Viking E-1600-02A Manual

EEmmeerrggeennccyyPPhhoonneessaanndd
tthheeAAmmeerriiccaannsswwiitthh
DDiissaabbiilliittiieessAAcctt((AADDAA))
IInnPPllaaiinnEEnngglliisshh
Telecom & Security Solutions
for the 21st Century!
EEmmeerrggeennccyyPPhhoonneessaanndd
tthheeAAmmeerriiccaannsswwiitthh
DDiissaabbiilliittiieessAAcctt((AADDAA))
IInnPPllaaiinnEEnngglliisshh
Telecom & Security Solutions
for the 21st Century!
VIKING Electronics, Inc.
VIKING Electronics, Inc.
Manufacturer of a wide variety of ADA-Compliant Emergency Phones to
fit almost any application and a full line of money-saving components.
Phone: ((715) 3386-88861
E-mmail: hh[email protected]
Web: wwww.vikingelectronics.com
E-11600-003B
E-11600-220A E-11600-555A
K-11600-EEHFA
E-11600-550A
E-11600A-BBLT-EEWP
E-11600A E-11600-445A E-11600-002A
ADA-Guide2005-new.qxd 11/11/2005 11:31 AM Page 1

To receive a complete Product Catalog...
Phone: ((715) 3386-88861
Fax: ((715) 3386-44344
Fax BBack: ((715) 3386-44345
E-mmail: hhe[email protected]
Web: wwww.vikingelectronics.com
...or any of these FREE Helpful Guides...
...Call, E-mail, or Fax us!
Digital
Announcers
Buyers GGuide
Door EEntry aand
Access CControl
Buyers GGuide
Fax back No. 841 Fax back No. 851
Ringdown CCircuits/
Line SSimulators
Buyers GGuide
Fax back No. 832
ADA-Guide2005-new.qxd 11/11/2005 11:32 AM Page 2

2
American’s with Disabilities Act (ADA)
What’s this all about anyway? ..............................
Do you have to install emergency phones? ............
Federal ADA Phone Requirements
The 5 Main Requirements .....................................
Areas of Rescue Assistance
What is an ARA? ..................................................
Does an ARA need an emergency phone? .............
Viking Emergency Phones
Overview .............................................................
Emergency Phone Specifications ...........................
Features ..............................................................
Specialty Viking Emergency Phones
Non-Chassis Emergency Phone ............................
Two Button Emergency Phone ...............................
Emergency Tower Phone .......................................
Emergency Phone Kit ...........................................
Other Viking Products
Line Sharing Devices ............................................
Handsfree Phone .................................................
Ringdown Circuit ..................................................
Polling and Diagnostics Kit ...................................
Blue Light Strobe Kit .............................................
Remote Touch Tone Controller ..............................
Backboxes and Gooseneck Pedestals ....................
Panel Lighting Kit .................................................
Weather-Proof Enclosures .....................................
Page 3
Page 3
Page 4-5
Page 6
Page 6
Page 7
Page 8-9
Page 9-10
Page 11
Page 11
Page 11
Page 11
Page 12
Page 12
Page 12
Page 13
Page 13
Page 13
Page 14
Page 14
Page 14
TTAABBLLEEOOFFCCOONNTTEENNTTSS
ADA-Guide2005-new.qxd 11/11/2005 11:32 AM Page 3

