Vivo MOUNT-PLAY1B User manual

LAST UPDATED: 03/05/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can off er immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[e-mail] AVG. RESPONSE TIME (within off ice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within off ice hrs): < 15 M www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within off ice hrs): 5M 4S
309-278-5303
Black Dual Wall Mount Designed for Sonos One, One
SL, Play 1
Instruction Manual
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/mount-play1b
SKU: MOUNT-PLAY1B
[e-mail] www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
ASSEMBLY STEPS
STEP 1
Separate the mount (A) into the wall
bracket and support.
PACKAGE CONTENTS
WARNING!
B (x2)
Support
Bracket
C (x2)
Cover
D (x4)
Anchor
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
TOOLS NEEDED
Phillips
Screwdriver
Drill
E (x4)
Wall Screw
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO
MOUNT. We include mounting for brick and concrete walls. If unsure, please contact us at vivo-us.
com, email at [email protected]om, or call us at 309-278-5303.
6.6lbs
(3kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
F (x2)
Pan Head Bolt
G (x2)
Flat Head Bolt
H (x1)
Allen Wrench
A (x2)
Mount
3
STEP 2
OPTION A: Wood Stud Installation
Use the wall bracket to mark
mounting holes on the wall where a
stud is located. Use of a stud finder
and level is recommended. Drill 2.2”
(55mm) deep holes using a 3/16”
(4.5mm) drill bit. Secure the wall
bracket using wall screws (E) and
press the cover (C) into place.
OPTION B:Brick/Concrete Wall
Installation
Use the wall bracket to mark
mounting holes on the wall
where a stud is located. Use of
a level is recommended. Drill
2.4” (60mm) deep holes using a
3/8” (10mm) drill bit and press
anchors (D) into the holes.
Secure the wall bracket using
wall screws (E) and press the
cover (C) into place.
STEP 3
STEP 4
Route the speaker power cable
through the slot in the support.
Place the speaker on the support,
then secure using the support
bracket (B) and flat head bolt (G)
with a Phillips screwdriver.
Place the support with speaker on the wall bracket, and secure using the pan head
bolt (F) and a Phillips screwdriver. Adjust tilt support using the Allen wrench (H).