Verco Spyne User manual

Spyne
Operating
Instructions

arm height
lift button under arm rest and raise or
lower arm rest to the desired height.
release button to lock.
syncro action
lift lever to release action, lean
backwards or forwards to achieve
desired position, push lever down to
lock. for ‘dynamic posture’ the chair
may be left unlocked in its ‘free float’
mode.
the action has a safety feature.when
the action is first unlocked, lean
against back to start the action.
back height
place hand below the back, gradually
lift to desired height. lift to top to allow
back to drop to start position.
seat depth
lift lever to release seat, use body
weight to slide seat to desired
position, release lever to lock.
seat height
lift lever and use body weight to raise
or lower the seat to desired position,
release lever to lock.
tension control
to decrease the tension of action,
pull handle out and turn clockwise.
turning anti-clockwise increases
tension.

www.verco.co.uk
OFFICE FURNITURE LIMITED
care advice
Please regularly check that your chair’s components are complete and in
good working order and ensure that the chair is structurally sound and
functioning properly.
Plastic components should be wiped with a soft cloth soaked in mild
detergent and warm water. Rinse thoroughly and dry with a soft cloth.
In order to maintain the fabric over the five year guarantee period, the
upholstery must be cleaned and vacuumed on a regular basis.
Please visit www.verco.co.uk for further information.
Jan ‘07