Do you have to install emergency phones?
If you don’t already have emergency phones in your building’s elevators, and your local
building code does not require them, then the ADA does not force you to install them.
However, you should be aware that emergency elevator phones have become standard
in the industry. If passengers were injured in your elevator and unable to summon emer-
gency help, and the failure to obtain help in a timely manner worsened their condition,
they may easily claim that you failed to follow commonly accepted building safety stan-
dards by not installing emergency phones in your buildings.
If you already have phones in your elevators, or are being asked to install them by local
building inspectors, be aware that ordinary telephones do NNOOTTcomply with ADA regu-
lations. Not only do ordinary phones fail the compliance test, they are usually far more
costly over the long run due to the continuing expenses associated with vandalism.
Replace a few stolen hearing-aid compatible handsets and you’ve already exceeded the
cost of a vandal-resistant ADA-compliant phone.
ADA requirements also pertain to all other types of emergency phones you may volun-
tarily choose to install. Whether they are being installed to meet local code, for safety rea-
sons, emergency phones in hallways, lobbies, parking ramps or garages, all of these
phones must be accessible to all users including the physically impaired. Thus, they must
all be ADA compliant.
3
What’s this all about anyway?
The diagram at the right is from the ADA
Standards for Accessible Design Regulations.
Does it look confusing? We’re going to try to
make the ADA requirements for elevator and
emergency phones easier to understand - by
putting them IINNPPLLAAIINNEENNGGLLIISSHH.
If you own or manage a building, you’re aware
of your duty to make it safe and accessible to
everyone. The passage of the Americans With
Disabilities Act (ADA) in 1992 brought with it
several new regulations pertaining to equal
building access for the disabled. Elevator access
was one of the issues addressed in the Act. So
too was the issue of equal access to emergency
assistance in the event of an elevator emer-
gency. To obtain that emergency assistance and guarantee that it be available to every-
one including the disabled, the Act put in place new requirements for the emergency
phones traditionally located in elevators.
AAMMEERRIICCAANN’’SSWWIITTHHDDIISSAABBIILLIITTIIEESSAACCTT((AADDAA))
ADA-Guide2005-new.qxd 11/11/2005 11:32 AM Page 4

4
This is to allow physically impaired passengers to operate the
phone from a wheelchair. If you were allowed to simply install
a longer coiled cord you would encounter two problems. First,
a long coiled cord is difficult to retain inside an elevator
phone cabinet–they fall out every time the cabinet door is
opened. Secondly, once they fall out, they are easily severed
by the sharp edges on the cabinet door. That means repeat-
ed replacement costs for you, and periods of noncompliance.
Also, in elevators and ARAs (Areas of Rescue Assistance),
coiled cords are an invitation to vandalism and total phone
destruction. For example, the standard procedure for attempt-
ing to vandal-proof a modular-ended coiled cord is to
remove the squeeze tab from the modular plug. This makes
theft difficult without a special removal tool. Unfortunately, it
also frustrates vandals and ultimately results in them ripping out the entire phone,
causing far more destruction to the phone, than if the modular clip were left intact.
An armored cable handset, the kind you find on many outdoor pay telephones, vast-
ly reduces the risk of handset theft and vandalism. A 29” armored cable is just about
impossible to store inside an elevator telephone cabinet. Armored cables cost far
more than standard coiled cords.
2299””
MMiinniimmuumm
1. The phone must be located no more than 48” from the floor.
This requirement is designed to keep elevator phones within the reach of wheelchair
passengers.
2. If the telephone has a handset, the handset
cord must be at least 29” long.
• They must be capable of a volume increase of at least 12 decibels with a
maximum increase of 18 decibels above normal.
• If a hearing aid compatible, volume-control handset is used, the volume increase
may exceed 18 decibels, provided that an automatic reset is provided to lower the
volume for the next use.
Hearing-aid compatible handsets with volume controls are available from most tele-
phone dealers. They are usually stocked in the “G” handset design (old style handset
with round earpiece and mouthpiece), and the “K” design (newer design with square
earpiece and mouthpiece). Unfortunately, they are rarely available in the dial-in-
handset design. Both the “G” and “K” series hearing-aid, volume-control handsets
are considerably more expensive than standard handsets. Lose one of these handsets
to vandals, and the replacement cost will exceed the phone’s value.
3. Emergency phones must be hearing aid compatible.
FFEEDDEERRAALLAADDAAPPHHOONNEERREEQQUUIIRREEMMEENNTTSS
ADA-Guide2005-new.qxd 11/11/2005 11:32 AM Page 5

