Contents
1 Precautions Relating to Use...........................2
2 Names of Component Parts ...........................5
3 Installation of the Balance and Operation
Check
3.1 Installation................................................... 9
3.2 Operation Check .......................................11
4 Function 1
4.1 Setting and Check ................................... 14
4.2 Description of Function 1........................ 15
4.3 Limit Function ........................................... 17
4.4 Interface .................................................... 18
5 Function 2............................................................ 19
6 Weighng Mode
6.1 Measurement Modes .............................. 20
6.2 Weighing Machine ................................... 20
6.3 Parts Counting ......................................... 21
6.4 Percentage Weighing.............................. 23
6.5 Unit Converting ........................................ 25
7 Accumulation function..................................... 26
8 Limit Function
8.1 Setting the Limit Function ....................... 27
8.2 Judgment and Saving ............................. 27
8.3 Display of Judgment Results.................. 27
8.4 Judge by Absolute Values ...................... 28
8.5 Judge by Deviation Values ..................... 30
8.6 Bar Graph for the 2-point Scale............. 33
9 Calibrating the Balance
9.1 Advice CAL............................................... 34
9.2 Span Adjustment with Built-in Weight ... 34
9.3 Span Test with Built-in Weight................ 34
9.4 Span Adjustment with External Weight.35
9.5 Span Test with External Weight ............. 35
9.6 Calibration of Built-in Weight.................. 36
10 Date and Time Setup..........................................37
11 Various Functions
11.1 Auto Sleep Function .................................38
11.2 Auto Power Off Function..........................38
11.3 Set Unit Function ......................................38
11.4 Minimum Indication Setting Function.....39
11.5 Double Range ...........................................39
11.6 Date Display ..............................................39
11.7 Time Stamp Output...................................39
11.8 Save Tare Weight Function .....................39
11.9 Direct Start Function.................................40
11.10 Interval Output Function ..........................40
11.11 Input of ID No. ...........................................41
12.Input/Output Functions
12.1 RS232C Output.........................................42
12.2 Output to Peripherals ...............................45
12.3 Type of Communication Texts.................46
12.4 Output Data ...............................................46
12.5 Input Commands ......................................49
13 Use Printers .........................................................54
14 Output in Compliance with
ISO/GLP/GMP.......................................................55
15 Operate on Batteries..........................................58
16 Troubleshooting..................................................59
17 Specifications......................................................61
18 Unit Conversion Table.......................................64
1
