Vivo DESK-M051MB User manual

Black Compact Crank Height Adjustable Desk Frame
Follow along step-by-step with our video walk through by scanning
the QR code with your mobile device or by following the product
link: vivo-us.com/products/desk-m051mb
Instruction Manual
SKU: DESK-M051MB
ASSEMBLY VIDEO AVAILABLE:
[email protected]om www.vivo-us.com 309-278-5303

Contact Us First!
PERSONABLE CUSTOMER SUPPORT
Our friendly product support team is here to help!
DO NOT RETURN ITEM
We’re Here for You!
Missing a Part?
Our customer-minded support team is here for YOU,
Monday-Friday 7am-7pm CST.
We oer immediate assistance with rapid response times
from customer service agents and product techncians to
help you every step of the way!
Monday-Friday
Chat Us:
www.vivo-us.com
Give us a Call:
309-278-5303
Email Us:
[email protected]om
If any parts are received damaged / defective OR you are
missing a part, please reach out to us within 30 days of
product delivery to have it replaced at no cost.
We are happy to replace parts to ensure you have a fully
functioning product
7AM - 7PM

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a qualified
technician. Check carefully to make sure there are no missing
or defective parts. Improper installation may cause damage or
serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual. Do not exceed weight capacity. We
cannot be liable for damage or injury caused by improper mounting, incorrect
assembly or inappropriate use.
PRE-ASSEMBLY | BEFORE YOU BEGIN
Product Warranty
Returns | Product Didn’t Work Out?
For the most up to date details on your product’s warranty, please visit
the product’s listing on our website or reach out to customer support.
vivo-us.com/products/desk-m051mb
We oer a hassle-free 30 day return on all products. Contact customer
support at 309-278-5303 or [email protected]om. Please note: For items
ordered in error or no longer needed, the return shipping charges will
be at the buyer’s expense.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS
REQUIRED.
WEIGHT CAPACITY
DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious injury.
154lbs
(70kg)
!
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC
SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
• DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
• DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
• NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR
SELLER TO REPLACE DAMAGED PARTS.
• NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE
MADE CONTACT WITH LIQUIDS.
• ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
• OUTDOOR USE IS PROHIBITED.
ELECTRICAL WARNING :

4
PACKAGE CONTENTS
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
A (x1)
Telescopic
Crossbar
B(x1)
Leg
C(x1)
Leg with
Gearbox
D (x2)
Side Bracket
Please consult the parts list below and ensure you have everything you need to assemble
your product. If parts are missing or damaged, please contact us.
Phillips Screwdriver
|
TOOLS NEEDED:
DIFFICULTY LEVEL
E (x2)
Foot
F (x1)
Sync Rod
Drill Level
G (x1)
Crank Handle
H (x1)
Crank Handle Sync
Rod
T-B (x1)
4mm Allen
Wrench
T-C (x1)
5mm Allen
Wrench
T-D (x1)
Wrench
S-A (x4)
M6x25mm
Screw
S-C (x8)
M6x35mm
Screw
S-D (x2)
ST4.2x15mm
Rounded Head
Screw
S-E (x10)
ST4.2x15mm
Screw
S-B (x4)
M6x10mm
Screw
T-A (x1)
2.5mm Allen
Wrench
I (x1)
Crank Handle Sync
Rod Extension

5
STEP 1: Extend the Crossbar
ASSEMBLY STEPS
Loosen the screws on Telescopic Crossbar (A) using 4mm Allen Wrench (T-B) and extend the
sides.
STEP 2: Install the Crossbar to Legs
Attach Telescopic
Crossbar (A) to Leg (B)
and Leg with Gearbox (C)
using M6x25 mm Screws
(S-A).Tighten with 4mm
Allen Wrench (T-B).
A
T-B
A
B
C
S-A
T-B
A
Telescopic
Crossbar
T-B
4mm Allen
Wrench
B(x1)
Leg
C
Leg with
Gearbox
T-B
4mm Allen
Wrench
S-A
M6x25mm Screw

6
STEP 3: Mount Side Brackets
Assemble Side Brackets (D) to the frame assembly using M6x10mm Screws (S-B) and 5mm
Allen Wrench (T-C).
STEP 4: Assemble Feet
Mount Feet (E) to Leg (B) and
Leg with Gearbox (C) using
M6x35mm Screws (S-C) and
4mm Allen Wrench (T-B).
E
S-C
T-B
B
C
D
Side Bracket
T-C
5mm Allen
Wrench
S-B
M6x10mm Screw
E
Foot
T-B
4mm Allen
Wrench
S-C
M6x35mm Screw

