Vivo STAND-V002LG User manual

Dual Vertical Monitor Desk Stand with Glass Base
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v002lg
SKU: STAND-V002LG
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A (x2)
VESA Plate
I (x1)
Plastic Cover
S-A (x4)
M6x10mm
Screws
S-B (x3)
M6x16mm
Screws
S-C (x4)
M6 Washers
S-D (x2)
Thumbscrew
M-A (x8)
M4x12mm
Screws
T-B (x1)
6mm Allen
Wrench
T-A (x1)
4mm Allen
Wrench
M-D (x8)
M5x16mm
Screws
M-E (x8)
M5 Washer
M-F (x8)
Spacer
M-C (x8)
M5x12mm
Screws
M-B (x8)
M4x16mm
Screws
J (x4)
Foot
K (x4)
Felt Pad
L (x2)
Cable Clip
B(x2)
Tilt Joint
C(x1)
Base
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please contact our product support team at 309-278-5303 or [email protected] for further assistance.
Check carefully to make sure there are no missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this
manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
D(x1)
Lower Pole
E(x1)
Upper Pole
F(x1)
Pole Cap
G(x1)
Foam Pad
H (x1)
Support Plate
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

3
ASSEMBLY STEPS
STEP 1
TOOLS NEEDED
Phillips
Screwdriver
22 lbs
Per Arm
(10 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Remove protective film from Foam Pad (G) and apply the Support Plate (H). Attach Support Plate (H)
to Lower Pole (D) using M6x16mm Screws (S-B) and 4mm Allen Wrench (T-A).
G
H
D
S-B
T-A
STEP 2
Attach Pole Assembly to Base (C) using M6x10mm Screws (S-A), M6 Washers (S-C), and 4mm Allen
Wrench (T-A).
C
S-A
S-C
T-A

4
STEP 4
STEP 3
Remove protective film from Feet (J) and apply to the bottom of Base (C). Remove protective film from
Felt Pads (K) and apply them to the bottom of Feet (J).
J
C
K
Slide Plastic Cover (I), Pole Cable Clip (L), and Tilt Joint (B) onto Lower Pole (D). Use 6mm Allen Wrench
(T-B) to lock the position of Tilt Joint (B).
I
L
B
D
T-B

5
STEP 5
STEP 6
Press Pole Cap (F) into Upper Pole (E) on the side without internal threading. Thread Upper Pole (E)
onto Lower Pole (D).
F
E
D
Slide Pole Cable Clip (L) and Tilt Joint (B) onto Lower Pole (D). Use 6mm Allen Wrench (T-B) to lock the
position of Tilt Joint (B).
L
B
D
T-B

6
STEP 8
STEP 7
OPTION A: Flat Back Monitor
Attach VESA Plate (A) to the
monitors with Screws
(M-A,M-C) and M5
Washers (M-E).
OPTION B: Curved Back Monitor
Attach VESA Plate (A) to the
monitors with Screws (M-B,M-D),
M5 Washers (M-E), and
Spacers (M-F).
Slide VESA Plates (A) with monitors onto Tilt Joints (B), and secure using Thumbscrews (S-D).
A
BS-D

7
STEP 9
STEP 10
Adjust the tilt in Tilt Joints (B) using 6mm Allen Wrench (T-B).
B
T-B
Route cables through Cable Clips (L). Adjust monitors
as desired and Store Allen Wrenches (T-A,T-B) in
Cable Clips (L).
T-A
T-B
L

LAST UPDATED: 07/05/2023
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303