VAS HT5203 User manual

Model # HT5203
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
VAS Furniture Mfg. Inc. Factory No. 72-14494 Page 1
60" Audio Tower Brown Cherry Finish
ADULT ASSEMBLY REQUIRED
If you have any questions regarding assembly or if you are missing parts, do not return this item to
the Retailer Store. Please call our toll free customer service number and have your instructions
and parts list ready to provide the model name, part name or factory number:
1-866-942-5362 8:30 a.m. - 4:30 p.m. PST, Monday - Friday
ONLINE: www.whalenfurniture.com EMAIL: [e-mail]
Video Instruction Guides
Go to http://whalen.showuhow.com to view step-by-step instructional
videos for assembling and installing your product. Enter the following
product number on the ShowUhow homepage.
LOT No.:
DATE OF PURCHASE:
HT5203

Model # HT5203
Please call for replacement parts or assistance: 1-866-942-5362
VAS Furniture Mfg. Inc. Factory No. 72-14494 Page 2
QUALITY GUARANTEE
We are confident that you will be delighted with your VAS Furniture purchase.
Should this product be defective in workmanship or materials or fail under normal
use, we will repair or replace it for up to 1 year from date of purchase. Every VAS
Furniture product is designed to meet your highest expectations. We guarantee
that you will immediately see the value of our fine furniture.
This warranty gives you specific legal rights and you may also have other rights
which vary from State to State.
Customer Service: 1-866-942-5362
8:30 a.m. - 4:30 p.m. PST Monday to Friday
www.whalenfurniture.com
MANUFACTURER: VAS Furniture
CATALOG: 60" Audio Tower Brown Cherry Finish (HT5203)
DATE OF MANUFACTURE: September, 2009
MADE IN CHINA
MAXIMUM SHELF LOAD 30 LBS
This unit is intended for use only with the products and maximum
weights indicated. Use with other products or products heavier than the maximum
weights indicated may result in instability causing possible injury.

Model # HT5203
Please call for replacement parts or assistance: 1-866-942-5362
VAS Furniture Mfg. Inc. Factory No. 72-14494 Page 3
Parts & Hardware List
Please read completely through the instructions and verify that all parts listed are
present before beginning assembly.
A- Front Frame (1) B- Back Frame (1) C- Left Top Side Rail (1)
D- Left Bottom Side Rail (1) E- Right Top Side Rail (1) F- Right Bottom Rail (1)
G- Top Glass (1) H- Clear Glass Shelf (4) I- Bottom Glass Shelf (1)
(1) - 1 3/4” Bolt (8+1 extra) (2) - 5/8” Bolt (12+1 extra) (3)- Flat Washer (20+1 extra)
(4)- Glass Raiser (5)- Suction Cup (6)- Threaded Pin (7)- Suction Cup for Pin
(4) (4+1 extra) (16+1 extra) (16+1 extra)
(8)- Floor Leveler Allen Wrench Touch-Up Pen Tipping Restraint Hardware Kit (2)
(4) (1) (1) (Inside Plastic Bag)
Tools Required: Allen Wrench (provided).

Model # HT5203
Please call for replacement parts or assistance: 1-866-942-5362
VAS Furniture Mfg. Inc. Factory No. 72-14494 Page 4
Assembly Instructions
1. Unpack the unit and confirm that you have all the hardware and required parts listed.
2. Align and attach Top and Bottom Side Rails (C, D, E & F) to the Front Frame (A) in place, using the
5/8" Bolts (2) with Washers (3) through the bracket holes into the threaded inserts on the Front
Frame, three bolts per side rail. See detail #1.
3. Attach Back Frame (B) to the Top and Bottom Side Rails (C, D, E & F) using eight 1 3/4" Bolts (1)
with Washers (3) through the post holes. Make sure the threaded inserts on the Back Frame post
are facing front, as shown in detail #1 A.
4. Attach the Floor Leveler (8) to the bottom of Front and Back Frames (A & B) for necessary
adjustment, as shown in detail #1A.
5. Screw four Glass Raisers (4) on the top holes of the frames and completely insert four Suction Cups
(5) into the holes on Bottom Side Rails (D & F) as shown in detail #2.
6. Screw the Threaded Pins (6) into the threaded inserts on Front & Back Frame post, a total of sixteen.
Proceed to put the Suction Cup for Pin (7) on it, make sure they go all the way in and the suction
cups will fully support the glass shelf. See detail #2.

Model # HT5203
Please call for replacement parts or assistance: 1-866-942-5362
VAS Furniture Mfg. Inc. Factory No. 72-14494 Page 5
Assembly Instructions
7. Put the Bottom Glass Shelf (I) & Clear Glass Shelves (H) in place as shown in detail #3.
8. Now place Top Glass (G) onto the Glass Raisers installed, make sure it is center.
Note: Make sure the Glass sits securely on top of the suction cup.
Option #1: Audio and Display Tower
You can use this unit to place your Stereo Components or Photos.
Option #2: L- SHAPE
YOU CAN BUY OUR 60” OR 50” TV STAND (SOLD SEPARATELY) AND COMBINE WITH THE
PIER WALL SO YOU CAN USE WITH YOUR SOME DLP’s, LCD OR PLASMA TV’s.

Model # HT5203
Please call for replacement parts or assistance: 1-866-942-5362
VAS Furniture Mfg. Inc. Factory No. 72-14494 Page 6
Option #3: PIER WALL AND BRIDGE
YOU CAN BUY OUR TV CONSOLES AND BRIDGE (SOLD SEPARATELY) AND COMBINE
WITH THE PIER WALL. SO YOU CAN USE WITH SOME DLP, LCD OR PLASMA TV’S.
TIPPING RESTRAINT HARDWARE
Note: We have included two Tipping Restraint Hardware bags for this Unit.
When properly installed, this restraint can provide protection against the unexpected tipping of
the Unit due to small tremors, bumps or climbing. We strongly recommend mounting this
hardware to a wall stud and your Unit.
Please carefully read the instructions printed on the bag.
Note: You must install the Tipping Restraint Hardware with the unit in use to prevent any
accidents or damage to the unit.
Tools Required: Allen Wrench (provided), Phillips Screwdriver, Mallet, Power Drill, and 3/8” Drill Bit.
A Touch-Up Pen has been provided to repair any small nicks or scratches that may occur during
assembly or shipping.
Your assembly should now be complete.
Thank you for your purchase.

IF YOU REQUIRED TO ORDER PARTIS PLEASE USE THE LIST BELOW
60" Audio Tower Brown Cherry Finish (HT5203)
*HT5203-1-BF Back Frame *HT5203-12- TP Threaded Pin *HT5203-2-FF Front Frame *HT5203-13-GR Glass Raiser *HT5203-3-RTSR Right Top Side Rail *HT5203-14- FL Floor Leveler *HT5203-4-RBSR Right Bottom Side Rail *HT5203-15-FW Flat Washer *HT5203-5-LTSR Left Top Side Rail *HT5203-16-SCP Suction Cup for Pin *HT5203-6-LBSR Left Bottom Side Rail *HT5203-17- SC Suction Cup *HT5203-7-TG Top Glass *HT5203-18-AW Allen Wrench *HT5203-8-CGS Clear Glass Shelf *HT5203-19-TUP Touch Up Pen *HT5203-9-BGS Bottom Glass Shelf *HT5203-20-TRHK Tipping Restraint Hardware Kit *HT5203-10- 1 3/4AB 1 3/4" Allen Bolt *HT5203-21-CH Complete Hardware *HT5203-11- 5/8AB 5/8" Allen Bolt