VIRTUFIT TR-200i User manual

TR-200i Treadmill
User manual
EN

VirtuFit TR-200I Treadmill
2EN
SAFETY INSTRUCTIONSSAFETY INSTRUCTIONS
ASSEMBLY INSTRUCTIONSASSEMBLY INSTRUCTIONS
CALIBRATINGCALIBRATING
FOLDING INSTRUCTIONSFOLDING INSTRUCTIONS
MAINTENANCEMAINTENANCE
TROUBLE SHOOTINGTROUBLE SHOOTING
CONTROL PANELCONTROL PANEL
PROGRAMSPROGRAMS
APP INSTRUCTIONSAPP INSTRUCTIONS
EXPLODED DRAWINGEXPLODED DRAWING
PARTS LISTPARTS LIST
TRAINING INSTRUCTIONSTRAINING INSTRUCTIONS
3
5 - 9
10
11 - 12
13 - 16
17 - 18
19 - 22
23 - 26
27
28
29 - 30
31
INDEX

VirtuFit TR-200I Treadmill 3
EN
– It is important to read this entire manual before assembling and using the device. Safe and
effective use can only be achieved if the device is assembled, maintained and used properly.
It is your responsibility to ensure that all users of the device are informed of all warnings and
precautions.
– Before starting any exercise program, you should consult your doctor to determine if you have
any medical or physical conditions that could put your health and safety at risk, or prevent you
from using the device properly. Your doctor’s advice is essential if you are taking medication
that affects your heart rate, blood pressure or cholesterol level.
– Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop
exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular
heartbeat, extreme shortness of breath, lightheadedness, dizziness or feelings of nausea. If you do
experience any of these conditions you should consult your doctor before continuing with your
exercise program.
– Keep children and pets away from the device. The device is designed for adult use only.
– Use the device on a solid, flat level surface with a protective cover for your floor or carpet. To
ensure safety, the device should have at least 0.5 metres of free space all around it.
– Before using the device, check that the nuts and bolts are securely tightened.
– The safety of the device can only be maintained if it is regularly examined for damage and/or
wear and tear.
ATTENTION
WARNING:
Before beginning any exercise program consult your physician. This is especially
important for people who are over 35 years old or who have pre-existing health
problems. Read all instructions before using any fitness equipment. Do not operate this
device without properly fitted guards, as the moving parts can present a risk of serious
injury if exposed.
SAFETY INSTRUCTIONS

VirtuFit TR-200I Treadmill
4EN
– Always use the device as indicated. If you find any defective components while assembling or
checking the device, or if you hear any unusual noises coming from the device during use,
stop immediately. Do not use the device until the problem has been rectified.
– Wear suitable clothing while using the device. Avoid wearing loose clothing that may get caught
in the device or that may restrict or prevent movement.
– The max user weight is 140 KGS. Braking ability is independent of speed.
– The device is not suitable for therapeutic use.
– Care must be taken when lifting or moving the device so as not to injure your back. Always use
proper lifting techniques and/or seek assistance if necessary.
– Please keep the space at least 1 to 2 meter at the end of base frame to escape any accidents!
– Place the device on a clean and flat surface. Do not place the device on a thick carpet.
– The device is for indoor use and not for outdoor use to prevent damage. Keep the storage location
dry, clean and flat. It is forbidden to use the device for purposes other than training.
– Only use the machine in an environment with an ambient temperature between 10 °C and 35 °C.
Only store the device at an ambient temperature between 5 °C and 45 °C.
Warranty claim is excluded if the cause of the defect is the result of:
– Maintenance assembly and repair work not carried out by an official dealer.
– In the event of improper use, neglect and / or poor maintenance.
– Failure to maintain the device in accordance with the manufacturer’s instructions (see the enclosed
manual).
SAFETY INSTRUCTIONS

