Viatom Wellue WearO2 User manual

Get ready to take charge of your health!
Setting up your device is easy.
Follow these quick steps to get you started with your monitor.
WE
Wellue powered by Viatom®Wearable Pulse Oximeter (WearO2)
Quick Start Guide

Start monitoring
Notice:
•If the working time is less than 2 minute, the data will not be saved.
•Please avoid excessive motion for the sensed finger during recording and avoid any strong ambient
light condition.
1) Wear the device on thumb finger, index finger as option in case of too
tight for thumb. Try to move the sensor along the forefinger to find out a
best fit. Avoid being loose. Loose wearing causes inaccurate measure.
2) Turn on the device. After a few seconds, the device will begin to monitor.

Stop monitoring & sync data
Stop monitoring:
Take off the device, the countdown will begin.
(If the working time is less than 2 minute, there will be no countdown)
During the countdown, if you wear the device again, the record will be resumed.
After the countdown, the data will be ready for sync.
Sync data:
1) After the countdown, run App to sync data;
2) Or next time after you turn on the device, run App to sync.
Notice:
The device can store maximum 4 records. The oldest record will be overwritten when the 5th
record is coming in. Please sync data to your phone in time.

Bluetooth Connection
The device Bluetooth will be enabled automatically after it’s turned on.
To establish a Bluetooth connection,
1) keep the device Bluetooth enabled.
2) Make sure the phone Bluetooth is enabled.
3) Run the App.
Notice:
DO NOT PAIR in the settings of your smart phone.
Smart Vibration
The vibrator in the sensor will be activated when the SpO2 fall below the preset value (Threshold).
The vibration will stop when the SpO2 recover, or you can press the button to stop it.
You can customize the vibration to help you sleep better. Make sure your device is connected to
App first. Then you can configure it in App->Settings.
• You can switch on or off the vibration.
• You can adjust the Intensity of vibration.
• You can adjust the Threshold.