Verco Apollo User manual

Apollo
Operating
Instructions
www.verco.co.uk
OFFICE FURNITURE LIMITED
Jan ‘07
care advice
Please regularly check that your chair’s components are complete and in
good working order and ensure that the chair is structurally sound and
functioning properly.
Plastic components should be wiped with a soft cloth soaked in mild
detergent and warm water. Rinse thoroughly and dry with a soft cloth.
In order to maintain the fabric over the five year guarantee period, the
upholstery must be cleaned and vacuumed on a regular basis.
Please visit www.verco.co.uk for further information.
Apollo Back Rake Action
Apollo Forward Tilt Action
Apollo Synchronised Action
Apollo 24 Hour Action
my chair
turn lever clockwise to release
action, lean backwards or forwards
to achieve desired position, turn
anti-clockwise to lock. for ‘dynamic
posture’ the chair may be left
unlocked in its ‘free float’ mode.
the action has a safety feature.
when the action is first unlocked,
lean against back to start the action.
24 hour action
to adjust the tension of the action,
turn lever clockwise to increase and
anti-clockwise to decrease tension.
tension control
place hand below the back, gradu-
ally lift to desired height. lift to top to
allow back to drop to start position.
back height
turn lever clockwise, use body
weight to slide seat into position,
turn lever anti-clockwise to lock.
seat depth
syncro action

back rake action forward tilt action
lift lever to release action, lean
backwards or forwards to achieve
desired position, release lever to
lock.
back angle
lift lever and use body weight to
raise or lower the seat to desired
position, release lever to lock.
seat height
lift button under arm rest and raise
or lower arm rest to the desired
height. release button to lock.
arm height
lift lever to release seat, use body
weight to slide seat to desired
position, release lever to lock.
seat depth
push button at the base of the back
rest and raise back to desired
height. release button to lock.
back height
to adjust the tension of the action,
turn knob clockwise to increase and
anti-clockwise to decrease tension.
tension control
push lever down to release action,
lean backwards or forwards to
achieve desired position, lift lever up
to lock. for ‘dynamic posture’ the
chair may be left unlocked in its ‘free
float’ mode.
the action has a safety feature.
when the action is first unlocked,
lean against back to start the action.
syncro action
synchronised action
push lever down to activate the seat
tilt. use body weight to adjust, lift
lever to lock the seat in the desired
position.
forward tilt
pull lever down to release action,
lean backwards or forwards to
achieve desired position, lift lever up
to lock. for ‘dynamic posture’ the
chair may be left unlocked in its ‘free
float’ mode.
the action has a safety feature.
when the action is first unlocked,
lean against back to start the action.
back angle
carefully insert the adaptor into the valve located at the base of the back.
pump balloon until desired support is achieved. carefully remove adaptor
once lumbar support is correct, safely store for future use.
inflatable lumbar

Apollo
Operating
Instructions
www.verco.co.uk
OFFICE FURNITURE LIMITED
Jan ‘07
care advice
Please regularly check that your chair’s components are complete and in
good working order and ensure that the chair is structurally sound and
functioning properly.
Plastic components should be wiped with a soft cloth soaked in mild
detergent and warm water. Rinse thoroughly and dry with a soft cloth.
In order to maintain the fabric over the five year guarantee period, the
upholstery must be cleaned and vacuumed on a regular basis.
Please visit www.verco.co.uk for further information.
Apollo Back Rake Action
Apollo Forward Tilt Action
Apollo Synchronised Action
Apollo 24 Hour Action
my chair
turn lever clockwise to release
action, lean backwards or forwards
to achieve desired position, turn
anti-clockwise to lock. for ‘dynamic
posture’ the chair may be left
unlocked in its ‘free float’ mode.
the action has a safety feature.
when the action is first unlocked,
lean against back to start the action.
24 hour action
to adjust the tension of the action,
turn lever clockwise to increase and
anti-clockwise to decrease tension.
tension control
place hand below the back, gradu-
ally lift to desired height. lift to top to
allow back to drop to start position.
back height
turn lever clockwise, use body
weight to slide seat into position,
turn lever anti-clockwise to lock.
seat depth
syncro action