Vivo DESK-SHELF24C User manual

Above/Below Clamp-on
24” Dual Shelf
Instruction Manual
SKU: DESK-SHELF24C
Assembly Video & Product Info
www.vivo-us.com/products/desk-shelf24c

2 3
A (x2)
Shelf
B(x2)
Vertical
Support
S-A (x2)
M4x10mm Screw
T-A (x1)
4mm Allen Wrench
T-B (x1)
6mm Allen Wrench
S-B (x4)
M6x12mm Screw
S-C (x12)
M6x30mm Screw
S-D (x2)
M8x50mm Screw
S-E (x2)
M4 Washer
E (x2)
Clamp Plate
F (x2)
So Pad
D (x2)
Clamp Brace
Phillips
Screwdriver Per Shelf
C (x2)
Shelf
Bracket
If you do not understand these directions, or if you have any doubts about the safety of the installation, please
contact our product support team at 309-278-5303 or [e-mail] for further assistance. Check carefully to
make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not
use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We
cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
LBS
CAUTION!
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
DO NOT EXCEED WEIGHT CAPACITY
FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY.
Package Contents
We’re Here for You Included Hardware & Tools
Tools Needed:
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
Chat Us:
www.vivo-us.com
Give us a Call:
309-278-5303
Email Us:
[email protected]om AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
Weight Capacity:
11lbs
(5kg)

4 5
ASSEMBLY STEPS
STEP 1
STEP 3
Secure Shelf (A) into top holes on Vertical Support (B) using M6x30mm Screws (S-C) and 4mm
Allen Wrench (T-A).
Secure remaining Shelf (A) to Shelf Bracket (C) using M6x30mm Screws (S-C) and 4mm Allen
Wrench (T-A).
Attach Shelf Bracket (C) to middle holes of Vertical Support (B) using M6x30mm Screws (S-C) and
4mm Allen Wrench (T-A). Select mounting holes based on desired shelf height.
S-C
T-A
B
A
STEP 2
S-C (x4)
T-A
C
A
S-C
T-A
S-C (x4)
T-A
S-C
4 HEIGHT
SETTINGS
2
4
1
3
C
B
T-A
S-C (x4)
T-A

6 7
STEP 4a
Two Assembly Options
** READ BEFORE PROCEEDING * *
This desk shelf can be installed to sit above or below your desk. Choose your
desired use and follow the appropriate steps on the next pages.
A. ABOVE DESK
Page 7-9
B. BELOW DESK
Page 10-11
--- Above Desk Assembly ---
Thread M8x50mm Screws (S-D) into Clamp Braces (D) with Clamp Plate (E), M4x10mm Screws (S-A)
and M4 washer (S-E). Tighten using 6mm Allen Wrench (T-B) and a Phillips Screwdriver.
S-D (x2)S-A (x2)
S-E (x2)
T-B
S-A
S-E
E
D
S-D
T-B
STEP 5a
Remove adhesive backing from So Pads (F) and apply to Vertical Supports (B) as shown below.
F

8 9
B
S-B
T-A
STEP 6a
S-B (x4)
T-A
First Set
15.4 - 47.6mm/0.6 - 1.8”
Desktop Thickness
Second Set
0- 27.59mm/0 - 1.08”
Desktop Thickness
Desk Thickness Assembly
Mount the clamp assemblies to Vertical Supports (B) using M6x12mm Screws (S-B) and 4mm Allen
Wrench (T-A). Remove adhesive backing from So Pads (F) and apply to Vertical Supports (B) as
shown below.
STEP 7a
Secure the shelf assembly above the desktop by tightening M8x50mm Screws (S-D) using 6mm Allen
Wrench (T-B).
T-A
S-D
T-B
Assembly Complete!