VEVOR SC-5XD User manual

HOT DOG MACHINE
SC-5XD/SC-7XD/SC-11XD
USER MANUAL
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and doses not necessarily mean to
cover all categories of tools offered by us.
You are kindly reminded to verify carefully when you are placing an order with
us if you are actually saving half in comparison with the top major brands.
Support and E-Warranty Certificate
https://www.vevor.com/support

01
HOT DOG MACHINE
SC-5XD/SC-7XD/SC-11XD
Instruction Manual
MODEL NO.: SC-5XD
TOUGH TOOLS, HALF PRICE
NEED HELP? CONTACTUS!
Have product questions? Need technical support? Please feel free to contact us:
[email protected]
This is the original instruction, please read all manual instructions carefully before operating.
VEVOR reserves clear interpretation of our user manual. The appearance of the product shall
be subject to the product you received. Please forgive us that we won't inform you again if
there is any technology or software updates on our product.
MODEL NO.: SC-7XD
MODEL NO.: SC-11XD

02
IMPORTANT SAFEGUARDS
This manual will outline safety warnings and precautions, operating, maintenance and cleaning. The warnings and
instructions reviewed in this manual cannot cover all possible conditions and situations that may occur. Caution and
common sense are not built into this product, since we believe that the uses will comply with these codes.
Please read ALL the instructions before using your machine.
1. Make sure the voltage in your outlet is the same as the voltage indicated on the appliance's rating label.
2. Do not let children and minors get close to or touch the machine.
3. Do not touch the hot surface directly with your hands. Always operate with handle or knob.
4. To prevent electrical shock, do not immerse the cord or plug into water or other liquids.
5. Do not immerse the appliance in water or any other liquid.
6. Unplug the machine from the outlet when not in use and before cleaning. Cool the appliance before installing or
removing parts and before cleaning.
7. Cool down the HOT parts before operation.
8. Do not operate the device with damaged cord or plug, malfunction or with any mechanical damage. Send it to your
nearest authorized service centre for examination and repair (ONLY technicians should open up the unit).
9. Using any accessories or attachments that are not provided or recommended by the manufacturer may cause
injury.
10. If the machine is not to be used for a long period of time, unplug it, clean and cover it and store it in a dry and safe
place.
11. Do not leave the power cord hanging over the edge of table or counter or let it come into contact with any hot
surfaces.
12. Do not place the unit on or near hot air, electric burners or heaters.
13. Always switch off the power before plugging in or unplugging. Hold the plug instead of pulling on the cord.
14. Do not apply this unit to any other purposes than the indicated usage.
15. Do not use it outdoors or for commercial purposes.
16. KEEP IT OUT OF CHILDREN'S REACH.
17. DO NOT CLEAN IT WITH ANY ABRASIVE MATERIAL.
18. Never leave it unattended while in use.
19. Always check that this machine is plugged into a grounded outlet with the appropriate electrical supply. Ensure
that the wall outlet being used is properly grounded. If not, you must install a grounded outlet. Have the work
performed only by a certified electrician who is properly qualified to meet local safety and electrical codes.
20. Ensure that the power outlet, plug and cord being used are in good working condition. Damaged components
should be repaired by a certified electrician who is qualified to meet local safety and electrical codes. Even if your
power cord is functioning properly, keep it away from water and avoid letting it run over carpets or heating devices.
21. Avoid using it in the presence of flammable liquids, gases, dust or other explosive situations.
22. Extreme caution must be taken when moving an appliance containing hot oil or other hot liquids.
23. Do not operate the machine in an appliance garage or under a wall cabinet. Always unplug the unit from the
electrical outlet when storing in an appliance garage. Otherwise, it would cause a risk of fire, especially if the machine
touches the garage wall or the door touches it as it closes.
24. Type X attachment: If the supply cord is damaged, it must be replaced by a special cord or assembly available
from the manufacturer or its service agent.
25. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the
machine alone. Cleaning and user maintenance shall not be made by children without supervision.
Thank you for using this product. In order to make sure that you can operate the machine correctly, read this
instruction carefully before operation and keep it properly for future reference. Please be sure to read the precautions
and safety rules in this page to ensure your safe use.

03
PRODUCT PARAMETERS
CIRCUIT DIAGRAM
Region
North America AC110-120V 60Hz
Voltage Input Power
750W
Plug Type
American PLUG
MODEL NO.
NOTE:
1. The voltage used for this device must be the same as the power supply voltage.
2. Users need to install it near the power switch and fuse.
3. If the machine is not powered, remove the plug from the electrical outlet and check whether
the fuse is blown.
MODEL NO.: SC-5XD
North America AC110-120V 60Hz 1050W American PLUG
North America AC110-120V 60Hz 1650W American PLUG
SC-5XD
SC-7XD
SC-11XD
SB
PE NL
FC1
FC2
FR2
FR1 HL1
HL2
M
FU
FU
INPUT:AC110-120V 60Hz
SB: Power Switch
FR1: Thermostat-1 FR2: Thermostat-2
FC1: Heating Tube Group-1 FC2: Heating Tube Group-2
HL1: Heating Indicator-1 HL2: Heating Indicator-2
M :Electric Machiner FU:Fuse(10A)

