VES EURO100 User manual

EURO100/150
In-line Extract Fans
VES Andover Ltd Eagle Close Chandlers Ford Ind. Est Eastleigh Hampshire SO53 4NF
Tel: [phone] Fax: [phone] e-mail: [email protected] web: www.ves.co.uk
Original Instructions : Installation, Operation & Maintenance Manual
ID Ref 913b • August 2014
Original Instructions : Installation, Operation & Maintenance Manual Original Instructions : Installation, Operation & Maintenance Manual
This manual must be read in full before Installation, Operation and
Maintenance of the units supplied. Please ensure that this document is
passed to the end user. This manual forms an integral part of the product
and should be kept for the working life of the product. Additional copies of
this and supporting documents are available by contacting VES or by
visiting www.ves.co.uk and following the 'Download O & M's' link.
IMPORTANT
The following symbols used within this document refer to potential dangers
or advice for safe operation
Indicates hazards associated with electric current and high
voltages
Indicates hazards that require safety advice for personnel
and/or potential unit/property damage
Indicates important information
Unit Description
The EURO duct mounted
Immediately upon receipt of your EURO fan, check there is no damage to
the fan, and that the four fixing screws and matching wall plugs are
included within the ancillary bag.
In the event of any damage having occurred or if any item is found to be
missing, it is essential to inform VES Andover Ltd. within 7 days of delivery
quoting sales order number and the unit type. After this period, VES would
be unable to accept any claim for damaged or missing goods.
inline fan for extract applications; for full unit
details please see the unit specification later in the document.
EURO100............................................Inline duct mounted fan Ø100
EURO150............................................ “ Ø150
Part Number Description
Dimensions AB C(mm) Ø
EURO100
EURO150
98 98 98 55
148 92.5 111 55
IMPORTANT
Before attempting to carry out any work on our units, all accompanying
documentation including warning labels on the unit must be referenced.
Should it be necessary to remove any component ensure that these are
secured into position once reinstalled. It is critical that after any
maintenance work has been conducted that all components removed
/replaced be refitted correctly by a competent engineer.
Ø
IMPORTANT
EURO fans should be installed in accordance with current IEE Regulations
BS7671 and the appropriate Building Regulations.
IMPORTANT
For fan positioning refer to Building Regulation for specific requirements.
If installed in a room containing a fuel burning device without a balanced
flue, it is the installers responsibility to ensure that is enough replacement
air to prevent any fumes being drawn back down the flue when the fan is
operating at full speed.
Euro fans are only suitable for mounting on the horizontal plane (flat), not
vertically.
The fan should be installed with an appropriate duct kit and consideration
must be given to ensure that access to all moving parts of the fan are
restricted when the fan is in use.
C
AIRFLOW
A
B

VES Andover Ltd Eagle Close Chandlers Ford Ind. Est Eastleigh Hampshire SO53 4NF
Tel: [phone] Fax: [phone] e-mail: [email protected] web: www.ves.co.uk
Original Instrucons : Installaon, Operaon & Maintenance ManualOriginal Instrucons : Installaon, Operaon & Maintenance Manual
WEEE Direcve
Ahe end oheir useful life the packaging and product should
be disposed of viaasuitable recycling centre. Do not dispose of
with normal household waste. Do not burn.
Standards
EURO fans conform to all relevant Brish and European
standards and direcves. Further informaon is available
from VES Andover Ltd on request
Pleaseensure thahisdocumenspassed on to theenduser
We reserve the right to alter the specificaon without noce
©VES Andover Ltd. 2010. No part of this publicaon may be
photocopied or otherwise reproduced without the prior
permission in wring of VES Andover Ltd.
Wiring Diagrams
Standard Wiring
(Typical Installaon)
Specificaon
Power Supply 230VAC 50Hz
Operang Temperature 0~40°C
Insulaon Class Double insulated
Motor Protecon IPX2
deveelSepyTrotoM
0562)mpr(deepS
Power (W) (EURO100/150)15/20
Current (A)(EURO100/150)0.12/0.13
Warranty
The fan is guaranteed against defects for 1 year from the date of purchase.
If you have any problems, contact VES at the address shown below.
Light (oponal)
Fuse
Remote/
Light Switch
Double Pole
Isolang Switch
L
N
Original Instrucons : Installaon, Operaon & Maintenance Manual
Installaon connued
Make the
connecon as per
the appropriate wiring
diagram as above. Secure the cable
using the cord grip provided. Replace the
terminal cover. The cable should exit through
the side of the ductwork adjacent to the motor.
Grommet as required.
Remove the terminal
cover, retaining all
fixings
IMPORTANT
All electrical work should be carried out by a qualified engineer and in
accordance with the current IEE Regulaons.
Before aempng to carry out any maintenance or repair work on our
units, the unit MUST BE COMPLETELY ISOLATED from its electrical supply.
Ensure a minimum of two minutes aer electrical disconnecon before
aempng access. This will allow any moving parts to come to a rest.
Using the EURO mounng
bracket, determine a
mounng posion
Place the fan into posion taking
note of the direcon of airflow
arrow.
Wire the fan as per
wiring diagram &
instrucons
Unclip/open the mounng bracket
and secure into posion using the
fixings provided. Plug mounng
holes as required
Replace the fan body and refasten
the mounng bracket, holding the
fan now into place
Secure flexible ducng to
both spigots using jubilee clips
or strangle band
IMPORTANT
Before aempng to carry out any maintenance or repair work on our
units, the unit MUST BE COMPLETELY ISOLATED from its electrical supply.
Ensure a minimum of two minutes aer electrical disconnecon before
aempng access. This will allow any moving parts to come to a rest.
Maintenance
These fans require lile in the way of maintenance.
1. Before aempng to clean, ensure that the fan is isolated completely
from the mains supply.
2. Loosen the collar and carefully clean the fan with a damp, lint free cloth.
Thoroughly dry and refit.
3. immerse the fan in water or other liquids to clean any other parts
sirollepmiehtfI.nafehtfo
damaged or soiled replace the fan unit.
No other maintenance is required. For replacement fans or install kits
please visit
Do not
Never use strong solvents to clean the fan.
www.vesdirect.co.uk
Fan
Terminals
L
N
IMPORTANT
The fan must be fused at 3A unless it forms part of a 5A lighng circuit.
An isolator should be installed to isolate all poles to the fan.

