Vertiv NetSure 801DB NVGB User guide

SAG582120600
System Application Guide
Spec. No. 582120600 (Model 801DB NVGB)
Revision BK, September 27, 2017
Page 1 of 75
SYSTEM OVERVIEW
Description:
The NetSure™ 801DB NVGB DC Power Distribution is a -48V Battery Distribution Fuse / Circuit Breaker Bay
(BDF/CBB).
•The NetSure™ 801DB NVGB can be ordered as an 8-distribution panel or 6-distribution panel bay (4 or
3 panels per side).
•Each distribution panel can be configured for separate inputs giving you an 8-load or 6-load bay (must
use an external ground/return bar), or the panels per side can be paralleled to allow one feed per side
giving you a 2-load bay (may use the optional internal ground/return bar). Other configurations
include an 8-panel bay with 4-loads and two loads, and a 6-panel bay with 4-loads (paralleling the top
two panels
or
paralleling the bottom two panels per side).
•Each bay can be equipped with an optional “full bay length” internal ground/return bar (per side)
(configuration restrictions apply). Another option includes replacing one (8- and 6-panel bays) or two
(8-panel bay only) distribution panels per side with a “panel length” internal ground/return bar.
•Each bay can easily be configurable for top or bottom feed.
•Each bay is equipped with a digital meter assembly. The List 105 and 107 bays provide a basic digital
meter, which is capable of displaying system load voltage and current on each Distribution Panel. An
advanced Digital Meter/Alarm Panel is provided in the List 106 and 108 bays. In addition to the basic
metering functions, this panel provides Low Voltage, Power Lost, Over-current and Fuse/Circuit
Breaker alarms for each panel in the bay. Also provided are four (4) external alarm relay circuits, to
which any combination of alarms can be mapped. This Meter Panel comes with a comprehensive Web
page capability for remote system management.
General Specifications
See detailed specifications on page 66.
Family: NetSure™
Spec. No.: 582120600
Model: 801DB NVGB
Output Voltage: -48 Volts DC
Output Capacity: 640A continuous per Distribution Panel
8-Panel Bay; 2400A Maximum per Side, 4800A Maximum per Bay
6-Panel Bay; 1800A Maximum per Side, 3600A Maximum per Bay
Agency Approval: UL Listed ("cULus"), NEBS
Framework Type: Seismic Rated (Zone 4) Box Framework
6-Panel Sizes: 84”H x 26“W x 16“D
84”H x 30“W x 24“D
8-Panel Sizes: 84”H x 26“W x 16“D
84”H x 30“W x 24“D
Access: Front and Rear for Installation, Front for Operation and Maintenance
Color: Textured Gray (M500-147)
Environment: 0°C to +40°C (+32°F to +104°F)
Home

SAG582120600 System Application Guide
Revision BK, September 27, 2017 Spec. No. 582120600 (Model 801DB NVGB)
Page 2 of 75
Home

System Application Guide SAG582120600
Spec. No. 582120600 (Model 801DB NVGB) Revision BK, September 27, 2017
Page 3 of 75
TABLE OF CONTENTS
SYSTEM OVERVIEW............................................................................................................................................................................................................. 1
MAIN COMPONENTS ILLUSTRATIONS..........................................................................................................................................................................5
Eight Panel Bay ...............................................................................................................................................................................................................5
Six Panel Bay....................................................................................................................................................................................................................7
LIST DESCRIPTIONS ............................................................................................................................................................................................................9
List Numbers....................................................................................................................................................................................................................9
List 106: Common Equipment, 6-Panel Bay, w/ Advanced Metering..............................................................................................................................9
List 206: Common Equipment, 6-Panel Bay, w/ Advanced Metering ...........................................................................................................................10
List 108: Common Equipment, 8-Panel Bay, w/ Advanced Metering .............................................................................................................................11
List 208: Common Equipment, 8-Panel Bay, w/ Advanced Metering ...........................................................................................................................12
List 110: Distribution Panel, 8-Panel Bay..........................................................................................................................................................................................13
List 115: Distribution Panel, 8-Panel Bay ..........................................................................................................................................................................................13
List 116: Optional Internal Ground/Return Bar, 8-Panel Bay (Full Bay Length) ......................................................................................................14
List 117: Optional Internal Ground/Return Bar, 8-Panel Bay (Panel Length)............................................................................................................14
List 118: Blank Distribution Panel Cover, 8-Panel Bay.............................................................................................................................................................15
List 120: Distribution Panel, 6-Panel Bay.........................................................................................................................................................................................15
List 125: Distribution Panel, 6-Panel Bay .........................................................................................................................................................................................16
List 126: Optional Internal Ground/Return Bar, 6-Panel Bay (Full Bay Length) .....................................................................................................16
List 127: Optional Internal Ground/Return Bar, 6-Panel Bay (Panel Length) ...........................................................................................................17
List 128: Blank Distributional Panel Cover, 6-Panel Bay ........................................................................................................................................................17
List 130: Distribution Panel Paralleling Bar ....................................................................................................................................................................................17
List 139: Optional Internal Ground/Return Bar Paralleling Kit, 8-Panel Bay (Panel Length)..........................................................................18
List 143: Bay Input Feed and Shunt Assembly (4 Cables, 25 mV. Shunts) ................................................................................................................18
List 144: Bay Input Feed and Shunt Assembly (2 Cables, 25 mV. Shunts) ................................................................................................................18
List 145: Bay Input Feed and Shunt Assembly (2 Cables, 50 mV. Shunts) ................................................................................................................19
List 147: Bay Input Feed and Shunt Assembly (4 Cables, 50 mV. Shunts)................................................................................................................19
List 148: 2400A Ground/Return Input Assembly, with Optional Bonding Strap...................................................................................................20
List 150: Optional Capacitor Precharge Assembly...................................................................................................................................................................20
List 151: Dressing Bar....................................................................................................................................................................................................................................21
List 251: Dressing Bar...................................................................................................................................................................................................................................21
List 153: Load Distribution Cable Management Kit...................................................................................................................................................................21
List 253: Load Distribution Cable Management Kit.................................................................................................................................................................22
List 166: Meter Panel Field Upgrade Retrofit Kit.......................................................................................................................................................................22
List 167: Pre-Installed Load Lug-Mounting Hardware ...........................................................................................................................................................22
List 168: Meter Panel Field Upgrade Retrofit Kit.......................................................................................................................................................................23
List 170: Assembly, Ethernet ..................................................................................................................................................................................................................23
For Manufactured Discontinued Bays (Model 1293V3) ..................................................................................................................................... 24
ACCESSORY DESCRIPTIONS ......................................................................................................................................................................................... 26
Load Lug Hardware Kits ............................................................................................................................................................................................ 26
Side by Side Busbar Link Kit for Use with List 110 and List 120, P/N 556103.............................................................................................. 26
Side by Side Busbar Link Kit for Use with List 115 and List 125, P/N 557256 .............................................................................................. 26
Right Angle Lug Adaptor Kits, P/Ns 556377 and 556378 ................................................................................................................................. 28
External Return/Ground Bar Assemblies .............................................................................................................................................................. 29
Seismic Anchor Kit, P/N 545387 ..............................................................................................................................................................................30
Transient Voltage Surge Suppressor (TVSS) Device ........................................................................................................................................30
Distribution Devices and Lug Selection..................................................................................................................................................................31
TLS/TPS Fuses/Fuseblocks, TPL Fuses/Fuseblocks, and Lug Selection for Lists 110 and 120....................................................................31
Bullet Nose-Type Circuit Breakers, Bullet Nose-Type Fuseblocks e/w TLS/TPS Fuses, and Lug Selection for Lists
115 and 125...........................................................................................................................................................................................................................................................35
Box Framework Extensions........................................................................................................................................................................................41
One (1) Foot Box Framework Extension............................................................................................................................................................................................41
Two (2) Foot Box Framework Extension...........................................................................................................................................................................................41
Four and One-Half (4-1/2) Foot Box Framework Extension.................................................................................................................................................41
Wiring Notes .................................................................................................................................................................................................................42
Bay Frame Grounding Wire Sizes and Lugs Selection............................................................................................................................................................42
External Alarm Wiring—List 105 and 107 Bays............................................................................................................................................................................42

