Vivo STAND-TV07W User manual

Black Mobile TV Cart
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-tv07w
SKU: STAND-TV07W
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A (x1)
Base
B(x2)
Feet
C(x1)
Center Pole
K (x8)
M5 Lock Nut
L x5)
M6x60mm
Carriage Bolt
M(x5)
D6 Washer
N (x5)
M6 Lock Nut
J(x8)
M5x10mm
Bolt
G (x2)
VESA
Adapter
H (x2)
VESA
Adapter
I (x1)
Plastic Cover
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
P (x4)
M6x12mm
Bolt
O(x1)
M6 Flange Nut
Q x1)
4mm Allen
Wrench
M-F (x4)
D8 Washer
M-G (x8)
Spacer
M-E (x4)
D5 Washer
M-A (x4)
M4x14
M-B (x4)
M5x14
M-D (x4)
M8x20
M-C (x4)
M6x14
R x1)
Wrench
D (x1)
VESA Plate
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV CART.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
E (x2)
Wheel
F (x2)
Wheel
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

3
ASSEMBLY STEPS
STEP 1
Attach base (A) to feet (B) using x4 M6x60mm carriage bolts (L), x4 D6 washers (M), and x4 M6 lock nuts
(N). Tighten using provided wrench (R). Screw on wheels (E,F) to the bottom of the feet.
TOOLS NEEDED
44lbs
(19.96kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
AB
L
M
N
R
E
F
R
F
E
F
NOTE: You will need an adjustable wrench or a 17mm (11/16”) wrench to tighten
the wheels. Wrench included will not work.
Wrench

4
STEP 2
Remove the two bolts, four washers, and two
nuts from the center pole (C) using the Allen
wrench (Q) and the wrench (R).
STEP 3
Slide the plastic cover (I) over the pole
(C).
O
P
I
Separate the two halves.
Slide the top half of the pole back into the bottom
half and secure using the hardware you removed
in step 2.

5
STEP 5
OPTION A: VESA Plate Only
Use (M-A or M-B) bolts along with (M-E) washers to attach
the VESA plate (G. H) without the adapters to the TV
monitor.
STEP 4
Attach the center pole (C) to the base (A) using x1 carriage bolt (L), D6 washer (M), and M6 lock nut
(N) through the front of the base. Use the x4 M6x12mm bolts (P) to secure the top. Tighten using Allen
wrench (Q) and wrench (R).
M-A/M- B
M- E
TV
TV
TV
P
Q
L
M
N
R

6
STEP 5 (continued)
OPTION B: VESA Plate with Adapters
For TVs with VESA mounts at 200mm x 200mm or 200mm x 100mm, VESA adapters (G, H) are required.
Attach adapters to VESA plate using x8 M5x10mm bolts (J) and x8 M5 lock nuts (K). Tighten using
wrench (R) and a Phillips screwdriver.
OPTION B: VESA Plate with Adapters (Continued)
Then, use bolts (M-A-M-D) along with washers (M-E,
M-F) to secure VESA plate with the adapters to the
back of your television. Make sure the “VIVO” logo is
right side up. For a curved television, spacer (M-G)
may be required. M-A/M-B/M-C/M- D
M-E/M- F
TV
TV
TVTV
M- D
M- F
M- G
M- D
M- F
M- G
M- G
OR
H
H
K
J
G
G
R
G
G
H
H
J
K
R

7
STEP 6
Adjust as Desired
To attach the TV to the stand, loosen the nut at the top of the VESA plate and slide into the slot on top
of mounting plate on the pole. Secure the top and bottom of the VESA plate to the stand by tightening
both nuts (O) using wrench (R).
O
R
R
0°
+30 °
-3 ° +3 °

LAST UPDATED: 11/30/2020
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303