5
• It is essential that emergency communication not be dependent on voice
communications alone because the safety of people with hearing or speech
impairments could be jeopardized.
Only the government could word this statement backwards. What it is saying is that,
when we think of emergency communications, we usually think of a two-way voice
conversation. However, to those with vision, hearing, and speech impairments, com-
munication takes on a different meaning entirely – and it’s not always audible.
The ADA is explicit that emergency phones must make accommodations for those
with such impairments. So, the phones must not only be capable of two-way voice
communications, but also electronic and visual communication as well.
For those with speech impairments, the phone must transmit the location of the call-
ing phone to emergency personnel. This can be accomplished by activating a prere-
corded voice message, or by transmitting an electronic or digital identifier code to the
personnel receiving the call. Viking emergency phones are Central Station
Monitoring compatible and are capable of delivering a digital announcement to
identify the location of the emergency call.
For those with hearing impairments, the phone must include a
visual indicator that the call has been received
and that help is on the way. The visual com-
munication provision can be as simple as
a light, illuminated by emergency person-
nel. Viking emergency phones have a
“Call Connected” LED which lights when
the call is answered.
4. The emergency telephone must not require voice commun-
ications alone.
It is just common sense that physically impaired passen-
gers would have difficulty using rotary dial telephones.
During a power failure, even able-bodied passengers
may have difficulty using a rotary dial phone.
Viking offers single push button dialing
which eliminates toll call abuse and
reduces vandalism. When the button
is pressed, the phones can dial up to
5 programmable emergency num-
bers and 2 Central Station numbers.
5. Emergency telephones must have push-button controls where
service for such equipment is available.
ADA-Guide2005-new.qxd 11/11/2005 11:33 AM Page 6

Does an ARA need an emergency phone?
In regards to ARAs, the American’s with Disabilities Act also states that a method of two-
way communication, with both visible and audible signals, shall be provided between
each Area of Rescue Assistance and the primary entry. The two-way communication has
similar ADA requirements as elevator telephones:
• Emergency communication must not be dependent on voice
communications alone.
• Emergency phones must include some
type of visual notification.
• Instructions on the use of the Area of
Rescue Assistance under emergency
conditions should be posted next to
the two-way communications system.
Phones in ARAs are federally mandated. In this respect, the American’s with Disabilities
Act supersedes all local codes.*
**NNOOTTEE::Elevator codes are different in every city and state. The elevator inspectors in
your area must always have the final say regarding compliance, except for ARAs. This
guide is not intended to supersede their authority, nor is it intended as legal advice.
6
What is an ARA?
AAnnAARREEAAOOFFRREESSCCUUEEAASSSSIISSTTAANNCCEE((AARRAA))iissddeeffiinneeddbbyytthheeAAmmeerriiccaann’’sswwiitthhDDiissaabbiilliittiieessAAcctt
aass::An area, which has direct access to an exit, where people who are unable to use stairs
may remain temporarily in safety to await further instructions or assistance during emer-
gency evacuation.
The ADA requires these special emergency gathering areas for disabled persons. This part
of the Act applies to multi-story residential, commercial, and retail buildings. It’s ultimate
purpose is to provide a way to locate and communicate with those persons who need
emergency assistance because they are unable to safely negotiate emergency stairways
alone.
Each area of rescue assistance shall be identified by a sign which
states "AREA OF RESCUE ASSISTANCE" and displays the interna-
tional symbol of accessibility (shown right).
AARREEAAOOFFRREESSCCUUEEAASSSSIISSTTAANNCCEE((AARRAA))
ADA-Guide2005-new.qxd 11/11/2005 11:33 AM Page 7

7
Meet all ADA requirements and more!
• Digital Voice Announcer
• Extended Temperature Range
• Dials up to 5 Numbers
• Central Station Monitoring
Capabilities
• Enhanced Weather Protection
• ADA Compliant
• Handsfree
• Vandal-Resistant
• Phone Line Powered
• Remote Programming
VIKING
EEMMEERRGGEENNCCYY//EELLEEVVAATTOORRPPHHOONNEESS
VIKING Electronics makes eight different chassis and two models with no chassis. Each
is designed with your budget and application in mind. Each phone is capable of commu-
nicating in both voice, and data format. VIKING Emergency phones allow you to transmit
location information via a programmed Touch-Tone code or ADEMCO formats, including
Ademco Contact I.D. Format, Ademco High Speed, 4+1 Express, and 4+2 Express
Format. Ademco protocols are the most commonly accepted formats in the alarm moni-
toring business today. We are continually working with other alarm equipment manufac-
turers to add their formats. In addition, to transmitting a central station compatible code
format, all VIKING phones can be programmed to send a Touch-Tone code to the receiv-
ing party.
VIKING phones come with stainless steel push-buttons and ADA-required markings,
including Braille labels. The visual and Braille markings instruct the caller “Push to Call.”
Providing a single “Push to Call” button eliminates the need for callers to read an instruc-
tion placard or search for dialing instructions during an emergency situation. Eliminating
the dial also eliminates the potential for toll abuse and the need to install a toll restrictor.
Select models are available with Enhanced Weather Protection (EWP). EWP models have
added weather protection for harsh environments (see ppage 99).
E-1600A-BLT-EWP
E-1600-45A
K-1600-EHFA
E-1600A
E-1600-55A E-1600-20A
E-1600-02A
E-1600-03B
ADA-Guide2005-new.qxd 11/11/2005 11:33 AM Page 8