SAG582120600 System Application Guide
Revision BK, September 27, 2017 Spec. No. 582120600 (Model 801DB NVGB)
Page 4 of 75
External Alarm and Control Wiring—List 106, 206, 108 and 208 Bays.........................................................................................................................42
Load Distribution Wire Sizes Selection.............................................................................................................................................................................................43
DC Input Cable Sizes and Lugs Selection.......................................................................................................................................................................................47
Wiring Illustrations ......................................................................................................................................................................................................48
Overall Installer’s Connections...............................................................................................................................................................................................................48
Bay Frame Grounding Connection ......................................................................................................................................................................................................49
External Alarm and Meter/Alarm Card Input Connections..................................................................................................................................................50
Load Distribution Connections—Lists 106, 108, 206, 208....................................................................................................................................................55
DC Input Connections...................................................................................................................................................................................................................................61
Replacement Alarm, Reference, and Control Fuses, List 105 and 107 Bays .................................................................................................64
Fuseblock Located in Bay’s Top Center ..........................................................................................................................................................................................64
Replacement Alarm, Reference, and Control Fuses, List 106 and 108 Bays.................................................................................................64
Fuses Located on Auxiliary Fuse Card at Top of Bay .............................................................................................................................................................64
Replacement Circuit Cards, List 105 and 107 Bays............................................................................................................................................. 65
Replacement Circuit Cards, List 106, 108, 206, and 208 Bays ......................................................................................................................... 65
SPECIFICATIONS................................................................................................................................................................................................................66
1.1 DC Operating Voltage ..........................................................................................................................................................................................66
1.2 Environmental Ratings.........................................................................................................................................................................................66
1.3 Compliance Information.......................................................................................................................................................................................66
1.4 Output Ratings.......................................................................................................................................................................................................66
1.5 Standard Features—Lists 106 and 108............................................................................................................................................................66
MECHANICAL SPECIFICATIONS (LIST 106 AND 108) ............................................................................................................................................68
Floor Hole Drilling Pattern Dimensions..................................................................................................................................................................68
MECHANICAL SPECIFICATIONS (LIST 206 AND 208) ...........................................................................................................................................69
Floor Hole Drilling Pattern Dimensions..................................................................................................................................................................69
Dimensions, List 108: 8-Bus Bay .............................................................................................................................................................................. 70
Dimensions, List 208: 8-Bus Bay...............................................................................................................................................................................71
Dimensions, List 106: 6-Bus Bay .............................................................................................................................................................................. 72
Dimensions, List 206: 6-Bus Bay ............................................................................................................................................................................. 73
RELATED DOCUMENTATION........................................................................................................................................................................................ 74
REVISION RECORD ............................................................................................................................................................................................................ 75

System Application Guide SAG582120600
Spec. No. 582120600 (Model 801DB NVGB) Revision BK, September 27, 2017
Page 5 of 75
MAIN COMPONENTS ILLUSTRATIONS
Eight Panel Bay
Front View
Eight Panel Bay
Digital Meter Assembly
P/O List 108 or 208 (shown)
Distribution Panel (B)
(List 110 or 115) or
Blank Panel (List 118)
Box Framework Extension (1’,
2’, or 4.5’)
Distribution Panel (G)
(List 110 or 115) or
Blank Panel (List 118)
Distribution Panel (H)
(List 110 or 115) or
Blank Panel (List 118)
Distribution Panel (A)
(List 110 or 115) or
Blank Panel (List 118)
Paralleling Bar
(List 130)
Paralleling Bar
(List 130)
Paralleling Bar
(List 130)
Paralleling Bar
(List 130)
Distribution Panel (C)
(List 110 or 115) or
Blank Panel (List 118)
Distribution Panel (D)
(List 110 or 115) or
Blank Panel (List 118)
Distribution Panel (E)
(List 110 or 115) or
Blank Panel (List 118)
Distribution Panel (F)
(List 110 or 115) or
Blank Panel (List 118)
Paralleling Bar
(List 130)
Paralleling Bar
(List 130)
List 108 or 208 (Common Equipment)
List 116 (Optional Internal ‘Full Bay
Length’ Ground/Return Bar)
List 143, 144, 145, 147 (Bay Input Feed
and Shunt Assembly)
Home