04
MODEL NO.: SC-7XD
INPUT:AC110-120V 60Hz
SB
PE NL
FC1
FC2
FR2
FR1 HL1
HL2
M
FU
SB: Power Switch
FR1: Thermostat-1 FR2: Thermostat-2
FC1: Heating Tube Group-1 FC2: Heating Tube Group-2
HL1: Heating Indicator-1 HL2: Heating Indicator-2
M :Electric Machiner FU:Fuse(15A)
SB: Power Switch
FR1: Thermostat-1 FR2: Thermostat-2
FC1: Heating Tube Group-1 FC2: Heating Tube Group-2
HL1: Heating Indicator-1 HL2: Heating Indicator-2
M :Electric Machiner FU:Fuse(20A)
MODEL NO.: SC-11XD
INPUT:AC110-120V 60Hz
SB
PE NL
FC1
FC2
FR2
FR1 HL1
HL2
M
M
FU

05
PRODUCT COMPONENTS
①②③
Note: The location of the core components of these three
machines is the same!
④⑤⑥
⑦⑧⑨
1. Power Switch
2. Temperature Knob (Front)
3. Heat Light (Front)
4. Temperature Knob (Back)
5. Heat Light (Back)
6. Pan
7. Fuse
8. Protective Earthing
9. Power Socket

06
Note: The location of the core components of these
three machines is the same!
NO.
Name
Quantity
1234567 8 9
NO.
Name
Quantity
10 11 12 13 14 15 16 17 18
Screw M4x8
4 PCS
Screw M5x16
4 PCS
M5 Nylon
Support
4 PCS
M5 Silicone
Ring
4 PCS
Glass Flap
Door
1 PCS
Aluminum
Strip
1 PCS
Side Glass
2 PCS
Base
1 PCS
Curved Glass
1 PCS
Glass fastener
Front
1 PCS
Nut
4 PCS
Screw M4x6
3 PCS
Screw M4x12
2 PCS
Screw M5x16
4 PCS
Glass fastener
Right-Front
Glass fastener
Left-Front
Glass fastener
Right-Rear
Glass fastener
Left-Rear
1 PCS 1 PCS 1 PCS 1 PCS

07
OPERATING INSTRUCTIONS
TIPS & HINTS
CLEANING AND MAINTENANCE
Before using the appliance for the first time, peel off any promotional materials and packaging materials, and check
that the cooking plates are clean and free of dust. If necessary, wipe them over with a damp cloth. Spread over with
an absorbent kitchen towel and wipe off any excess oil. When your appliance is heated for the first time, it may emit
slight smoke or odor, which is normal for many heating appliances, and will not affect the safety of your appliance.
1. Place the machine on a clean, dry, level surface near a plug base outlet.
2. Plug the cord into the machine power socket.
3. Plug the cord into the wall outlet.
4. How to test your machine: Turn on the power switch, the indicator light is on; turn on the motor switch, the rollers
rotate. Turn the thermostat knob clockwise to align the knob on the temperature scale with the red triangle on the
panel, the heating indicator light is on, and the rollers start to heat. When the temperature reaches the set value, turn
the knob clockwise to about 302°F (150°C). At this time, the heating indicator light will go off, which means the it has
reached the set temperature.
5. Place the pre-prepared sausages parallelly in the middle of the two rollers, then the sausages will rotate in
opposite directions. Please do not place the sausages too close together, leaving about 0.4 in (10 mm) at the end of
each roller.
NOTE:
1. Every time you turn on the machine for the first time, you must first turn on the heating switch to preheat, and then
turn on the rotary switch to prevent the motor oil from solidification.
2. Opening of the bottom pan or both sides is not permitted, in case that you are eligible to do so.
3. Usually the baking temperature should be appropriate 248°F-320°F(120-160°C).
4. When heating, your hands are not allowed to touch the steel roller to prevent scalding.
5.When connecting or unplugging the plug, it should be disconnected from the total external power supply.
6. Keep your hands dry when plugging the cord.
1. To save electricity and reduce the heating time, you can naturally defrost the sausages or heat it by microwave
oven before.
NOTE: The pan under the rollers is used to catch drops of oil, it can also be used to preheat the sausage, but it’s not
appropriate to put the grilled sausages into it.
1. Once you have nished baking, remove the plug from the electrical outlet. Leave the machine to cool down
completely before cleaning.
2. The rollers should be cleaned every 4-5 hours of grilling.
3. For the exterior, wipe with a soft, d cloth. Never use an abrasive cleanser or harsh pad.
3. Any other seicing should be provided by an Authorized Seice Representative.

08
STORAGE
1.Always unplug the machine before storage.
2.Always make sure the machine is cool and dry before string.
Manufacturer: Guangdong Shuangchi Dining Equipment CO., LTD.
Address: No.30 Jiahua Road, Jiafu Industrial Park, Yinzhan,
QingchengDistrict, Qingyuan, Guangdong,China
Made in China

Support and E-Warranty Certificate
https://www.vevor.com/support
TOUGH TOOLS, HALF PRICE