Vivo STAND-TV00T User manual

Tabletop TV Stand
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-tv00t
[email protected]om www.vivo-us.com 1-800-371-5654
SKU: STAND-TV00T

2
PACKAGE CONTENTS
TOOLS NEEDED
70lbs
(31.75kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
K (x4)
M8x35
C(x4)
M4 Washer
J (x4)
M8x20
F (x4)
M4x12
G (x4)
M4x30
H (x4)
M6x20
I (x4)
M6x35
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE MAY NOT BE USED
a4 (x1)
TV Bracket1
D(x4)
M6 Washer
a3 (x1)
Plastic Cover
a1 (x1)
Base Plate
b1 (x1)
Base Plate
E (x4)
M8 Washer
A (x4)
M4 Spacer
B(x8)
5mm M6/8
Spacer
f(x1)
Allen Key
e(x4)
M6 Nut2
d(x4)
M6 Nut1
c(x8)
M6x10
b2 (x1)
Junction Plate
a2 (x1)
Junction Plate
b3 (x1)
Plastic Cover
b4 (x1)
TV Bracket1
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
a5 (x1)
TV Bracket2
b5 (x1)
TV Bracket2
g (x1)
Wrench
M (x2)
So Pad
L (x4)
M8x45
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

3
ASSEMBLY STEPS
STEP 1
Connect Base Plate (a1,b1) to Junction Plate
(a2,b2) using M6x10 bolts (c) as shown in
diagram. Use Allen key (f) to tighten bolts.
Add so pad (M).
STEP 2
Connect the lower TV brackets (a4,b4) to the
upper TV brackets (a5,b5) using M6 nuts (e).
Use wrench (g) to tighten.
NOTE: This step can be skipped for smaller TVs
that do not require the height of the upper TV
brackets.
STEP 3
Attach TV brackets to junction
plates using M6x10 bolts (c) and
M6 cap nuts (d). Secure using
Allen key and wrench (f,g).
Attach plastic covers (a3,b3) to
junction plates by pressing tabs
into holes.
STEP 4
Attach assembled brackets to
back of TV using bolts (F-L)
and washers (C-E) according to
mounting holes in TV. If bolts
are too long, spacers (A, B) may
be required.
a1 & b1
Soft Pad
a2
b2
a1
b1
M6x10 Bolt
Allen Head
Allen Key
b4
b5
a4
a5
M6 Nut2
Wrench
M6x10 Bolt
Allen Head
b4 a4
Wrench
Allen Key
b3
b2
a2
M6 Nut1
A,B,C
(if necessary)
G to N
D to F
F-L
A, B
C-E

Last Updated: 07/02/2019
If any parts are received damaged or defective, please contact us. We are happy to
replace parts to ensure you have a fully functioning product.
For more VIVO products, check out our website at:
www.vivo-us.com.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected]om www.vivo-us.com 1-800-371-5654