Vivo MOUNT-VW04G User manual

Gas Spring TV Wall Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-vw04g
[email protected]om www.vivo-us.com 1-800-371-5654
SKU: MOUNT-VW04G

2 3
ASSEMBLY STEPS
STEP 1
Remove plastic covers from part (A) arm.
PACKAGE CONTENTS
WARNING!
B(x2)
Cover
M-F (x4)
D5 Washer
M-G x4)
D8 Washer
M-H (x8)
Small
Spacer
W-A (x6)
Bolt
M-E (x4)
M8x50
M-A (x4)
M5x14
M-B (x4)
M6x14
M-C (x4)
M8x20
M-D (x4)
M6x30
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
W-C (x6)
Washer
W-B (x6)
Anchor
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO
MOUNT. We include mounting for brick and concrete walls. If unsure, please contact us at vivo-us.
com, email at [e-mail], or call us at 1-800-371-5654.
F (x1)
Allen Wrench
G(x1)
Allen Wrench
I(x1)
Level
M-I (x8)
Big
Spacer
A (x1)
Mount
C(x8)
Bolt
D(x2)
VESA Adapter
E(x2)
VESA Adapter
H(x1)
Wrench
STEP 2
OPTION A: Wood Wall
Use a pencil to mark drilling locations for wood beam, and drill 2.2” deep holes using 3/16” bit. Use
of a stud finder is recommended. Mount part (A) arm to wall using (W-A) screws. Do not use (W-B)
anchors for wood beam installation.
TOOLS NEEDED
Phillips
Screwdriver
Drill Pencil
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
5.5 - 44lbs
(2.5 -20kg)
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

4 5
STEP 2 (Continued) STEP 4
For VESA (B) 300x300 and 400x400, attach (C) and (D) extensions in X pattern with (F) bolts.
STEP 3
Reattach plastic covers.
OPTION B: Concrete/Brick Wall
For concrete or brick wall installation, use a pencil to mark drilling locations, and drill 2.4” deep holes
using a 3/8” bit. Mount part (A) arm to wall using (W-A) screws and (W-B) anchors.
For VESA (B) 400x200,attach (C) and (D) extensions in horizontal pattern with (F) bolts.
STEP 5
Attach VESA mount to TV using appropriate bolts and washers.

6 7
STEP 5 (Continued) STEP 7
Using part (G) Allen wrench, turn gas spring adjustment screw until gas spring provides perfect
counter-balance for the TV. If the joint makes a popping sound while raising or lowering, tighten the
socket set screw using large flat blade screwdriver.
Attach VESA mount to TV using appropriate bolts, washers, and spacers.
STEP 6
Make sure there is 4mm of space between top
wing nuts and VESA plate. Hang TV on arm, and
secure with part (E) wing nuts. Tighten with part
(H) wrench.
STEP 8
Manage cables with the built in cable management system.
STEP 9
Adjust tilt joint using part (G) Allen wrench. Position the TV for optimal viewing.
H
G

Last Updated: 01/08/2019
If any parts are received damaged or defective, please contact us. We are happy to
replace parts to ensure you have a fully functioning product.
For more VIVO products, check out our website at:
www.vivo-us.com.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected]om www.vivo-us.com 1-800-371-5654