VirtuFit TR-200I Treadmill 5
EN
STEP 1
• Let the Upright cable thought the right upright.
• Use the bolts and washer x the left and right upright.
ASSEMBLY INSTRUCTIONS
Missing parts: If you think you are missing certain parts in your package, carefully check the styrofoa and
the device. Some parts (bolts, screws, etc.) are already attached to/in the device.
Error message: Ensure that all cables are carefully attached. The aluminum legs are very sensitive and
must remain straight. Do you receive an error message after mounting your device? Then you have to
straighten these aluminum legs again, this may cause the error message to disappear.
Socket screws: The device contains socket screws, make sure that the allen key is firmly in the
bolt before you apply force to the key. In this way you prevent the head of the socket head screw from
being rotated.

VirtuFit TR-200I Treadmill
6EN
STEP 2
• Fix the strengthen tube to the uprights with bolts and washers.
ASSEMBLY INSTRUCTIONS

VirtuFit TR-200I Treadmill 7
EN
STEP 3
• Connect the console cable and upright cable.
• Assembly the console with bolts and washers.
ASSEMBLY INSTRUCTIONS

VirtuFit TR-200I Treadmill
8EN
STEP 4
• Fix the side covers with screws.n.
ASSEMBLY INSTRUCTIONS

VirtuFit TR-200I Treadmill 9
EN
STEP 5
• Put on the power cord and safety key, then power on the machine.
SELFCHECKING:
When using for the rst time, it is necessary to make the machine carry on. Remove the safety key, press
MODE and hold, then insert the safety key again, the machine enters into self-checking state. During this state,
pressing START/STOP two times , the machine begins to self –check. It stops automatically after self-checking.
Don’t stand on the machine when self-checking.
ASSEMBLY INSTRUCTIONS

VirtuFit TR-200I Treadmill
10 EN
When using the treadmill for the rst time, you must rst calibrate the treadmill:
Remove the security key, press and hold MODE, then replace the security key. The treadmill is now in the
“Self-check” mode, press START / STOP twice to perform installation. The treadmill now performs a check
independently.
IMPORTANT
Do not stand on the treadmill when calibrating the treadmill.
CALIBRATING

VirtuFit TR-200I Treadmill 11
EN
FOLDING
UNFOLDING
Hold the running deck which showed in“F”position
and then fold it up with the arrow direction until
you hear a “bang”voice from the air cylinder.
ATTENTION
It’s forbidden to fold up when the machine is
in running or incline mode.
Support place F with hand, kick the place E of
air pressure bar, then the base frame will fall
down automatically.
FOLDING INSTRUCTIONS
NOTE: Store your machine in a dry area away from children and high trac areas as shown in the
illustration. Be sure it is secure and cannot fall onto small animals or children.

VirtuFit TR-200I Treadmill
12 EN
To transport, hold the treadmill from position “F”
and tilt until the wheels are able to move on the
ground.
To tilt, start by placing one hand at position “F” to
support the top end of the treadmill. Next, place
one foot at position “D” to hold the bottom end of
the treadmill steady. With your foot at “D”, slowly
tilt the top of the treadmill downward towards
the ground. Once the Main Frame “F” reaches a
low enough point, the wheels of the treadmill will
become active.
FOLDING INSTRUCTIONS

VirtuFit TR-200I Treadmill 13
EN
CLEANING
WARNING:
Before cleaning the machine, please make sure the power has been switched o.
Cleaning:General cleaning of the device will extend the life of the treadmill. Hold clean the treadmill by
dusting regularly. Be sure to clean the exposed area of the belt and the foot rails of the treadmill on both
sides.
In addition, wear clean shoes to reduce the risk of contamination of the treadmill. Remove the hood at least once
a year to vacuum underneath.
MAINTENANCE
SEMIANNUAL MAINTENANCE
DAILY MAINTENANCE
• Clean and remove sweat after each use Do not use aggressive cleaning agents and ensure that
the device remains free of moisture.
• Check that the rail and the wheels under the seat are free from dust and dirt.
• Inspect all bolts and nuts in connection with moving parts of the device, tighten as required.
• Check the mobility of moving parts and components of the use equipment, silicone spray if
necessary.
Safeandeectiveusecanonlybeachievedifthedevicewillbeassembledandmaintained
well. It is your responsibility to ensure that the equipment is regularly maintained. Parts
that are already used and / or damaged must be replaced before continuing using. The
rower machine may only be used indoors and stored away, prolonged exposure to
weathering and changes in temperature / humidity can have a serious impact on the
electrical components and moving parts of the device.