7
S-D
STEP 5: Adjust Frame Length
Extend Telescopic Crossbar (A) to fit the desktop. Retighten the screws on Telscopic Crossbar (A)
using 4mm Allen Wrench (T-B).
STEP 6: Attach Desktop
A
T-B
Secure the frame assembly to
the desktop using ST4.2x15mm
Screws (S-E) and a Phillips
screwdriver.
NOTE: If using the provided
screws to secure your desktop,
ensure the desktop thickness is
3/4” (19mm) or greater.
T-B
4mm Allen
Wrench
S-E
ST4.2x15mm Rounded
Head Screw

8
STEP 7: Install the Sync Rod
Loosen the knob on Sync Rod (F) and insert the rod into Leg (B). Extend Sync Rod (F) onto
Leg With Gearbox (C). Tighten both knobs on Sync Rod (F) using Wrench (T-D).
F
Sync Rod
T-D
Wrench
12
34
F
B
C
T-D

9
12
34
1.5”
H
T-A
C
G
S-D
I
If the desktop is too wide,
replace the hex rod inside Crank
Handle Sync Rod (H) with Crank
Handle Sync Rod Extension (I).
STEP 8: Mount the Crank
Loosen the set screw on Crank Handle Sync Rod (H) using 2.5mm Allen Wrench (T-A) to extend the rod into
Leg With Gearbox (C). Assemble Crank Handle (G) to Crank Handle Sync Rod (H) making sure Crank Handle
Sync Rod (H) sits inside of the recess on the plastic mounting bracket on Crank Handle (G). Retighten the set
screw on Crank Handle Sync Rod (H). Secure Crank Handle (G) to the desktop using ST4.2x15mm Rounded
Head Screw (S-D) and a Phillips screwdriver.
NOTE: Leave at least 1.5” (40mm) of space from the mounting holes on Crank Handle (G) to the edge of the
desktop, which will allow the crank to be fully pushed in.
STEP 9: Adjusting the Height
Turn Crank Handle (G) counter clockwise to raise the desk, and clockwise to lower. Slide Crank
Handle (G) in and flip the handle around to store it when not in use.
G
G
Crank Handle
H
Crank Handle Sync Rod
T-A
2.5mm Allen Wrench
S-D
ST4.2x15mm Rounded
Head Screw
I
Crank Handle Sync
Rod Extension

10
3
CHECK OUT OTHER GREAT PRODUCTS FROM
EXPLORE MORE AT VIVO-US.COM
We oer a wide array of home & oice products
to fit your needs. From height adjustable desks to
monitor mounts to keyboard trays and more!
MONITOR
MOUNTS
SPEAKER MOUNTS
& STANDS
From single monitor
mounts to hex mount,
gromment or clamp-ons,
we’ve got a mounting
solution for your setup.
Whether you’re mounting
a soundbar or surround
sound system, we’ve got
a mounting solution to fit
your needs
CABLE
MANAGEMENT
From single monitor
mounts to hex mount,
gromment or clamp-ons,
we’ve got a mounting
solution for your setup.

11
WHO WE ARE
VIVO is more than a brand of ergonomic oice furniture. We are a team of
creative and innovative indivuduals working together to oer high quality,
aordable ergonomic solutions. We think and work outside of the box to serve
you, our customer, to the best of our abilitiy.
Need Assistance?
Personable Customer Support | Mon-Fri 7am-7pm
We Would Love to Help!
We oer immediate assistance with rapid response times from
customer service agents and product techncians to help you every
step of the way!
Call Us: 309-278-5303
Average Resolution Time: 5m 4s
Chat Us: www.vivo-us.com
Average Resolution Time: < 15m
Email Us: [email protected]om
Average Resolution Time: 1HR 8M
23% within < 15m
38% within < 30m
61% within < 1hr
83% within <2hr
92% within < 3hr

LAST UPDATED: 07/20/2022
REV1.1LF
Ready to share that new amazing
setup? Want to brag about that
amazing new ergonomic solution?
Tag us in your photo!
FOR MORE GREAT VIVO PRODUCTS,
CHECK OUT OUR WEBSITE AT: WWW.VIVO-US.COM
LOVE YOUR NEW VIVO SETUP?
VIVO-us @vivo_us