54
INTRO
INTRO
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
When using an electrical product, basic precautions should always be
followed, including the following:
Read all instructions before using this exercise product.
To reduce the risk of burns, fire, electrical shock or
injury to persons:
• Use this exercise product for its intended use as described in
this Owner’s Guide. Only use attachments recommended by the
manufacturer.
• Never drop or insert any object into any opening.
• Do not remove the Suspension Elliptical Trainer side covers. Service
should be performed only by an authorized VISION FITNESS retailer.
• Never operate this Suspension Elliptical Trainer if it has a damaged
cord or plug, if it is not working properly, or if it has been damaged or
immersed in water. Please contact your authorized VISION FITNESS
retailer for service.
• Keep the cord away from heated surfaces.
• Do not use outdoors.
• To disconnect, turn the switch to the OFF position, then remove plug
from outlet.
•
Only use the power cord provided with your VISION FITNESS
Suspension Elliptical Trainer.
• Never place the power cord under carpeting or place any object on
top of the power cord that may pinch and damage it.
• Unplug your Suspension Elliptical Trainer when not in use and before
moving it.
CHILDREN
• Keep children off your Suspension Elliptical Trainer at all times.
• When the Suspension Elliptical Trainer is in use, young children and
pets should be kept at least 10 feet away.
WARNING!
OTHER SAFETY TIPS FOR YOUR VISION FITNESS SUSPENSION
ELLIPTICAL TRAINER
CAUTION! If you experience chest pains, nausea, dizziness or shortness
of breath, stop exercising immediately and consult your physician before
continuing.
• Do not wear loose clothing that might catch on any part of the
Suspension Elliptical Trainer.
• Read this Owner’s Guide before operating this Suspension Elliptical
Trainer.
CLEANING
• Clean only with mild soap and a slightly damp cloth; never use solvents.
SAFETY MODE
Your S7200 is equipped with a Safety Mode that keeps your S7200 in its highest
resistance level while not in use to help prevent the pedals from being moved. By
default this mode is disabled, but it can be enabled in the Engineering menu (see
Page 28).
POWER REQUIREMENTS
This product is for use on a nominal 120-volt circuit, and has a grounding plug
that looks like the plug illustrated below. An improper connection of the equipment
grounding conductor can result in a risk of an electrical shock. Do not modify the
plug that was provided with this product. If this plug does not fit into your outlet, have
a qualified electrician install the proper outlet. Adapters, extension cords and surge
protectors should not be used with this product. NOTE: 120V is for use in North
America. This product may take 120V or 220V power in other regions.