8
MMOODDEELL::EE-11660000AA
DDiimmeennssiioonnss::133mm x 102mm x 51mm (5.25” x 4.0” x 2.0”)
MMaatteerriiaall::.062” (16 gauge) steel, red powder paint
CCoonnnneeccttiioonnss::Standard - RJ11, EWP - Gel-filled butt connectors
MMoouunnttiinngg::Surface mount to walls, posts, single gang boxes or 4” x 4” electrical junc-
tion boxes or recess mount in elevator phone boxes.
OOppttiioonnaallEEnnhhaanncceeddWWeeaatthheerrPPrrootteeccttiioonn((EEWWPP))::EE-11660000AA-EEWWPP
VIKING
EEMMEERRGGEENNCCYYPPHHOONNEESS
MMOODDEELL::EE-11660000-4455AA
DDiimmeennssiioonnss::133mm x 102mm x 51mm (5.25” x 4.0” x 2.0”)
MMaatteerriiaall::.062” (16 gauge) steel, high-visibility yellow powder paint
CCoonnnneeccttiioonnss::Standard - RJ11, EWP - Gel-filled butt connectors
MMoouunnttiinngg::Surface mount to walls, posts, single gang boxes or 4” x 4” electrical junc-
tion boxes or recess mount in elevator phone boxes.
OOppttiioonnaallEEnnhhaanncceeddWWeeaatthheerrPPrrootteeccttiioonn((EEWWPP))::EE-11660000-4455AA-EEWWPP
MMOODDEELL::EE-11660000-0022AA
DDiimmeennssiioonnss::330mm x 267mm x 51mm (13” x 10.5” x 2”)
CCoonnnneeccttiioonnss::RJ11
MMaatteerriiaall::.125” (11 gauge) brushed stainless steel
MMoouunnttiinngg::Flush mount in elevator cabs, ATMs, stairwells, hallways, etc.
SSuuggggeesstteeddHHaarrddwwaarree::(6) #8 x 3/4 flat head phillips sheet metal type A screws
MMOODDEELL::EE-11660000-0033BB
DDiimmeennssiioonnss::183mm x 149mm x 39mm (7.22” x 5.86” x 1.55”)
MMaatteerriiaall::.074” (14 gauge) Brushed stainless steel panel and extra heavy duty button
CCoonnnneeccttiioonnss::Standard - RJ11, EWP - Gel-filled butt connectors
MMoouunnttiinngg::Surface mount to walls, posts, single gang boxes, double gang boxes or 4”
x 4” electrical junction boxes or recess mount in elevator phone boxes.
OOppttiioonnaallEEnnhhaanncceeddWWeeaatthheerrPPrrootteeccttiioonn((EEWWPP))::EE-11660000-0033BB-EEWWPP
MMOODDEELL::EE-11660000-2200AA
DDiimmeennssiioonnss::Overall - 127mm x 127 x 57mm (5.0” x 5.0” x 2.25”)
FFrroonnttPPaanneellMMaatteerriiaall::14 gauge brushed stainless steel
CCoonnnneeccttiioonnss::Standard - RJ11, EWP - Gel-filled butt connectors
MMoouunnttiinngg::FLush mount with rough-in box or surface mount with optional VE-5x5
OOppttiioonnaallEEnnhhaanncceeddWWeeaatthheerrPPrrootteeccttiioonn((EEWWPP))::EE-11660000-2200AA-EEWWPP
MMOODDEELL::EE-11660000-5500AA
NNoottee::This is a one button 11660000AAparts kit without a chassis.
SShhiippppiinnggWWeeiigghhtt::.45 kg (1 lb)
CCoonnnneeccttiioonnss::Standard - RJ11, EWP - Gel-filled butt connectors
OOppttiioonnaallEEnnhhaanncceeddWWeeaatthheerrPPrrootteeccttiioonn((EEWWPP))::EE-11660000-5500AA-EEWWPP
MMOODDEELL::EE-11660000-5522AA
NNoottee::This is a two button 11660000AAparts kit without a chassis.
SShhiippppiinnggWWeeiigghhtt::.45 kg (1 lb)
CCoonnnneeccttiioonnss::Standard - RJ11, EWP - Gel-filled butt connectors
OOppttiioonnaallEEnnhhaanncceeddWWeeaatthheerrPPrrootteeccttiioonn((EEWWPP))::EE-11660000-5522AA-EEWWPP
ADA-Guide2005-new.qxd 11/11/2005 11:34 AM Page 9

