Vividia W2240 User manual

Vividia
®
W 2 2 40 W i Fi / USB 2 - Way A r ti culati ng B orescope
User’s Manual
Model: W2240
Please carefully read this manual before using

1/7
Parts & Functions
Freeze button
Power On/ Off
Snap/Rec button
Steering wheel
Angulation locker
USB port
Status indicator
Toggle switch(wifi-usb)
Start up
Light adjustment Charge port (Micro usb)
Press the power button to turn on the device. Indicator lights will flash accordingly. Turn the steering wheel to control
distal end directions to inspect objectives. Turn the light adjustment wheel to control the brightness at camera head.
Two modes are available to display image on your devices: WIFI (wireless) or USB (cable connection to PC or Android)
WIFI: Toggle the switch on to wireless side, camera image will be showed on
a smart phone or tablet. (Applicable for iPhone, iPad or android devices)
USB: Push to USBside, W2240 will be used on PC or a smart phone (android).

2/7
WiFi mode
1. Download & install APP
Scan the QR code below or find ‘Mo-view’at APP store (Apple or Google play store), then download
and install the app to your phone or tablet.
“Mo-view”icon on
your phone
QR code
2. Push the toggle switch to the wifiside. Press power button, blue indicator light will turn on.
3. Search wifisignal ‘iscope _xxxxxx’ on your phone/tablet wifi setting, tap to
connect the wifi camera. Press the snap button to take phone or record video
(short press for snap photo, and long press to record)
4. Open the app “Mo-view”, then you will see the preview video
5. Freeze frame by press the freeze button.
You can do the same from the app interface as shown below:

3/7
•Take photo 2. Take video 3. Playback 4. Resolution setting
USB mode
Push the toggle switch to the USB side, blue and green indicator lights will turn on.
On Windows 10/8/7/XP/Vista etc. you can download and install “Vividia Ablescope Viewer”, “Amcap” “Oasis.exe” software
from our website; On Windows 10, you can use the built-in software “Camera”.
On a MacOS PC, built-in software “Photo Booth” can be used. Make sure to select right camera.
W2240 borescope can be used on Chromebook and Linux OS too. Search our websites to find out more.
Connect USB cable to PC and W2240 borescope. Then open an appropriate software, click “preview” if needed, live image
will show on the PC screen. You can take pictures and record videos with the software. The snap/recording button on the
W2240 device does not work when it is connected through USB port.
1
2
3
4

4/7
Android devices (phone or tablet):
If you choose to connect smartphone (Android only), please download and install the APP first. Search ‘USB
camera’, or “OTG view” or “MScopes” from Google play store or scan QR code below to install the apps on your
phone or tablet.
OTG adaptor
Get “USB CAMERA”icon
on your phone or tablet
QR code
Open the APP, you will see the real-time video and working interface as shown below:

5/7
1
5 2
3
4
1. Take photo 2. Take video 3. Playback 4. Resolution setting 5.Image rotation
Charging
1. Only one white light on indicates low power and need charging. Please use 5V 1A USB charger.
2. During charging, white light flashes. It will take around 3 hours for full charge, three white lights on
without flashing.
3. Build-in 3000mAh lithium battery. It can work for about 6 hours after it is fully charged.
Specification
Camera diameter 4 mm (0.157”)
Insertion cable length 1 meter (39.3”)
Bending probe tip length 35 mm (1.38”)
Depth of view 120 degree
Field of view 8-150mm
Effective pixels 1 MP
Operating temp 0-50 degree C
Battery 3000mAh lithium battery
Waterproof IP67 (camera probe and insertion cable only)

6/7
Output WiFi wireless and USB2.0
Wireless range: ~ 5 meter (5.5 yard)
Articulation 2-way, up and down, each direction max. 180 degree
Probe tube material stainless steel braided mesh layers
Lighting 6 bright LED lights
Picture & Video format jpeg/bmp, avi
Safety Warning
Do not modify or disassemble the unit
.
Do not look directly into illumination being emitted by distal end to avoid eye damages .
Do not pull the insertion tube or other cables with strong force. Do not move the main
unit around by holding the cables to avoid damaging the insertion tube.
Do not subject the distal end to severe impact or pulling. D o not expose the angulation
section to severe impact or bending . The precision components that make up the distal
end and the angulation section could be damaged .
Do not allow any liquids other than water , saltwater , machine , or diesel oil to contact
with the insertion tube . Clean the probe and tube often to keep them clean and dry/
Do not allow water to come into contact with parts other than the insertion tube.
T he parts of the instrument other than insertion tube are not waterproof , so the
instrument should not be used or stored where it is submerged or wet .
Do not use or store the instrument at a temperature higher than 50 ° C or lower
than - 10 ° C .
Store the instrument in dry and adequately ventilated environment .

7/7
Disposal of this product
To prevent possible harm to environment or human health from uncontrolled wastes disposal,
please separate this item from other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources.
What is in the package
USB cable
Charging cable
OTG Adaptor
Vividia Technologies
www.vividia-tech.com
Greenville, SC, USA
Borescope unit