SAG582120600 System Application Guide
Revision BK, September 27, 2017 Spec. No. 582120600 (Model 801DB NVGB)
Page 6 of 75
Eight Panel Bay (cont’d)
OTHER OPTIONS
List 117 (Optional Internal
‘Panel Length’ Ground/Return Bar)
List 139 (Optional Internal ‘Panel Length’
Ground/Return Bar Paralleling Kit)
List 148 (2400A Ground/Return Input Assembly,
with Optional Bonding Strap for List 116
Ground/Return Bar)
List 150 (Optional Capacitor
Precharge Assembly)
List 151 (Dressing Bar)
List 153 (Load Distribution
Cable Management Kit)
List 156 (Meter and Alarm Card
Internal Power In-Line Fuse Kit, for List 105 bay)
List 167 (Pre-Installed Load Lug Hardware)
List 168 (Field Installable Advanced Meter Panel for
older 8-Panel BDFBs)
Home

System Application Guide SAG582120600
Spec. No. 582120600 (Model 801DB NVGB) Revision BK, September 27, 2017
Page 7 of 75
Six Panel Bay
Front View
Six Panel Bay
Digital Meter Assembly
P/O List 106 (shown) or 206
Distribution Panel (B)
(List 120 or 125) or
Blank Panel (List 128)
Box Framework Extension (1’,
2’, or 4.5’)
Distribution Panel (D)
(List 120 or 125) or
Blank Panel (List 128)
Distribution Panel (E)
(List 120 or 125) or
Blank Panel (List 128)
Distribution Panel (F)
(List 120 or 125) or
Blank Panel (List 128)
Distribution Panel (C)
(List 120 or 125) or
Blank Panel (List 128)
Distribution Panel (A)
(List 120 or 125) or
Blank Panel (List 128)
Paralleling Bar
(List 130)
Paralleling Bar
(List 130)
Paralleling Bar
(List 130)
Paralleling Bar
(List 130)
List 106 or 206 (Common Equipment)
List 126 (Optional Internal ‘Full Bay
Length’ Ground/Return Bar)
List 143, 144, 145, 147 (Bay Input Feed
and Shunt Assembly)
Home

SAG582120600 System Application Guide
Revision BK, September 27, 2017 Spec. No. 582120600 (Model 801DB NVGB)
Page 8 of 75
Six Panel Bay (cont’d)
OTHER OPTIONS
List 127 (Optional Internal
‘Panel Length’ Ground/Return Bar)
List 148 (2400A Ground/Return Input Assembly,
with Optional Bonding Strap for List 126
Ground/Return Bar)
List 150 (Optional Capacitor
Precharge Assembly)
List 151 (Dressing Bar)
List 153 (Load Distribution
Cable Management Kit)
List 156 (Meter and Alarm Card
Internal Power In-Line Fuse Kit, for List 107 bay)
List 167 (Pre-Installed Load Lug Hardware)
List 166 (Field Installable Advanced Meter Panel for
older 6-Panel BDFBs)
Home

System Application Guide SAG582120600
Spec. No. 582120600 (Model 801DB NVGB) Revision BK, September 27, 2017
Page 9 of 75
LIST DESCRIPTIONS
List Numbers
List 106: Common Equipment, 6-Panel Bay, w/ Advanced Metering
Features
♦List 106 provides the common equipment for a 6-Distribution Panel BDF/CBB (Battery Distribution Fuse/Circuit Breaker
Bay) with advanced metering.
♦Configurable for top or bottom feed.
♦Consists of a 7’H x 26”W x 15”D welded box framework (seismic, zone 4 earthquake compliant).
♦Includes an Advanced Meter/Alarm Panel that provides the following functions for each panel in the bay: voltage and
current metering and Low Voltage, Power Lost, Overcurrent, and Fuse/Circuit Breaker alarms. Also provided are four (4)
external alarm relay circuits, to which any combination of alarms can be mapped.
♦Provides four (4) fused auxiliary -48V power outputs (1-1/3A), fused remote (A/B) meter panel inputs, internal/external
sense option, and an Ethernet connection (requires List 170 Ethernet option).
Restrictions
None.
Ordering Notes
1) Order up to six (6) Lists 120 and/or List 125 Distribution Panels per bay.
2) If List 120 is ordered, order a List 150 Capacitor Precharge Assembly, if required.
3) For any open Distribution Panel position, order a List 128 Blank Panel.
4) Order List 143 or 144 Input Feed and Shunt Assembly as required. Each List 143 or 144 provides input terminations and
shunts for both sides.
For top and bottom feed 2-load applications, order one (1) List 143 or 144 and specify top or bottom feed.
For top and bottom feed multi-load applications, order three (3) List 143 or 144 for each Side A/Side B load and specify
top or bottom feed.
List 120 Only: For 3-load side by side applications, order three (3) List 143 or 144, and order three (3) 556103.
List 125 Only: For 3-load side by side applications, order three (3) List 143 or 144, and order three (3) 557256.
5) If Distribution Panels (per side) are to be paralleled, order a List 130 Distribution Panel Paralleling Bar. Each List 130
includes two (2) Paralleling Bars (one per side).
6) Order List 126 or List 127 Internal Ground Bars as required, or External Ground Bars (see ACCESSORY DESCRIPTIONS
section) as required.
7) List 126 provides input lug landing points at the top or bottom (as specified) of the full bay length ground/return busbars.
List 126 internal return bars are rated for 1200 Amps. List 148 is available to increase that capacity to 2400 Amps and
provide additional cable landing points. Each bay can accommodate (1) List 148. List 148 offers cable termination at the
rear of the bay and the option of a bonding strap.
8) Order List 151 Cable Dressing Bars as required.
9) Order a 1’, 2’, or 4-1/2’ Box Framework Extension as required.
10) Order distribution fuses, circuit breakers, and load lugs as required per Distribution Devices and Lug Selection in
ACCESSORY DESCRIPTIONS.
11) For Load and Load Return lug-mounting hardware, order Load Lug Hardware Kits (ship-loose) as required, or order List
167 (pre-installed).
12) Order TVSS Device(s) as required per Transient Voltage Surge Suppressor (TVSS) Device in ACCESSORY
DESCRIPTIONS.
13) Order DC input lugs as required per DC Input Cable Sizes and Lugs Selection under Wiring Notes in ACCESSORY
DESCRIPTIONS.
14) Order bay frame grounding lugs as required per Bay Frame Grounding Wire Sizes and Lugs Selection under Wiring Notes
in ACCESSORY DESCRIPTIONS.
15) For remote access capability, order one (1) List 170 Ethernet option.
Home