9
Enhanced Weather Protection (EWP)
Some applications demand extra protection. Phones that are
mounted outside exposed to the elements, in salty air near the
ocean, in high humidity, exposed to a corrosive atmosphere or
vehicle exhaust all need an extra measure of weather and cor-
rosion resistance.
First, we use weather-sealed push button switches, trim
pots and DIP switches so you can adjust microphone
and speaker volumes and set programming features
right at the installation site.
Then, we hand solder all wires to eliminate the kind of corrosion that can occur in ordinary elec-
trical connectors. We also hand seal the connections at the push button switch, microphone, and
"Call Connected" LED using a special non-corrosive silicone sealant.
We use a special microphone boot that acts as a shield against water
penetration. A mylar speaker is used with rubber mounting gasket.
Closed cell foam gasketing is used behind front panels to prevent
water penetration.
Finally we "Pot" the entire board in a clear flexible urethane encapsu-
lating material leaving the weather sealed field-adjustable trim pots
and DIP switches accessible.
MMOODDEELL::EE-11660000AA-BBLLTT-EEWWPP
DDiimmeennssiioonnss::1070mm x 152.4mm x 109.3mm (42” x 6” x 4.5”)
MMaatteerriiaall::Enclosure - .125 aluminum, 76.2mm x 152.4mm (3” x 6”) tube, powder
painted high-visible yellow, Phone - .074 (14 gauge) stainless steel with stainless steel
button, Strobe - Vandal resistant polycarbonate plastic
MMoouunnttiinngg::Surface mount to rigid wall or post
SSttrroobbeeOOuuttppuutt::1,000,000 candle power
CCoonnnneeccttiioonnss::Color-coded wires with gel-filled butt connectors
EEnnhhaanncceeddWWeeaatthheerrPPrrootteeccttiioonn((EEWWPP))iissssttaannddaarrdd
MMOODDEELL::KK-11660000-EEHHFFAA
DDiimmeennssiioonnss::251mm x 174mm x 53mm (9.875” x 6.86” x 2.10”)
MMaatteerriiaall::.062” (16 Gauge) Red powder painted steel
CCoonnnneeccttiioonnss::RJ11
MMoouunnttiinngg::Recess mounted in standard elevator phone box (10.0” x 7.0” x 3.0”)
MMOODDEELL::EE-11660000-5555AA
DDiimmeennssiioonnss::Overall - 127mm x 127 x 57mm (5.0” x 5.0” x 2.25”)
FFrroonnttPPaanneellMMaatteerriiaall::16 gauge zinc plated steel
CCoonnnneeccttiioonnss::Standard - RJ11, EWP - Gel-filled butt connectors
MMoouunnttiinngg::Mount behind custom elevator panels
OOppttiioonnaallEEnnhhaanncceeddWWeeaatthheerrPPrrootteeccttiioonn((EEWWPP))::EE-11660000-5555AA-EEWWPP
FFrroonnttSSiiddee
VIKING
EEMMEERRGGEENNCCYYPPHHOONNEEFFEEAATTUURREESS
Fax back No. 859
ADA-Guide2005-new.qxd 11/11/2005 11:35 AM Page 10

