and confirm that you have all the hardware and required parts listed.
2. Align and attach Left & Right Side Frame (C & D) to the Front Frame (A) using eight 5/8" Bolts (2)
with Flat Washer (3) through the plate holes in place, as shown in detail #1. DO NOT TIGHTEN
BOLTS UNTIL ASSEMBLY IS COMPLETE.
3. Attach Back Frame (B) to the last assembly using four 1 1/2" Bolts (1) with Flat Washers (3) through
the top rail of the Back Frame into the top threaded socket on the side frames, as shown in detail #2.
4. Proceed to attach the Back Frame (B) to both Side Frames (C & D) using four 5/8" Bolts (2) with Flat
Washers (3) through the bottom bracket on Back Frame in place. At the side of the TV stand secure
both Side Frames to the Back Frame using two 1 1/2" Bolts (1) with Flat Washers (3) through the
side frame into the threaded socket on the Back Frame, as shown in detail #2A. NOW FULLY
TIGHTEN ALL BOLTS WITH ALLEN WRENCH PROVIDED.
5. Attach Floor Levelers (7) to the posts of Front Frame and Back Frame (A & B) for the necessary
adjustment, as shown in detail #2A.
Please call for replacement parts or assistance: 1-866-942-5362

Model # HT5206
VAS Furniture Mfg. Inc. Factory No. 72-14494 Page 5
Assembly Instructions
6. Put the Suction Cups (part 5) onto the rail holes of Left & Right Side Frame (C & D) and screw three
Sucton Cup with Thread (part 6) into the threaded inserts on the bottom rail of Front Frame (A), as
shown in detail #3. Make sure they go all the way in.
7. At front side insert the Middle and Bottom Glass Shelf (F & G) in place as shown in detail #3.
8. Insert & screw six Glass Raisers (part 4) on the top holes of Front & Back Frame (A & B). Now place
the Top Glass (E) on top, make sure it is center. See detail #3.
Note: Make sure the Glass sits securely on the top of Suction Cups. If glass is scratched you
can repair by using a BLACK marker and filling in scratched area from underneath.
9. Position the assembled TV console on your desired location against the wall. Now follow the
instructions printed on the plastic white bag in order to mount the Tipping Restraint Hardware Kit to
the Back Frame (B) properly. As shown in detail #5.
NOTE: YOU MUST USE THIS TIPPING RESTRAINT TO ATTACH THIS UNIT TO THE WALL,
TO PREVENT ACCIDENTS AND/OR INJURIES.
10.The TV console is ready for use now. Be sure to position your TV in center of console with no
overhang on either side.
Please call for replacement parts or assistance: 1-866-942-5362

Model # HT5206
VAS Furniture Mfg. Inc. Factory No. 72-14494 Page 6
Option #1: AS A TV STAND
You can use this unit as a TV Stand to place your TV or Stereo components.
Option #2: TV STAND & PLASMA FLOATER
You can buy our new design PLASMA Floater (sold separately) and combine with the TV
Stand. So you can position your Flat Panel TV’S above the console and swivel left-or-right
for optium viewing control.
Option #3: L- SHAPE
YOU CAN BUY OUR PIER WALL (SOLD SEPARATELY) AND COMBINE WITH THE TV STAND.
SO YOU CAN USE WITH YOUR 60” DLP, LCD OR PLASMA TV’s.
Please call for replacement parts or assistance: 1-866-942-5362

Model # HT5206
VAS Furniture Mfg. Inc. Factory No. 72-14494 Page 7
Option #4: PIER WALL AND BRIDGE
YOU CAN BUY OUR PIER WALL AND BRIDGE (SOLD SEPARATELY) AND COMBINE WITH
THE TV STAND. SO YOU CAN USE WITH SOME DLP, LCD OR PLASMA TV’S.
Please call for replacement parts or assistance: 1-866-942-5362
TIPPING RESTRAINT HARDWARE
Note: We have included two Tipping Restraint Hardware bags for this Unit.
When properly installed, this restraint can provide protection against the unexpected tipping of the
Unit due to small tremors, bumps or climbing. We strongly recommend mounting this hardware to a
wall stud and your Unit.
Please carefully read the instructions printed on the bag.
Note: You must install the Tipping Restraint Hardware with the unit in use to prevent any accidents
or damage to the unit.
Tools Required: Allen Wrench (provided), Phillips Screwdriver, Mallet, Power Drill, and 3/8” Drill Bit.
Your assembly should now be complete.
Thank you for your purchase.