SAG582120600 System Application Guide
Revision BK, September 27, 2017 Spec. No. 582120600 (Model 801DB NVGB)
Page 10 of 75
List 206: Common Equipment, 6-Panel Bay, w/ Advanced Metering
Features
♦List 206 provides the common equipment for a 6-Distribution Panel BDF/CBB (Battery Distribution Fuse/Circuit Breaker
Bay) with advanced metering.
♦Configurable for top or bottom feed.
♦Consists of a 84”H x 30”W x 24”D welded box framework (seismic, zone 4 earthquake compliant).
♦Includes an Advanced Meter/Alarm Panel that provides the following functions for each panel in the bay: voltage and
current metering and Low Voltage, Power Lost, Overcurrent, and Fuse/Circuit Breaker alarms. Also provided are four (4)
external alarm relay circuits, to which any combination of alarms can be mapped.
♦Provides four (4) fused auxiliary -48V power outputs (1-1/3A), fused remote (A/B) meter panel inputs, internal/external
sense option, and an Ethernet connection (requires List 170 Ethernet option).
Restrictions
None.
Ordering Notes
1) Order up to six (6) Lists 120 and/or List 125 Distribution Panels per bay.
2) If List 120 is ordered, order a List 150 Capacitor Precharge Assembly, if required.
3) For any open Distribution Panel position, order a List 128 Blank Panel.
4) Order List 143 or 144 Input Feed and Shunt Assembly as required. Each List 143 or 144 provides input terminations and
shunts for both sides.
For top and bottom feed 2-load applications, order one (1) List 143 or 144 and specify top or bottom feed.
For top and bottom feed multi-load applications, order three (3) List 143 or 144 for each Side A/Side B load and specify
top or bottom feed.
List 120 Only: For 3-load side by side applications, order three (3) List 143 or 144, and order three (3) 556103.
List 125 Only: For 3-load side by side applications, order three (3) List 143 or 144, and order three (3) 557256.
5) If Distribution Panels (per side) are to be paralleled, order a List 130 Distribution Panel Paralleling Bar. Each List 130
includes two (2) Paralleling Bars (one per side).
6) Order List 126 or List 127 Internal Ground Bars as required, or External Ground Bars (see ACCESSORY DESCRIPTIONS
section) as required.
7) List 126 provides input lug landing points at the top or bottom (as specified) of the full bay length ground/return busbars.
List 126 internal return bars are rated for 1200 Amps. List 148 is available to increase that capacity to 2400 Amps and
provide additional cable landing points. Each bay can accommodate (1) List 148. List 148 offers cable termination at the
rear of the bay and the option of a bonding strap.
8) Order List 251 Cable Dressing Bars as required.
9) Order distribution fuses, circuit breakers, and load lugs as required per Distribution Devices and Lug Selection in
ACCESSORY DESCRIPTIONS.
10) For Load and Load Return lug-mounting hardware, order Load Lug Hardware Kits (ship-loose) as required, or order List
167 (pre-installed).
11) Order TVSS Device(s) as required per Transient Voltage Surge Suppressor (TVSS) Device in ACCESSORY
DESCRIPTIONS.
12) Order DC input lugs as required per DC Input Cable Sizes and Lugs Selection under Wiring Notes in ACCESSORY
DESCRIPTIONS.
13) Order bay frame grounding lugs as required per Bay Frame Grounding Wire Sizes and Lugs Selection under Wiring Notes
in ACCESSORY DESCRIPTIONS.
14) For remote access capability, order one (1) List 170 Ethernet option.
Home