VirtuFit TR-200I Treadmill
14 EN
This treadmill is equipped with a pre-lubricated, low maintenance deck system. The belt/ deck friction
may play a major role in the function and life of your treadmill, thus requiring periodic lubrication. We
recommend a periodic inspection of the deck. You need contact with our service center if you nd the
damage of the deck.
We recommend lubrication of the deck according to the following timetable:
•Light user (less than 3 hours/ week) annually
•Medium user (3-5 hours/ week) every six months
•Heavy user (more than 5 hours/ week) every three months
Best indicator is to lubricale when the walking platform feels dry. We recommend that you buy the
lubrication from our distributor or directly to our company.
NOTE: Any repair need the professional technician.
• We suggest that you should cut o the power for 10 minutes after keep running 2 hours, so that it’s
good for maintain the treadmill.
• For avoiding the slipping during running, the belt not too loose; for avoiding the more abrasion
between the roller and belt and maintain the machine’s good running ,the belt not too tight. You can
adjust the distance between plates and belt, the belt be away from the plates about 50-75 mm on
both sides, if the best not too tight and loose.
We strongly recommend that you do the following
• Switch o and remove the power cable from the wall after every use, especially if children are
present.
• Clean your treadmill after use.
• Use a dry cloth to clean the control panel and areas around the power switch. Use a soft clean cloth
and cleanser to remove stubborn stains and dirt o the running belt.
• Tighten the running belt once a month.
• Keep your treadmill in a safe dry place away from heat and water.
LUBRICATING THE BELT
MAINTENANCE

VirtuFit TR-200I Treadmill 15
EN
USAGE OF SILICONE OIL
Pull up tightly of the running belt. Then put the
silicone oil to running board. Then start the machine
to running 3 minutes without loading. It is better
to maintain like this every 30 hours working of the
machine. This can save lifetime of parts properly.
We recommend that you do the following:
• Disconnect the power cord after every use, especially when children are present.
• Clean the treadmill after use.
• Use a dry cloth to cover the control panel and areas around the on/o switch clean.
• Use a soft clean cloth and detergent to remove stubborn stains and dirt from the treadmill.
• Tighten the treadmill once a month.
• Keep your treadmill away from heat and water in a safe, dry place.
Regular maintenance prolongs the life of your treadmill and prevents injury!
MAINTENANCE

VirtuFit TR-200I Treadmill
16 EN
RUNNING BELT ADJUSTMENT
01. Running belt deviates to left
Start the machine, set speed at 2-3 km/h without a load on the belt, use Allen key to turn the screw 1/4
turn (see g. 1). Then allow the machine to run without a load for 1-2 minutes. Repeat process until the
belt becomes central.
02. Running belt deviate to right
Start the machine, set speed at 2-3 km/h without a load on the belt, use Allen key to turn the screw 1/4
turn (see g. 2). Then allow the machine to run without a load for 1-2 minutes. Repeat process until the
belt becomes central.
03. Running belt jam
If the running belt is in dead condition, use the Allen key to turn the screw 1/2 a turn both left and right
until the jam solved (see g 3).
04. Treadmill shocks when running
Adjust the tightness of the tire in time, as it becomes looser through use.
In this case, remove the safety pin and switch and turn the left and right adjusting bolts 1/4 turn
clockwise.
Start walking again until the tire has the correct tightness.
MAINTENANCE