10
Dials up to 5 different numbers on busy or no answer
The built-in dialer can be programmed to dial five different numbers of up to 20 digits
each. When properly programmed, the 11660000AASeries phone will cycle through the pro-
grammed speed dial numbers until answered.
The dialer is phone line powered. That means it will operate in power outage conditions
without the need for special power supplies or backup batteries. The phone can be
remotely programmed and reprogrammed over ordinary telephone lines using a 6-digit
security code.
During the dialing process, the “Call Connected” LED will flash to inform the caller that
the phone is operating. Once the call is connected, the emergency service personnel sim-
ply press a Touch Tone “✱” to steadily illuminate the “Call Connected” LED. This visual
communication, informs the caller that the call is in the process of dialing or that the call
has been received, satisfying the ADA regulations requiring both voice and visual com-
munication.
Voice message location identifier
VIKING’s voice location identifier automatically transmits your pre-recorded announce-
ment when a call is answered. Critical for situations requiring fast action or if the caller is
incapacitated. When used with central monitoring stations that do not have “voice over”
the 11660000AASeries Emergency Phones can be programmed to first send data then call
another number with the voice announcements.
Compatible with ADEMCO formats
VIKING Emergency Phones are so versatile that you can program them to call into a cen-
tral station when your staff is unavailable. Ademco formats are the most popular proto-
cols for central stations, and VIKING phones transmit four of them – Ademco Contact I.D.,
Ademco High Speed, 4+1 Express, and 4+2 Express. That makes VIKING Emergency
Phones the perfect choice for all office buildings, apartments, and factories – especially
those where in-house security is available by day, but not after hours. VIKING Emergency
Phones can first call your in-house security staff. Then, if it hears no answer, it can auto-
matically revert to a central station phone number. For a small monthly monitoring fee,
you can rest assured that all emergency calls will be handled promptly. Contact your local
alarm company about monitoring service for your emergency phones.
Handsfree communication
Each VVIIKKIINNGGADA-compliant elevator phone contains a line powered speakerphone that
boosts volume to the ADA required levels. Hands-free communication eliminates the need
for special hearing-aid compatible handsets, long coiled cords, and armored cables.
Eliminating the handset eliminates handset theft and handset vandalism. Insist on a
handsfree emergency phone!
ADA-Guide2005-new.qxd 11/11/2005 11:35 AM Page 11

11
Non-Chassis Emergency Phones
Just need the network? VVIIKKIINNGGmodels EE-11660000-5500AAand
EE-11660000-5522AAare essentially the EE-11660000AAand EE-11660000-2200AA
emergency phones without the chassis. The EE-11660000-5500AAis
a standard emergency phone and the EE-11660000-5522AAis a two
button (Help and Info) emergency phone. These are used
for applications where the elevator doesn’t require the tra-
ditional housing. Kit includes printed circuit board, speak-
er, switch, RJ-11 jack and cable harness assembly.
Two-Button Emergency Phone
The EE-11660000-2200AA(shown with optional VVEE-55xx55backbox) emer-
gency phone can dial up to 5 programmable emergency num-
bers as well as 2 central station numbers. In addition, it features
an "IInnffoo" button that will allow users to dial up to 3 non-emer-
gency numbers. Also available in a non-chassis model, the EE-
11660000-5522AA.
Emergency Tower Phone with Strobe Light
At the simple push of a button, the EE-11660000AA-BBLLTT-EEWWPPwill initiate a call
to your emergency personnel and send a digital announcement to iden-
tify the location of the emergency call. In addition, the tower phone’s
bright (1million candle power) strobe light will instantly begin flashing to
deter further activity and make it fast and easy for Police or Security per-
sonnel to locate the site of the emergency. Comes standard with
Enhanced Weather Protection (EWP).
Though the strobe requires external power to operate, rest assured that
communication is ALWAYS possible, even during power failures! All
phone numbers, location numbers and programming parameters are
stored in non-volatile memory. No batteries are required to hold the
memory.
Universal Emergency Phone Kit
The EE-11660000-5555AAis a universal ADA compliant emergency
phone kit. It is designed to be installed behind an elevator car
panel or wherever a unique panel or chassis is required for your
specific application. The EE-11660000-5555AAhas all the same great fea-
tures as VVIIKKIINNGG’s other 11660000AASSeerriieessemergency phones, but
allows the user to customize the appearance by using existing or
custom elevator/emergency panels
SSPPEECCIIAALLTTYYEEMMEERRGGEENNCCYYPPHHOONNEESS
ADA-Guide2005-new.qxd 11/11/2005 11:35 AM Page 12

