Verco Buzz User manual

10.2012
buzz
www.verco.co.uk
OFFICE FURNITURE LIMITED
care advice
Please regularly check that your chair’s components are complete and in good
working order and ensure that the chair is structurally sound and functioning
properly.
Plastic components should be wiped with a soft cloth soaked in mild detergent
and warm water. Rinse thoroughly and dry with a soft cloth.
In order to maintain the fabric over the five year guarantee period, the
upholstery must be cleaned and vacuumed on a regular basis.
Please visit www.verco.co.uk for further information.
operating
instructions
back rake (br)
independent seat and back (isb)
synchronised seat and back (syn)

back rake action isb action synchronised action
Please note: Depending on the specification of your chair, it may not have all of the featured options above. Please see overleaf for the action on your chair.
To increase tension, turn
wheel clockwise. Turn
wheel anti-clockwise to
decrease tension.
tension control
Lift button on outside of arm and raise or lower arm to
desired height, release button to lock.
arm height
back angle
Lift lever to release action,
lean backwards or forwards
to achieve desired position,
push lever down to lock.
synchro action
Lift lever to release action,
lean backwards or forwards
to achieve desired position,
push lever down to lock.
For ‘dynamic posture’ the
chair may be left unlocked
in its ‘free float’ mode.
The action has a safety
feature. When the action is
first unlocked, lean against
back to start the action.
Lift lever to release seat, use body weight to slide seat
to desired position, release lever to lock.
seat depth
Lift lever and use body weight to raise or lower seat to
desired position, release lever to lock.
seat height
back height
Turn wheel anti-clockwise
to release. Raise or lower
back to desired height.
Turn clockwise to lock.
back angle
Lift lever to release action,
lean backwards or forwards
to achieve desired position,
push lever down to lock.
back height
Turn wheel anti-clockwise
to release. Raise or lower
back to desired height.
Turn clockwise to lock.
back height
Place hand below back,
gradually lift to desired
height. Lift to top to allow
to drop to start position.
seat angle
Lift lever to activate seat
tilt. Use body weight to
adjust, release lever to lock
seat in desired position.

10.2012
buzz
www.verco.co.uk
OFFICE FURNITURE LIMITED
care advice
Please regularly check that your chair’s components are complete and in good
working order and ensure that the chair is structurally sound and functioning
properly.
Plastic components should be wiped with a soft cloth soaked in mild detergent
and warm water. Rinse thoroughly and dry with a soft cloth.
In order to maintain the fabric over the five year guarantee period, the
upholstery must be cleaned and vacuumed on a regular basis.
Please visit www.verco.co.uk for further information.
operating
instructions
back rake (br)
independent seat and back (isb)
synchronised seat and back (syn)