vollara FRESH AIR MOBILE User manual

MOBILE
ANYWHERE, EVERYWHERE
Portable Electronic Purier
READ MANUAL CAREFULLY FOR PROPER PROCEDURES AND OPERATION.
2017 Space Technology
Hall of Fame Inductee

Specifications ........................... 2
Important Safety Instructions............. 3
Parts and Accessories.................... 4
Control Pad Layout ...................... 4
Operation............................... 5
Mounting the Base....................... 5
Adjusting the Wire Stand ................. 6
Wire Stand Positions ..................... 6
12VDC Adapter Fuse ..................... 6
Power Adapters ......................... 7
Portability............................... 7
Cleaning ................................ 10
Troubleshooting ......................... 10
Warraty................................. 11
CONTENT
FILL IN & SAVE
Vollara, LLC • 1300 Valley Drive • Bristol, VA 24201 • 800.989.2299 • www.Vollara.com
Please record the name and phone number of your Vollara Independent Business Owner:
Name:
Phone:
Please record the serial number of your FreshAir Mobile:
Serial #:
Did you forget to register your FreshAir Mobile?
By registering, you’ll activate your warranty. Your privacy is guaranteed. Just fill out your warranty
card and drop it in the mail or sign up online.
GENERAL INFORMATION
Congratulations, you have purchased one of the most effective, technologically advanced mobile air
purifier available.Your FreshAir Mobile is designed to provide clean, healthy air for your car, truck, RV,
or camper by reducing airborne contaminants, odors and pollutants. Be sure to read and follow all
service procedures outlined in this owner’s manual.
SPECIFICATIONS
FreshAir Mobile
• 9940059 Model: A1018B
Technology:
• ActivePure® Technology
Electrical:
• 12VDC or 110 - 240 VAC 50/60Hz
• Fuse (12V DC adapter only): 2 Amp
Buss type
• Maximum 10.7 Watts
Mechanical:
• 3 Speed Fan
Operating Temperature:
• 45˚F - 100˚F (7˚C - 38˚C)
Dimensions:
• 3.625” x 6” x 1.0”
(9.21cm x 15.25cm x 2.54cm w/o base)
Weight:
• 8 ounces (.23kg)
Warranty:
• Limited (1) year

3
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING:
CAUTION:
Read this manual in its entirety before using your FreshAir Mobile.
• Disconnect power cord before servicing
• DO NOT immerse in water or other liquids
• DO NOT touch the control panel or plug with a wet hand
• DO NOT insert or allow foreign objects to enter any ventilation or exhaust opening as this
may cause an electric shock or fire, or damage the air cleaner
• To prevent a possible fire, DO NOT block the air intakes or exhaust in any manner; DO NOT
use on soft surfaces, where openings may become blocked
• To disconnect air cleaner, turn controls to OFF, then remove plug from outlet; pull firmly on
the plug, DO NOT unplug by pulling on the cord
• Always unplug the unit before moving or cleaning, or whenever the air cleaner is not in use
• DO NOT use outdoors or on wet surfaces
• DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit,
doing so will void your warranty
• Connect to properly grounded outlets only
• To reduce the risk of electrical shock, do not change the plug in any way
• UV Lamp operation. Do not operate this unit unless the case is completely and
correctly assembled. Failure to comply may result in serious eye damage.
• Do not operate unit near heat sources, open flame, or combustible vapors or gases.
• The unit must be disconnected from its power source before servicing, and
should not have the power reconnected unless the case is correctly and
completely reassembled.
• Use O3Boost in accordance with directions found in this manual only.
• Not for use on 12 volt positive ground or 24 volt vehicles. Doing so may damage
the product