12
Fax back No. 212
Line Sharing Devices
Why pay for a dedicated line for your elevator/emer-
gency phone or alarm panel?
The LLSSDD-22Line Sharing Device allows the user to
share an existing phone line with an emergency
phone or other priority alarm device. This can save
hundreds of dollars a year over leasing a dedicated
phone line. The LLSSDD-22can be used on any C.O. line
or analog PABX/KSU station.
OOTTHHEERR
VIKING
PPRROODDUUCCTTSS......
The LLCC-88Line Concentrator eliminates the monthly charges for dedicated phone lines to
each elevator cab in an office, college, hotel, hospital, etc. A call initiated by any emer-
gency phone is sent to the C.O. line. Subsequent calls
activate call waiting tones to alert the emergency per-
sonnel that another phone has gone off-hook.
All inbound calls are answered by the LLCC-88. The emer-
gency personnel then dials a Touch Tone command to
connect to one of eight phones.
Fax back No. 262
Fax back No. 225
Handsfree Speaker Phone with Dialer
The EE-3300handsfree phone is designed to provide quick
and reliable handsfree communication and can be
connected directly to a C.O. line or analog PABX/KSU
station. The EE-3300features non-volatile memory, a built
in dialer, and intelligent call progress detection for
automatic hang-up when the call is completed. The EE-
3300is also available with Enhanced Weather Protection.
Two-Way Phone Line Simulator
The DDLLEE-220000BBTwo-Way Ringdown Circuit is per-
fect for applications where emergency personnel
are in-house. It can form a private network
between the emergency phones and the security
department. As soon as the emergency phone
goes off-hook, the DDLLEE-220000BBgenerates ring volt-
age and talk battery onto the line.
Fax back No. 605
ADA-Guide2005-new.qxd 11/11/2005 11:36 AM Page 13

Remote DTMF Controllers
The RRCC-22AARemote Controller provides remote relay
operation from any standard Touch Tone telephone.
The controller is designed to be installed either local-
ly or remotely.
The RRCC-33enables a standard Touch Tone phone to con-
trol up to 3 maintained ON, maintained OFF, or
momentary relay contacts from a remote location. The
RRCC-33is fully user programmable and uses non-volatile
memory. Up to three RRCC-33’s can be daisy chained on
the same line to control up to nine relays.
Fax back No. 160
Fax back No. 165
13
Blue Light Strobe Light Kit
IIddeeaallffoorrUUsseewwiitthhTTwwoo-BBuuttttoonnEEmmeerrggeennccyyPPhhoonneess!!
The BBLLKK-33-EEWWPPprovides high visibility indication of analog line sta-
tus through a high powered one million candle power strobe light.
The BBLLKK-33-EEWWPPis the ideal solution for the hearing impaired and
can be used equally well in loud warehouses or factories, where
ringing phones can not be heard. Alternatively, the BBLLKK-33-EEWWPPcan
be used to add emergency notification to pre-existing emergency
phones by turning on the strobe light when the emergency phone
is in use.The kit includes a 4” diameter x 3" high waterproof blue
strobe, loop detector board, power supply, 20 ft of wire, wire nuts
and mounting hardware. Operational temperature range is -15°F to 130°F. The BBLLKK-33-
EEWWPPcomes standard with Enhanced Weather Protection (EWP).
Fax back No. 653
Polling & Diagnostics Kit
Providers of emergency and elevator phones
have a duty to ensure that the phones are
operable at all times. An inoperable or van-
dalized phone can mean huge liability issues.
The VVIIKKIINNGGPPBB-110000polling bridge can poll up
to 500 VVIIKKIINNGG11660000AASeries Phones on a
scheduled basis and log the results of each
poll. In addition to polling VVIIKKIINNGGphones, the PPBB-110000can also poll any telecom device
capable of returning DTMF tones. The PPBB-110000can also be used by software developers
requiring a Phone Line to RS-232 interface.
Fax back No. 232
ADA-Guide2005-new.qxd 11/11/2005 11:36 AM Page 14

