Verco Breathe User manual

Breathe
Operating
Instructions

seat depth
to increase the tension of action turn
handle clockwise. turning anti
clockwise decreases tension.
push lever down to release, slide arm
to desired position, pull lever up to
lock.
push button and raise or lower arm
rest to the desired height. release
button to lock.
lift lever and use body weight to raise
or lower the seat to desired position,
release lever to lock.
push button to release seat, use body
weight to slide seat to desired
position, release button to lock.
task/managerial
this lever has three positions:
middle position - push lever to middle position to release action, lean backwards or forwards to achieve desired position.
bottom position - push lever to bottom position to allow seat to tilt forward by an additional 3° from horizontal.
top position - lift lever up to the top position to lock.
for ‘dynamic posture’ the chair may be left unlocked in its ‘free float’ mode.
the action has a safety feature; when first unlocked, lean against back to start the action.
arm width arm height
tension control
seat height
syncro action

www.verco.co.uk
OFFICE FURNITURE LIMITED
care advice
Please regularly check that your chair’s components are complete and in
good working order and ensure that the chair is structurally sound and
functioning properly.
Plastic components should be wiped with a soft cloth soaked in mild
detergent and warm water. Rinse thoroughly and dry with a soft cloth.
In order to maintain the fabric over the five year guarantee period, the
upholstery must be cleaned and vacuumed on a regular basis.
Please visit www.verco.co.uk for further information.
Jan ‘10