System Application Guide SAG582120600
Spec. No. 582120600 (Model 801DB NVGB) Revision BK, September 27, 2017
Page 11 of 75
List 108: Common Equipment, 8-Panel Bay, w/ Advanced Metering
Features
♦List 108 provides the common equipment for an 8-Distribution Panel BDF/CBB (Battery Distribution Fuse/Circuit Breaker
Bay) with advanced metering.
♦Configurable for top or bottom feed.
♦Consists of a 84”H x 26”W x 15”D welded box framework (seismic, zone 4 earthquake compliant).
♦Includes an Advanced Meter/Alarm Panel that provides the following functions for each panel in the bay: voltage and
current metering and Low Voltage, Power Lost, Overcurrent, and Fuse/Circuit Breaker alarms. Also provided are four (4)
external alarm relay circuits, to which any combination of alarms can be mapped.
♦Provides four (4) fused auxiliary -48V power outputs (1-1/3A), fused remote (A/B) meter panel inputs, internal/external
sense option, and an Ethernet connection (requires List 170 Ethernet option).
Restrictions
None.
Ordering Notes
1) Order up to eight (8) Lists 110 and/or List 115 Distribution Panels per bay.
2) If List 110 is ordered, order a List 150 Capacitor Precharge Assembly, if required.
3) For any open Distribution Panel position, order a List 118 Blank Panel.
4) Order List 143 or 144 Input Feed and Shunt Assembly as required. See Restrictions above. Each List 143 or 144 provides
input terminations and shunts for both sides.
For top and bottom feed 2-load applications, order one (1) List 143 or 144 and specify top or bottom feed.
For top and bottom feed multi-load applications, order two (2) or four (4) List 143 or 144 for each Side A/Side B load and
specify top or bottom feed. Order List 130 as required.
List 110 Only: For 4-load side by side applications, order four (4) List 143 or 144, and order four (4) 556103. For top and
bottom feed 2-load side by side applications, order two (2) List 143 or 144, two (2) 556103, and two (2) List 130.
List 115 Only: For 4-load side by side applications, order four (4) List 143 or 144, and order four (4) 557256. For top and
bottom feed 2-load side by side applications, order two (2) List 143 or 144, two (2) 557256, and two (2) List 130.
5) If Distribution Panels (per side) are to be paralleled, order a List 130 Distribution Panel Paralleling Bar. Each List 130
includes two (2) Paralleling Bars (one per side).
6) Order List 116 or List 117 Internal Ground Bars as required, or External Ground Bars (see ACCESSORY DESCRIPTIONS
section) as required.
7) List 116 provides input lug landing points at the top or bottom (as specified) of the full bay length ground/return busbars.
List 116 internal return bars are rated for 1200 Amps. List 148 is available to increase that capacity to 2400 Amps and
provide additional cable landing points. Each bay can accommodate (1) List 148. List 148 offers cable termination at the
rear of the bay and the option of a bonding strap.
8) Order List 151 Cable Dressing Bars as required.
9) Order a 1’, 2’, or 4-1/2’ Box Framework Extension as required.
10) Order distribution fuses, circuit breakers, and load lugs as required per Distribution Devices and Lug Selection in
ACCESSORY DESCRIPTIONS.
11) For Load and Load Return lug-mounting hardware, order Load Lug Hardware Kits (ship-loose) as required, or order List
167 (pre-installed).
12) Order TVSS Device(s) as required per Transient Voltage Surge Suppressor (TVSS) Device in ACCESSORY
DESCRIPTIONS.
13) Order DC input lugs as required per DC Input Cable Sizes and Lugs Selection under Wiring Notes in ACCESSORY
DESCRIPTIONS.
14) Order bay frame grounding lugs as required per Bay Frame Grounding Wire Sizes and Lugs Selection under Wiring Notes
in ACCESSORY DESCRIPTIONS.
15) For remote access capability, order one (1) List 170 Ethernet option.
Home

SAG582120600 System Application Guide
Revision BK, September 27, 2017 Spec. No. 582120600 (Model 801DB NVGB)
Page 12 of 75
List 208: Common Equipment, 8-Panel Bay, w/ Advanced Metering
♦List 208 provides the common equipment for an 8-Distribution Panel BDF/CBB (Battery Distribution Fuse/Circuit Breaker
Bay) with advanced metering.
♦Configurable for top or bottom feed.
♦Consists of a 84”H x 30”W x 24”D welded box framework (seismic, zone 4 earthquake compliant).
♦Includes an Advanced Meter/Alarm Panel that provides the following functions for each panel in the bay: voltage and
current metering and Low Voltage, Power Lost, Overcurrent, and Fuse/Circuit Breaker alarms. Also provided are four (4)
external alarm relay circuits, to which any combination of alarms can be mapped.
♦Provides four (4) fused auxiliary -48V power outputs (1-1/3A), fused remote (A/B) meter panel inputs, internal/external
sense option, and an Ethernet connection (requires List 170 Ethernet option).
Restrictions
None.
Ordering Notes
1) Order up to eight (8) Lists 110 and/or List 115 Distribution Panels per bay.
2) If List 110 is ordered, order a List 150 Capacitor Precharge Assembly, if required.
3) For any open Distribution Panel position, order a List 118 Blank Panel.
4) Order List 143 or 144 Input Feed and Shunt Assembly as required. See Restrictions above. Each List 143 or 144 provides
input terminations and shunts for both sides.
For top and bottom feed 2-load applications, order one (1) List 143 or 144 and specify top or bottom feed.
For top and bottom feed multi-load applications, order two (2) or four (4) List 143 or 144 for each Side A/Side B load and
specify top or bottom feed. Order List 130 as required.
List 110 Only: For 4-load side by side applications, order four (4) List 143 or 144, and order four (4) 556103. For top and
bottom feed 2-load side by side applications, order two (2) List 143 or 144, two (2) 556103, and two (2) List 130.
List 115 Only: For 4-load side by side applications, order four (4) List 143 or 144, and order four (4) 557256. For top and
bottom feed 2-load side by side applications, order two (2) List 143 or 144, two (2) 557256, and two (2) List 130.
5) If Distribution Panels (per side) are to be paralleled, order a List 130 Distribution Panel Paralleling Bar. Each List 130
includes two (2) Paralleling Bars (one per side).
6) Order List 116 or List 117 Internal Ground Bars as required, or External Ground Bars (see ACCESSORY DESCRIPTIONS
section) as required.
7) List 116 provides input lug landing points at the top or bottom (as specified) of the full bay length ground/return busbars.
List 116 internal return bars are rated for 1200 Amps. List 148 is available to increase that capacity to 2400 Amps and
provide additional cable landing points. Each bay can accommodate (1) List 148. List 148 offers cable termination at the
rear of the bay and the option of a bonding strap.
8) Order List 251 Cable Dressing Bars as required.
9) Order distribution fuses, circuit breakers, and load lugs as required per Distribution Devices and Lug Selection in
ACCESSORY DESCRIPTIONS.
10) For Load and Load Return lug-mounting hardware, order Load Lug Hardware Kits (ship-loose) as required, or order List
167 (pre-installed).
11) Order TVSS Device(s) as required per Transient Voltage Surge Suppressor (TVSS) Device in ACCESSORY
DESCRIPTIONS.
12) Order DC input lugs as required per DC Input Cable Sizes and Lugs Selection under Wiring Notes in ACCESSORY
DESCRIPTIONS.
13) Order bay frame grounding lugs as required per Bay Frame Grounding Wire Sizes and Lugs Selection under Wiring Notes
in ACCESSORY DESCRIPTIONS.
14) For remote access capability, order one (1) List 170 Ethernet option.
Home

