VEVOR CZ-5 User manual

HOT DOG GRILL
Installation And Operating Manual

01
HOT DOG GRILL
CZ-5/CZ-7/CZ-11
Have product questions? Need technical suppo?
Please feel free to contact us:
CustomerSe[email protected]
NEED HELP? CONTACTUS!
Please read all manual instructions carefully before operating.
VEVOR resees clear interpretation of our user manual. The appearance
of the product shall be subject to the product you received. Please forgive
us that we won't inform you again if there is any technology or software
updates on our product.
CZ-5/CZ-7/CZ-11

02
Please read and keep these instructions. Indoor use only.
Circuit Diagram
Model: CZ-5
SA
220V
~
M
~
XP
HL1 HL2
R1 R2 R3 R4 R5
KT1 KT2
PE
Model: CZ-7
SA
220V
~
M
~
XP
PE HL1 HL2
R1 R2 R3 R4 R5 R6 R7
KT1 KT2
Model: CZ-11
SA
220V
~M
~
XP
PE HL1 HL2
R1 R2 R3 R4 R5 R6 R7 R8 R9
R10 R11
KT1 KT2
Product Features
1. Hot dog roller grills feature a convenient temperature control that makes
them energy ecient and power saving.
2. The high torque motor drive system is designed for long lasting durability.
3. All roller grills have separate controls for front and back rollers.
4. The bottom is made of stainless steel with a extra stainless steel oil plate
which keeps the machine easy to clean.
5.With Full visual glass.

03
Pas Identication(CZ-5)
12
34
6
5
10
11
12
13
714
9
8
1. On/o Switch
2. Indicator
3. Thermostat
4. Thermostat Knob
5. Rollers
6. Front Glass Holder
7. Back Glass Holder
8. Glass Holder
9. Side Glass
10. Glass Cover
11. Baseplate
12. Shell
13. Power Line
14. Oil Plate
Technical Specications
Model Voltage Power Rollers Dimensions(mm)
CZ-5 120V/60Hz 750w 5 585*270*190
CZ-7 120V/60Hz 1050w 7 585*345*190
CZ-11 120V/60Hz 1800w 11 580*495*190
Impoant Safeguards
1. Thoroughly read this instruction manual prior to rst use.
2. Do not submerge unit and/or cord in water or any other liquids. Failure
to heed this warning may result in electric shock, unit damage and/or bodily
inju.
3. Close supeision is suggested when unit its in use, especially when
children are present.
4. Check to make ensure unit is in o position and unplugged when not in
use or prior to cleaning. Allow grill to cool completely before cleaning.
5. Do not operate if the machine suers serious damage or malfunctions.
Contact dealer for repair or adjustment.
6. It is recommended that you use only manufacturer issued pas and
accessories with this unit. Using unapproved pas may result in damage or
inju.
7. Do not use outdoors.

04
8. Do not let cord hang over the edge of table or counter. Do not let it touch
any hot suaces.
9. Do not place appliance on or near gas or electric burners or heated
ovens.
10. Securely inse plug into outlet. When unplugging, be sure to remove
plug only. Never pull by the power cord.
Installation
1. To avoid equipment or electrical damage, make ceain that the nameplate
voltage is the same as the outlet voltage.
2. Electrical and grounding connections must be in compliance with the
applicable poions of the electrical code.
3. Prior to rst use, it is recommended that you clean the rollers of the
machine with a cotton or wipe-pad.
Operation Guide
1. Evenly place unfrozen hot dogs on the rollers.
2. Depending on the unit, the left knob handles the front rollers and the right
knob handles the back rollers For high-volume application use the both rows
may be used together.
3. Turn the rollers switch on the control plate to “ON”. This switch controls the
rotation of the rollers.
4. Turn the knob to the desired heat level. After 40 minutes of heating the hot
dogs, turn the temperature control knob lower to continuously keep warm.
5. The heating duration depends on the hot dogs' quality. Please adjust as
needed or required. Average heating duration is 40 minutes, but may va.
Cleaning Instructions
1. To avoid electric shock or scalding, unplug the power cord and allow the
unit to cool before cleaning.
2. Do not submerge the hot dog grill in water or directly apply liquids to clean
unit.
3. When cleaning the rollers, wipe from the end of the rollers to the center.
This will reduce grease and paicles from getting into the bearings. Proper
cleaning may extend the life of the unit and extend the period between
routine maintenance.
4. For product with high fat or sugar content, clean the rollers eve 3-4
hours.
5. Remove the hot dogs from the rollers when wiping. Do not touch the
heated rollers directly as this may result in burning or scalding.
6. Do not clean roller tubes with abrasive cleaners or scouring pads because
this may damage the rollers suace and the paicles may get into the
bearing.

05
Suggestions
1. Hot dogs must be fully unfrozen.
2. Do not leave hot dogs on the grill too long to ensure the best results. If
warming for more than four hours, the hot dogs may become thick and hard.
Hot Dog Grill with Sneeze Glass
Inseallation Procedure:
Whole set of hot doa driller
components.
Figure 1
Figure 2
use a screwdriver to unscrew
the screw in the top of both
sides of machine.
Figure 3
Install four plastic base in
correc direction as gure 3
shown.
Figure 4
Inse fan-shaped glass on
both sides.

06
Figure 5
Inse arc glass.
Figure 6
Unscrew screw , nut , gasket
of roller; then install roller by
aligning screw and gasket
and fastening nut.
Manufacturer: Weixinli Food Machine CO., Ltd.
ADD: Mayu Town, Ruian City, Wenzhou City, Zhejiang Province, China

E-mail: CustomerSe[e-mail]