Verco Maya User manual

Maya
Operating
Instructions
www.verco.co.uk
OFFICE FURNITURE LIMITED
care advice
Please regularly check that your chair’s components are complete and in
good working order and ensure that the chair is structurally sound and
functioning properly.
Plastic components should be wiped with a soft cloth soaked in mild
detergent and warm water. Rinse thoroughly and dry with a soft cloth.
In order to maintain the fabric over the five year guarantee period, the
upholstery must be cleaned and vacuumed on a regular basis.
Please visit www.verco.co.uk for further information.
Jan ‘07
my chair
Maya Back Rake Action
Maya Forward Tilt Action
Maya Synchronised Action
my chair

back angle
back rake action independent seat and back action
turn lever anti-clockwise to release action, lean backwards or forwards to
achieve desired position, turn lever clockwise to lock.
lift lever and use body weight to
raise or lower the seat to desired
position, release lever to lock.
seat height
lift button under arm rest and raise
or lower arm rest to the desired
height. release button to lock.
arm height
lift lever to release seat, use body
weight to slide seat to desired
position, release lever to lock.
seat depth
place hand below the back, gradu-
ally lift to desired height. lift to top to
allow back to drop to start position.
back height
to decrease the tension of action,
pull handle out and turn clockwise.
turning anti-clockwise increases
tension.
tension control
lift lever to release action, lean
backwards or forwards to achieve
desired position, push lever down to
lock. for ‘dynamic posture’ the chair
may be left unlocked in its ‘free float’
mode.
the action has a safety feature.
when the action is first unlocked,
lean against back to start the action.
syncro action
synchronised action
lift lever to activate the seat tilt. use
body weight to adjust, release lever
to lock the seat in the desired
position.
seat tilt
lift lever to release action, lean
backwards or forwards to achieve
desired position, push lever down to
lock. for ‘dynamic posture’ the chair
may be left unlocked in its ‘free float’
mode.
the action has a safety feature.
when the action is first unlocked,
lean against back to start the
action..
back angle

Maya
Operating
Instructions
www.verco.co.uk
OFFICE FURNITURE LIMITED
care advice
Please regularly check that your chair’s components are complete and in
good working order and ensure that the chair is structurally sound and
functioning properly.
Plastic components should be wiped with a soft cloth soaked in mild
detergent and warm water. Rinse thoroughly and dry with a soft cloth.
In order to maintain the fabric over the five year guarantee period, the
upholstery must be cleaned and vacuumed on a regular basis.
Please visit www.verco.co.uk for further information.
Jan ‘07
my chair
Maya Back Rake Action
Maya Forward Tilt Action
Maya Synchronised Action
my chair