System Application Guide SAG582120600
Spec. No. 582120600 (Model 801DB NVGB) Revision BK, September 27, 2017
Page 13 of 75
List 110: Distribution Panel, 8-Panel Bay
Features
♦Twelve (12) TLS/TPS fuse positions, or six (6) TPL fuse positions, or a combination of TLS/TPS and TPL fuse positions.
♦Includes (12) TLS/TPS Fuseholders P/N 248817100. For panels
factory
configured in a
bay, each TPL Fuseholder P/N 516241 ordered replaces (2) P/N 248817100 Fuseholders.
♦See Load Distribution Connections under Wiring Illustrations in ACCESSORY
DESCRIPTIONS for load termination specifications.
Restrictions
640A maximum continuous.
For use in List 108 or 208.
Ordering Notes
1) Order as required.
2) Specify up to twelve (12) TLS/TPS fuseholders, or up to six (6) TPL fuseholders, or a
combination per Distribution Panel (all positions MUST be filled). This instructs the
factory how to configure the Distribution Panel. Also specify mounting location for each
configured Distribution Panel per bay. This instructs the factory where to mount each
configured Distribution Panel per bay.
3) Order distribution fuses and load lugs as required per Distribution Devices and Lug
Selection in ACCESSORY DESCRIPTIONS.
4) Replacement panels will be equipped with 12 TLS/TPS Fuseholders. TPL fuseholders (P/N 516241) may be ordered to
field modify the distribution panel. One TPL fuseholder takes the space of two TLS/TPS fuseholders.
List 115: Distribution Panel, 8-Panel Bay
Features
♦Sixteen (16) bullet nose circuit breaker and/or TLS/TPS Fuse (with bullet nose fuseholder) positions.
♦See Load Distribution Connections under Wiring Illustrations in ACCESSORY DESCRIPTIONS for load termination
specifications.
Restrictions
640A maximum continuous.
For use in List 108 or 208.
Caution: Circuit breaker with a 150 ampere or greater rating SHALL HAVE an empty
mounting position between it and any other overcurrent protective device.
Ordering Notes
1) Order as required.
2) Specify mounting location for each Distribution Panel per bay. This instructs the factory
where to mount each Distribution Panel when the bay is populated with different types
of Distribution Panels.
3) Order distribution fuses, fuseholders, circuit breakers, and load lugs as required per
Distribution Devices and Lug Selection in ACCESSORY DESCRIPTIONS.
4) Order TVSS Device(s) as required per Transient Voltage Surge Suppressor (TVSS)
Device in ACCESSORY DESCRIPTIONS.
Home

SAG582120600 System Application Guide
Revision BK, September 27, 2017 Spec. No. 582120600 (Model 801DB NVGB)
Page 14 of 75
List 116: Optional Internal Ground/Return Bar, 8-Panel Bay (Full Bay Length)
Features
♦Provides two full bay length internal ground/return bars (one per side).
♦See Load Distribution Connections under Wiring Illustrations in ACCESSORY DESCRIPTIONS for load
termination specifications.
♦Includes two (2) Input Lug Landing Plate Assemblies (one per side).
♦Can be configured for top or bottom feed.
Restrictions
For use in List 105 or List 208 only.
Ordering Notes
1) Order as required.
2) Specify mounting location of included Input Lug Landing Plate Assemblies: top for top-feed or bottom
for bottom feed.
3) List 116 internal ground/return bars are rated for 1200 Amps. List 148 is available to increase that
capacity to 2400 Amps and provide additional cable landing points. Each bay can accommodate (1) List
148. List 148 offers cable termination at the rear of the bay and the option of a bonding strap.Mounting
location (top or bottom) of List 148 will be opposite that specified for the Input Lug Landing Plate
Assemblies of List 116.
4) Order load lugs as required per Distribution Devices and Lug Selection in ACCESSORY DESCRIPTIONS.
List 117: Optional Internal Ground/Return Bar, 8-Panel Bay (Panel Length)
Features
♦Replaces a Distribution Panel on the left and right side with a panel length internal
ground/return bar.
♦Consists of two (2) ground/return bar assemblies and two (2) blank cover panels.
♦For installation in top feed or bottom feed arrangements. When used in top feed
arrangements, ground bar assemblies are installed in top most left and right Distribution
Panel mounting positions (appropriate blank cover panels are also installed in these
positions). When used in bottom feed arrangements, ground bar assemblies are installed
in bottom most left and right Distribution Panel mounting positions (appropriate blank
cover panels are also installed in these positions). When an additional List 117 is ordered,
these additional ground bar assemblies are installed in the adjacent Distribution Panel
mounting positions (appropriate blank cover panels are supplied and installed in these
positions).
♦See Load Distribution Connections under Wiring Illustrations in ACCESSORY
DESCRIPTIONS for load termination specifications.
♦See List 139 for a paralleling kit when two (2) List 117 are ordered for the same bay.
Restrictions
For use in List 108 or 208.
Ordering Notes
1) Order as required. Order two (2) List 117 for a fully configured bay. Also order one (1) List 139 Paralleling Kit if two (2)
List 117 are ordered.
2) Specify top feed or bottom feed to instruct the factory to mount the Internal Ground/Return Bars at the top or bottom of
the bay.
3) Order load lugs as required per Distribution Devices and Lug Selection in ACCESSORY DESCRIPTIONS.
Home

