Verco Profile User manual

Profile
Operating
Instructions
www.verco.co.uk
OFFICE FURNITURE LIMITED
Jan ‘07
care advice
Please regularly check that your chair’s components are complete and in
good working order and ensure that the chair is structurally sound and
functioning properly.
Plastic components should be wiped with a soft cloth soaked in mild
detergent and warm water. Rinse thoroughly and dry with a soft cloth.
In order to maintain the fabric over the five year guarantee period, the
upholstery must be cleaned and vacuumed on a regular basis.
Please visit www.verco.co.uk for further information.
Profile Synchronised Action
Profile ISB Action

independent seat and back action synchronised action
lift lever to release action, lean
backwards or forwards to
achieve desired position, push
lever down to lock. for
‘dynamic posture’ the chair
may be left unlocked in its
‘free float’ mode.
the action has a safety
feature. when the action is first
unlocked, lean against back to
start the action.
back angle
lift lever and use body weight
to raise or lower the seat to
desired position, release lever
to lock.
seat height
carefully insert the adaptor
into the valve located at the
base of the back.
pump balloon until desired
support is acheived.
carefully remove adaptor once
lumbar support is correct,
safely store for future use.
inflatable lumbar
lift button under arm rest and
raise or lower arm rest to the
desired height. release button
to lock.
arm height
lift lever to release seat, use
body weight to slide seat to
desired position, release lever
to lock.
seat depth
place hand below the back,
gradually lift to desired height.
lift to top to allow back to drop
to start position.
back height
to decrease the tension of
action, pull handle out and
turn clockwise. turning anti-
clockwise increases tension.
tension control
lift lever to release action, lean
backwards or forwards to
achieve desired position, push
lever down to lock.
for ‘dynamic posture’ the chair
may be left unlocked in its
‘free float’ mode.
the action has a safety
feature.when the action is first
unlocked, lean against back to
start the action.
syncro action
lift lever to activate the seat
tilt. use body weight to adjust,
release lever to lock the seat
in the desired position.
seat tilt

Profile
Operating
Instructions
www.verco.co.uk
OFFICE FURNITURE LIMITED
Jan ‘07
care advice
Please regularly check that your chair’s components are complete and in
good working order and ensure that the chair is structurally sound and
functioning properly.
Plastic components should be wiped with a soft cloth soaked in mild
detergent and warm water. Rinse thoroughly and dry with a soft cloth.
In order to maintain the fabric over the five year guarantee period, the
upholstery must be cleaned and vacuumed on a regular basis.
Please visit www.verco.co.uk for further information.
Profile Synchronised Action
Profile ISB Action