VirtuFit TR-200I Treadmill 17
EN
This treadmill is designed in a way that in the event of an electrical fault, the machine will turn o
automatically to prevent any injuries to the user and to prevent damage to the machine (i.e. motor). When
the treadmill behaves erratically, simply reset the treadmill by turning the power switch o, waiting for 1
minute then turning the power button back on.
If, after you have reset the treadmill, it is still not running correctly, please run the self-checking analyse
(please refer to Self-Checking) to distinguish what type of error problem the machine is encountering.
Before attempting any work on the treadmill, ensure that the power is o and the plug is removed from
the power point. Do not use extension leads as it may lead to power decrease and failure.
ERROR CODE DESCRIPTION SOLUTION
E02 Over voltage protection of
motor
1. Make the machine self-checking again
2. Change the controller
E03 Over current protection
1. Clean the dust between running board and belt,
then put some oil
2. If the running belt wear seriously, please change
running belt
E04 The motor open circuit
1. Check the connect wire of motor, if the connect
wire loose, pls connect it again
2. The motor carbon brush wear, replace the carbon
brush or motor
3. Change the controller
E05 EEPROM damage or access
problems Change the controller
E06 Communication error Check the connect wire between incline motor and
control board, if it loose or broken, pls change the wire
E07 Incline error when self-
checking
1. Check the connect wire between incline motor and
control board, if it loose or broken, pls change the wire
2. Change the incline motor
E08 Speed error when self-
checking
1. Check the distance from speed sensor to the
magnetic of roller, and ajust it with 3mm
2. Change the speed sensor
E09 Short-Circuit problem Change the control board
TROUBLE SHOOTING

VirtuFit TR-200I Treadmill
18 EN
TROUBLE SHOOTING
ERROR CODE DESCRIPTION SOLUTION
“-” Safety key not connected Insert safety key
ER
When treadmill at
running state, the incline
window display“Er”, it is
incline VR error
1. Check the connect wire between incline motor
and control board, if it get loose or broken, pls connect
it again or change it
2. Change the incline motor
No Power
• Check fuses (They are located on the controller under the motor cover).
• Check power outlet (Plug something else into the power outlet to ensure that the power outlet is
working correctly).
• Check Power Cable (You may need to take it to an electrician).
• Ensure that the safety key is installed, as the treadmill will not power on without it.
If you can not solve the problem, please contact your dealer.

VirtuFit TR-200I Treadmill 19
EN
CONSOLE
BUTTON FUNCTION
MODE Power on the machine, press it to choose pre-set programs P1-P36. Press CLEAR/
SET to exist.
START/STOP Power on the machine, press it to start running. When running,press it to stop and
record the running. Press CLEAR/SET to clear up the record.
CLEAR/SET Power on the machine, press it to choose time,distance,calorie count-down
training. When running, clear up time,distance and calorie.
(4) SPEED + When running, press it to increase speed by 0.5km/h. Hold on it, speed is increased
continuously.
(5) SPEED - When running, press it to decrease speed by 0.5km/h.Hold on it, speed is deceased
continuously.
(6) QUICK
SPEED Speed 3,6,9, when running, press it to choose speed.
CONTROL PANEL

VirtuFit TR-200I Treadmill
20 EN
BUTTON FUNCTION
(7) INCLINE + When running, press it to increase incline by 1 level. Hold on it, incline is increased
continuously.
(8) INCLINE - When running, press it to decrease incline by 1 level. Hold on it, incline is decreased
continuously.
(9) QUICK
INCLINE Incline 3,6,9, when running, press it to choose incline.
(10) INCLINE +
in handvatten
When running, press it to increase incline by 1 level. Hold on it, incline is increased
continuously.
(11) INCLINE -
in handvatten
When running, press it to decrease incline by 1 level. Hold on it, incline is decreased
continuously.
(12) SPEED +
in handvatten
When running, press it to increase speed by 0.5km/h. Hold on it, speed is increased
continuously.
(13) SPEED -
in handvatten
When running, press it to decrease speed by 0.5km/h.Hold on it, speed is deceased
continuously.
CONTROL PANEL