Backboxes and Gooseneck Pedestals
Viking’s VE-55x5, VE-66x7 and VE-55x10 backboxes add vandal and weath-
er resistance, as well as versatility to many Viking products.
The VE-SSeries backboxes are black powder painted steel, weather resist-
ant boxes designed to be surface mounted to a single gang box, a wall
or a gooseneck pedestal.
Viking’s gooseneck pedestals are designed to be used in
conjunction with any of the VE-SSeries backboxes.
The VE-GGNP is a 4 foot tall gooseneck pedestal for pedes-
trian or car applications. The VE-GGNP-22is a 6
foot tall gooseneck pedestal with dual heights to
allow easy access for
either car or truck appli-
cations.
Enclosures for Installing Viking Products Outdoors
The VE-99x12 and VE-99x20 provide the ulti-
mate in weather protection for your Viking
product! These enclosures are constructed of
cast aluminum and are made for years of
outdoor service. The door is
labeled “TELEPHONE” and
has a gasket seal and drip
guard to keep out the harsh-
est weather. The VE-99x12
allows you to choose
between two internal mount-
ing adapter panels.
14
Fax back No. 424
Fax back No. 413
VE-GNP-2
VE-5x10 VE-6x7 VE-5x5 VE-GNP
Add Panel Lighting to Your Viking Doorbox or Entry Phone
The VE-LLIGHT kit adds bright LED illumination to any doorbox or entry phone that is
housed in a Viking VE-55x5 or VE-66x7 enclosure. The stainless steel
bracket is easily mounted using existing holes and hardware. Two
bright white LEDs are used as the light source, so there are no fil-
aments to break or bulbs to burn out.
If used with the W-11000 or W-33000, the VE-LLIGHT can be wired
directly to the AC power input of the doorbox, or use the included
12 volt power supply. Any power source between 12 and 24 volts,
AC or DC can be used to supply the VE-LLIGHT with power.
VE-LIGHT (shown
with W-3000)
Fax back No. 428
ADA-Guide2005-new.qxd 11/11/2005 11:37 AM Page 15

Viking’s Professional Digital Announcers
VIKING’s ADA Emergency Phones
with Voice Announcer and Auto Dialer
LLSSDD-22- A smart Line Sharing
Device allows your emergency
phone to share an existing phone
line. Inbound and outbound calls
on the emergency port have pri-
ority over all other calls.
PPBB-110000- Polling and diagnostics kit.
Providers of emergency and elevator
phones have a duty to ensure that the
phones are operable at all times.
Telecom & Security Solutions
for the 21st Century!
VIKING
ELECTRONICS
Fax Back: 715-386-4345
Phone: [phone]
E-mail: [email protected]
Visit Our Web Site:
http://www.vikingelectronics.com
© 2005, Viking Electronics, Hudson, WI. All Rights Reserved.
Fax bback NNo. 2215
Fax bback NNo. 2262
Fax bback NNo. 2232
Fax bback NNo. 6605
EE-11660000AA-BBLLTT-
EEWWPPBlue light
tower phone
with one mil-
lion candle
power strobe.
Safety yellow
Fax bback
No. 2217
EE-11660000AA-
Surface mount
fits standard
single gang
electrical boxes.
Painted red 16
gauge steel.
DDLLEE-220000BB- For in-house securi-
ty personnel. Provides automatic
ringing at the security phone
once the emergency phone goes
off hook. Features precise dial
tone and ringing.
LLCC-88- Line Concentrator allows
you to connect up to eight emer-
gency phones to one line. Allows
emergency personnel to direct
an inbound call to any of the
eight connected phones.
Fax bback NNo. 2225
Call oour FFax BBack SSystem ttogget iinstant iinformation oonVViking pproducts,
24 hhours aadday, 3365 ddays aayyear: 7715-3386-44345.
EE-11660000-5555AA-Universal emergency phone
kit for installing behind custom elevator
panels. 16 gauge zinc plated steel.
KK-11660000-EEHHFFAA-For mounting inside phone
cabinets. Painted red 16 gauge aluminum.
EE-11660000-0033BB- Surface mount
fits standard single gang
electrical boxes. 14 gauge
brushed stainless steel.
EE-11660000-0022AA-Flush mount with 14
gauge brushed stainless steel.
EE-11660000-2200AA-
Flush mount with
14 gauge brushed
stainless steel.
EE-11660000-4455AA- Surface mount fits standard single
gang electrical boxes. Safety yellow 16 gauge steel.
ADA-Guide2005-new.qxd 11/11/2005 11:39 AM Page 16