Vivo STAND-TV47SL User manual

T Tableto Swivel Stand
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-Model STAN T47SL
Tool Required
phillips screwdriver
Packa e Content
1
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
- -htt//vivo u.com/roduct/tand tv47l
A1 (x4)
Pad
A2 (x3)
Plastic Washer
A3 (x3)
D6.7x17 Washer
A4 (x3)
M6x20
A (x2)
M6x16
A6 (x2)
D8. x16
A7 (x2)
M8x 0
A8 (x2)
M8 Nut
A9 (x4)
D6.4x16
A10 (x4)
M6x12
A11 (x4)
M2x6
A12 (x1)
Allen Key
A13 (x1)
Wrench
A14 (x2)
Cable Clip
M-A (x4)
M x14
M-B (x4)
M6x14
M-C (x4)
M6x30
M-D (x4)
M8x30
M-E (x4)
M8x 0
M-F (x4)
Washer
M-G (x4)
Spacer
M-H (x4)
Spacer
B1 (x1)
Base
B2 (x1)
Pole
B3 (x1)
TV Plate
B4 (x2)
End Covers
B (x2)
VESA Brackets
B6 (x1)
Base Cover
B7 (x1)
Swivel Base

Aembl& Ste
2
Ste 1
Apply pads (A1) to
bottom of glass
base (B1).
Ste 2
Snap plastic base cover (B6) into bottom of pole (B2).
Ste 3
Mount swivel base
(B7) to bottom of pole
using screws (A ).
Ste 4
Mount pole to glass
base using screws
(A4), metal washers
(A3), and plastic
washers (A2).
Ste 5
Remove two screws from the back of the mounting bracket, adjust
the mounting bracket to desired height on pole, and secure with
removed screws. Assemble screws (A7), washers (A6), and nuts (A8)
to pole and mounting bracket.
Ste 6
Assemble end covers (B4) to
TV plate (B3) using screws
(A11).
Ste 7
Assemble TV plate to
mounting bracket with
screws (A10) and washers
(A9).

Ste 9
Hang TV over TV mounting plate.
Ste 10
Ensure that locks are snapped in place and secure.
Ste 8
Mount VESA brackets (B ) to back of TV with appropriate screws (M-
A, M-B, M-C, M-D) and hardware (M-F, M-G, M-H).
3

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
Safet& Warnin
Contact u at
Last updated: 0 /18/18
Ste 11
Attach cable management clips (A14) to back of pole
Ste 12
Manage cables and
adjust the tilt angle
of the TV.
4