Vivo STAND TV00J User manual

Tabletop TV Stand
Instruction Manual
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-Model: STAND TV00J
Scan the QR code with your mobile device or follow the link to
helpful videos and specifications related to this product.
- -https://vivo us.com/products/stand tv00j
Tools Re uired:
phillips screwdriver
Package Contents
A (x1)
TV Plate
B (x2)
Monitor Bracket
C (x1)
Tempered Glass
D (x1)
Support Column
E (x1)
Plastic Socket
F (x1)
Metal Pad
G (x4)
M6x10 Bolt
H (x4)
Metal Washer
I (x3)
M8x22 Bolt
J (x2)
Wire Clip
K (x4)
Rubber Foot
L (x4)
M4x12 Bolt
M(x4)
M4x30 Bolt
N (x4)
M6x20 Bolt
O (x4)
M6x35 Bolt
P (x4)
M8x20 Bolt
Q (x4)
M8x35 Bolt
R (x4)
M4 Washer
S (x4)
M6 Washer
T (x4)
M8 Washer
U (x4)
M4 Spacer
V (x8)
M6/M8 Spacer
W (x1)
Allen Key
X (x1)
Security Wire Kit
1

Assembly Steps
Step 1
Attach support column (D) to tempered glass (C) with plastic
socket (E) in between and metal pad (F) underneath. Use bolt
(I) to secure assembly. Tighten using allen key (W).
Stick rubber feet (K) to bottom of tempered glass (C).
Step 3
TV plate (A) can
be installed on
wall. Wall
mounting
hardware not
included.
Mount monitor brackets (B) to the back of your TV using bolts
(L, M, N, O, P, Q) and washers (R, S, T) according to the size of
mounting holes on your television. Make sure monitor brackets
are both in the correct orientation. For curved monitors,
spacers (U, V) may be required.
Step 2
Attach TV plate (A) to support column (D) at desired height
using bolts (G) and metal washers (H). Attach wire clips (J) to
back of support column (D).
Optional:
2

Step 4
Route cables through cable management clips (J) on back of
stand.
Mount monitor to TV plate (A) as shown in diagram. Tighten
safety bolts on bottom of monitor brackets (B) using phillips
head screwdriver.
Wood Stud Wall
If your TV is located near a wall as shown in Diagram a, then a
steel wire from security wire kit (X) can be attached for added
security. Attach the two ends of the steel wire to the top two
holes on the back of your TV as shown in Diagram b. Attach
the center loop to your wall according to wall type as shown in
Diagram c, d, e.
Step 5: OPTION A
5a
5c
5b
Wood Wall
Drill 1.7 " (4 mm) deep
holes using a /32" (or
3.8mm) drill bit. Secure with
screws and washers.
3

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
Safety Warning
Contact us at:
Last updated: 4/24/2018
Concrete Wall
Step 5: OPTION B
5d
Drill 2" ( 0mm) deep holes using a /16" (or 8mm) drill bit, and press
anchors into holes. Secure with screws and washers.
5e
4