System Application Guide SAG582120600
Spec. No. 582120600 (Model 801DB NVGB) Revision BK, September 27, 2017
Page 15 of 75
List 118: Blank Distribution Panel Cover, 8-Panel Bay
Features
♦Covers an unused Distribution Panel position.
Restrictions
For use in List 108 or 208.
Ordering Notes
1) Order one (1) List 118 for each position in the bay that is NOT populated with a Distribution Panel.
List 120: Distribution Panel, 6-Panel Bay
Features
♦Twenty (20) TLS/TPS fuse positions, or ten (10) TPL fuse positions, or a combination of
TLS/TPS and TPL fuse positions.
♦Includes (20) TLS/TPS Fuseholders P/N 248817100. For panels
factory
configured in a bay,
each TPL Fuseholder P/N 516241 ordered replaces (2) P/N 248817100 Fuseholders.
♦See Load Distribution Connections under Wiring Illustrations in ACCESSORY DESCRIPTIONS
for load termination specifications.
Restrictions
640A maximum continuous.
For use in List 106 or List 206 only.
Ordering Notes
1) Order as required.
2) Specify twenty (20) TLS/TPS fuseholders, or up to ten (10) TPL fuseholders, or a combination
per distribution panel (all positions MUST be filled). This instructs the factory how to configure
the Distribution Panel. Also specify mounting location for each configured Distribution Panel
per bay. This instructs the factory where to mount each configured Distribution Panel per bay.
3) Order distribution fuses and load lugs as required per Distribution Devices and Lug Selection in
ACCESSORY DESCRIPTIONS.
4) Replacement panels will be equipped with 20 TLS/TPS Fuseholders. TPL fuseholders (P/N
516241) may be ordered to field modify the distribution panel. One TPL fuseholder takes the
space of two TLS/TPS fuseholders.
HomeHome

SAG582120600 System Application Guide
Revision BK, September 27, 2017 Spec. No. 582120600 (Model 801DB NVGB)
Page 16 of 75
List 125: Distribution Panel, 6-Panel Bay
Features
♦Twenty-Eight (28) bullet nose circuit breaker and/or TLS/TPS fuse (with bullet nose
fuseholder) positions.
♦See Load Distribution Connections under Wiring Illustrations in ACCESSORY DESCRIPTIONS
for load termination specifications.
Restrictions
640A maximum continuous.
For use in List 106 or List 206 only.
Caution: Circuit breaker with a 150 ampere or greater rating SHALL HAVE an empty
mounting position between it and any other overcurrent protective device.
Ordering Notes
1) Order as required.
2) Specify mounting location for each Distribution Panel per bay. This instructs the factory
where to mount each Distribution Panel when the bay is populated with different types of
Distribution Panels.
3) Order distribution fuses, fuseholders, circuit breakers, and load lugs as required per
Distribution Devices and Lug Selection in ACCESSORY DESCRIPTIONS.
4) Order TVSS Device(s) as required per Transient Voltage Surge Suppressor (TVSS) Device in ACCESSORY
DESCRIPTIONS.
List 126: Optional Internal Ground/Return Bar, 6-Panel Bay (Full Bay Length)
Features
♦Provides two full bay length internal ground/return bars (one per side).
♦See Load Distribution Connections under Wiring Illustrations in ACCESSORY DESCRIPTIONS for load
termination specifications.
♦Includes two (2) Input Lug Landing Plate Assemblies (one per side).
♦Can be configured for top or bottom feed.
Restrictions
For use in List 106 or List 206 only.
Ordering Notes
1) Order as required.
2) Specify mounting location of included Input Lug Landing Plate Assemblies: top for top-feed or bottom
for bottom feed.
3) List 126 internal ground/return bars are rated for 1200 Amps. List 148 is available to increase that
capacity to 2400 Amps and provide additional cable landing points. Each bay can accommodate (1) list
148. List 148 offers cable termination at the rear of the bay and the option of a bonding strap.
Mounting location (top or bottom) of List 148 will be opposite that specified for the Input Lug Landing
Plate Assemblies of List 126.
4) Order load lugs as required per Distribution Devices and Lug Selection in ACCESSORY DESCRIPTIONS.
Home

System Application Guide SAG582120600
Spec. No. 582120600 (Model 801DB NVGB) Revision BK, September 27, 2017
Page 17 of 75
List 127: Optional Internal Ground/Return Bar, 6-Panel Bay (Panel Length)
Features
♦Replaces a Distribution Panel on the left and right side with a panel length internal
ground/return bar.
♦Consists of two (2) ground/return bar assemblies and two (2) blank cover panels.
♦For installation in top feed or bottom feed arrangements. When used in top feed
arrangements, ground bar assemblies are installed in top most left and right Distribution
Panel mounting positions (appropriate blank cover panels are also installed in these
positions). When used in bottom feed arrangements, ground bar assemblies are installed
in bottom most left and right Distribution Panel mounting positions (appropriate blank
cover panels are also installed in these positions).
♦See Load Distribution Connections under Wiring Illustrations in ACCESSORY
DESCRIPTIONS for load termination specifications.
Restrictions
For use in List 106 or List 206 only.
Ordering Notes
1) Order as required. Order one (1) List 127 for a fully configured bay.
2) Specify top feed or bottom feed to instruct the factory to mount the Internal Ground/Return Bars at the top or bottom of
the bay.
3) Order load lugs as required per Distribution Devices and Lug Selection in ACCESSORY DESCRIPTIONS.
List 128: Blank Distributional Panel Cover, 6-Panel Bay
Features
♦Covers an unused Distribution Panel position.
Restrictions
For use in List 106 or List 206 only.
Ordering Notes
1) Order one (1) List 128 for each position in the bay that is NOT populated with a Distribution Panel.
List 130: Distribution Panel Paralleling Bar
Features
♦Parallels two Distribution Panels mounted one above the other.
♦Each List 130 includes two (2) Paralleling Bars (one per side).
Restrictions
For use in Lists 106, 108, 206 and 208.
Ordering Notes
1) Order as required.
Home

