Vivo DESK-TOP1B User manual

62.5" x 31.5" Three Section Table Top
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-top1b
[email protected]om www.vivo-us.com 1-800-371-5654
SKU: DESK-TOP1B

2
Phillips
Screwdriver
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
PACKAGE CONTENTS
TOOLS NEEDED
ASSEMBLY STEPS
STEP 1
WARNING!
B (x1)
Desktop Section
STEP 2 (Electric Desk Only)
Mount cable management tray with support
brackets from desk frame to rear support
bar (A) using the thumbscrews from the tray
support brackets.
A (x2)
Support Bar
C (x24)
M5x12
Mounting to an Electric Height Adjustable Desk Base
Place and align desktop section (B) upside down
on protective surface. Assemble support bars (A)
to desktop using 12 screws (C).
STEP 3a
Place electric height adjustable desk frame upside
down on the desktop. Adjust frame width to match
desktop mounting holes, and secure frame to
desktop using 8 screws (C).
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

3
Mount control pad to mounting holes on le or right side of desktop using screws from the desk frame.
Then, mount to an electric height adjustable desk base.
STEP 4a
Mounting to a Manual Height Adjustable Desk Base
STEP 3b
Place manual height adjustable desk frame upside down
on desktop, making sure the crank gearbox is on the same
side as the crank mounting holes in the desktop. Adjust
frame width to match desktop mounting holes, and secure
frame to desktop using 8 screws (C).
STEP 4b
Mount to a manual height adjustable desk frame. Attach crank to desk frame. Align crank support with
mounting holes in desktop and secure using 4 screws (C).

Last Updated: 05/02/2018
If any parts are received damaged or defective, please contact us. We are happy to
replace parts to ensure you have a fully functioning product.
For more VIVO products, check out our website at:
www.vivo-us.com.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected]om www.vivo-us.com 1-800-371-5654