SAG582120600 System Application Guide
Revision BK, September 27, 2017 Spec. No. 582120600 (Model 801DB NVGB)
Page 18 of 75
List 139: Optional Internal Ground/Return Bar Paralleling Kit, 8-Panel Bay (Panel Length)
Features
♦Parallels the List 117 Internal Ground/Return Bars.
♦Each List 139 consists of two (2) Paralleling Bars for two sides.
Restrictions
For use with List 117 only.
Ordering Notes
1) Order one (1) List 139 if two (2) List 117 ordered for the same bay.
List 143: Bay Input Feed and Shunt Assembly (4 Cables, 25 mV. Shunts)
♦Provides landing points for four (4) input leads (on each side).
♦Provides an 800A, 25mV shunt (one per side).
♦Can be rotated for top or bottom feed configurations.
♦See DC Input Connections under Wiring Illustrations in ACCESSORY DESCRIPTIONS for
input termination specifications.
Restrictions
For use in Lists 106, 108, 206 and 208.
Ordering Notes
1) Order as required. Each List 143 provides input terminations and shunts for both sides.
For top and bottom feed 2-load applications, order one (1) List 143 and specify top or
bottom feed.
For top and bottom feed multi-load applications, order one (1) List 143 for each Side A/Side
B load and specify top or bottom feed.
2) Order input lugs as required per DC Input Cable Sizes and Lugs Selection under Wiring
Notes in ACCESSORY DESCRIPTIONS.
List 144: Bay Input Feed and Shunt Assembly (2 Cables, 25 mV. Shunts)
♦Provides landing points for two (2) input leads (on each side).
♦Provides an 800A, 25mV shunt (both sides).
♦Can be rotated for top or bottom feed configurations.
♦See DC Input Connections under Wiring Illustrations in ACCESSORY DESCRIPTIONS for
input termination specifications.
Restrictions
For use in Lists 106, 108, 206 and 208.
Ordering Notes
1) Order as required. Each List 144 provides input terminations and shunts for both sides.
For top and bottom feed 2-load applications, order one (1) List 144 and specify top or
bottom feed.
For top and bottom feed multi-load applications, order one (1) List 144 for each Side
A/Side B load and specify top or bottom feed.
2) Order input lugs as required per DC Input Cable Sizes and Lugs Selection under Wiring
Notes in ACCESSORY DESCRIPTIONS.
Home

System Application Guide SAG582120600
Spec. No. 582120600 (Model 801DB NVGB) Revision BK, September 27, 2017
Page 19 of 75
List 145: Bay Input Feed and Shunt Assembly (2 Cables, 50 mV. Shunts)
Features
♦Provides landing points for two (2) input leads (on each side).
♦Provides an 800A, 50mV shunt (both sides).
♦Can be rotated for top or bottom feed configurations.
♦See DC Input Connections under Wiring Illustrations in ACCESSORY DESCRIPTIONS for
input termination specifications.
Restrictions
For use in Lists 105 and 107 only.
Ordering Notes
1) Order as required. Each List 145 provides input terminations and shunts for both sides.
For top and bottom feed 2-load applications, order one (1) List 145 and specify top or
bottom feed.
For top and bottom feed multi-load applications, order one (1) List 145 for each Side
A/Side B load and specify top or bottom feed.
2) Order input lugs as required per DC Input Cable Sizes and Lugs Selection under Wiring
Notes in ACCESSORY DESCRIPTIONS.
List 147: Bay Input Feed and Shunt Assembly (4 Cables, 50 mV. Shunts)
♦Provides landing points for four (4) input leads (on each side).
♦Provides an 800A, 50mV shunt (one per side).
♦Can be rotated for top or bottom feed configurations.
♦See DC Input Connections under Wiring Illustrations in ACCESSORY DESCRIPTIONS for
input termination specifications.
Restrictions
For use in Lists 105 and 107 only.
Ordering Notes
1) Order as required. Each List 147 provides input terminations and shunts for both sides.
For top and bottom feed 2-load applications, order one (1) List 147 and specify top or
bottom feed.
For top and bottom feed multi-load applications, order one (1) List 147 for each Side A/Side
B load and specify top or bottom feed.
2) Order input lugs as required per DC Input Cable Sizes and Lugs Selection under Wiring
Notes in ACCESSORY DESCRIPTIONS.
Home

SAG582120600 System Application Guide
Revision BK, September 27, 2017 Spec. No. 582120600 (Model 801DB NVGB)
Page 20 of 75
J1
J1
Adapter supplied with
panels E/W TPL fuses
List 148: 2400A Ground/Return Input Assembly, with Optional Bonding Strap
Features
♦Provides additional landing points for ground/return input
leads (both sides) to the optional List 116 or 126 Internal
Ground/Return Bar.
♦Increases Ground/Return Bar rating from 1200A to 2400A.
♦Each List 148 provides two (2) Input Lug Landing Plate
Assemblies (one per side).
♦Included is an optional bonding strap for connecting both
Ground/Return Bars together for any current requirement up
to 2400A.
Restrictions
For use with List 116 and 126 Internal Ground/Return Bars only.
Ordering Notes
1) List 116 and 126 internal return bars are rated for 1200 Amps. List 148 is available to increase that capacity to 2400 Amps
and provide additional cable landing points. Each bay can accommodate (1) List 148. List 148 offers cable termination at
the rear of the bay and the option of a bonding strap. Mounting location (top or bottom) of List 148 will be opposite that
specified for the Input Lug Landing Plate Assemblies of List 116 or 126.
2) Order input lugs as required per DC Input Cable Sizes and Lugs Selection under Wiring Notes in ACCESSORY
DESCRIPTIONS.
List 150: Optional Capacitor Precharge Assembly
Features
♦Portable hand-held unit.
♦Allows capacitors of a DC load to be initially
charged before a TLS/TPS or TPL
distribution fuse is inserted. This prevents
the fuse from possibly blowing open as it is
inserted due to high capacitor charging
current.
♦Designed to plug directly into a TLS/TPS
type fuseholder case. An adapter is
supplied which plugs directly into a TPL
type fuseholder case.
Restrictions
For Use with Lists 110 and 120 only.
Ordering Notes
1) Order as required.
Home