4
PARTS AND ACCESSORIES
A. WIRE STAND ........................................................................9950153
B. BASE ...............................................................................9950154
C. KNOB/CLAMP PACK (2) ..............................................................9950155
D. 12VDC ADAPTER ....................................................................9950157
E. 2.0 AMP FUSE .......................................................................9950162
F. AC ADAPTER ........................................................................9950158
C
C
C
C
A
B
D
E
A. WIRE STAND 9950153
B. BASE 9950154
C. KNOB/CLAMP PACK (2) 9950155
D. 12VDC ADAPTER 9950157
E. 2.0 AMP FUSE 9950162
F. AC ADAPTER 9950158
Fuse for 12VDC Adapter only
L
O
C
K
O
P
E
N
L
O
C
K
O
P
E
N
PUSH
F
TARGET FRAME
ACTIVEPURE
®
TARGET
UV BULB
ORDER PART# 9950209
FRESH AIR MOBILE SERVICE KIT
C
C
C
C
A
B
D
E
A. WIRE STAND 9950153
B. BASE 9950154
C. KNOB/CLAMP PACK (2) 9950155
D. 12VDC ADAPTER 9950157
E. 2.0 AMP FUSE 9950162
F. AC ADAPTER 9950158
Fuse for 12VDC Adapter only
L
O
C
K
O
P
E
N
L
O
C
K
O
P
E
N
PUSH
F
ORDER PART# 9950159
FRESH AIR MOBILE SERVICE KIT
ACTIVEPURE
®
TARGET
TARGET FRAME
Red Wires
UV BULB
ACTIVEPURE
®
PLATE
C
C
C
C
A
B
D
E
A. WIRE STAND 9950153
B. BASE 9950154
C. KNOB/CLAMP PACK (2) 9950155
D. 12VDC ADAPTER 9950157
E. 2.0 AMP FUSE 9950162
F. AC ADAPTER 9950158
Fuse for 12VDC Adapter only
L
O
C
K
O
P
E
N
L
O
C
K
O
P
E
N
PUSH
F
ORDER PART# 9950159
FRESH AIR MOBILE SERVICE KIT
ACTIVEPURE
®
TARGET
TARGET FRAME
Red Wires
UV BULB
ACTIVEPURE
®
PLATE
C
C
C
C
A
B
D
E
A. WIRE STAND 9950153
B. BASE 9950154
C. KNOB/CLAMP PACK (2) 9950155
D. 12VDC ADAPTER 9950157
E. 2.0 AMP FUSE 9950162
F. AC ADAPTER 9950158
Fuse for 12VDC Adapter only
L
O
C
K
O
P
E
N
L
O
C
K
O
P
E
N
PUSH
F
ORDER PART# 9950159
FRESH AIR MOBILE SERVICE KIT
ACTIVEPURE
®
TARGET
TARGET FRAME
Red Wires
UV BULB
ACTIVEPURE
®
PLATE
PURIFIER
O
3
BOOST
CONTROL PAD LAYOUT
LOW LOWHIGH HIGH
MED MED

5
LEDs
• Peel and stick one
part of the Velcro
to the base, then
attach the other
to a clean, dry
surface, or...
• Attach suction
cups by pressing
and twisting into
the base, or...
• Screws may be
used for extra
security and
where the other
methods are not
appropriate.
Setting Coverage
Low: Compact Car, Pickup
Med: Large Sedan, SUV, or Semi-Cab
High: RV/Motor Home or Houseboat
OFF: Purifier o: ionization & fan may continue operating if desired.
OPERATION
MOUNTING THE BASE
1. If desired, mount the base in an appropriate location (see below).
2. Adjust the wire stand (see page 5).
3. Plug in either the 12VDC car adapter or the AC adapter.
4.The FreshAir Mobile unit will come on when power is supplied to the unit.
5. Adjust the Purifier by pressing the Purifier UP and Purifier DOWN buttons. When the unit is
off, all the LED lights will also be off.
6. Set the O3Boost by pressing the O3Boost UP and O3Boost DOWN buttons. See the Settings
chart (below) for proper adjustments. When the O3Boost is set to off, the LEDs will also be
off; the Purifier LED(s) will remain on. DO NOT EXCEED RECOMMENDED SETTINGS.
• When running continuously for extended periods of time, it may be necessary to
clean the unit more frequently than normal. Remove any dust from the outside
as well as the inside the unit to maintain optimal performance. A lack of cleaning
/ maintenance may lead to product performance or life issues.
• DO NOT place unit where it may be exposed to temperatures above 100°F as
doing so may cause the plastic to deform.
The base for the FreshAir Mobile can be mounted using the included suction cups, Velcro, or
screws, depending on preference. When using suction cups or Velcro, be sure the surface is
smooth and clean. Dirt, grease, protectants, and other substances will affect performance
and holding ability.
CAUTION:

6
• Sitting on a flat
surface with or
without the base
• Hanging over an
edge pointing down
(laundry hamper,
garbage can, etc.)
• Sitting on a flat surface
without the base
• On a vertical surface
with the base (wall
mount, window, etc.)
• Hanging over an edge
pointing up (seat pocket
in car)
ADJUSTING THE WIRE STAND
The wire stand on the FreshAir Mobile allows for quick release from the base, provides a stand or
hanger for the unit independent of the base, and allows the unit to either stand or hang from the
base depending on how the base is mounted.
To adjust the wire stand, loosen the two knobs on the sides of the unit approximately 1/2 turn. The
unit may then be tilted up or down to adjust the angle or moved on the wire stand to change the
height. You can also remove and change the position of the wire stand to accommodate several
different mounting methods. To reinstall, simply align the two clamp collars and insert the wire
stand. Once the unit is adjusted, tighten both knobs to hold it in place.
WIRE STAND POSITIONS
ORTHEN
NOTE: Unit can be used without attaching the base or wire stand.
EFFECTS OF HIGH OR LOW VOLTAGES ON FRESHAIR MOBILE™
WHEN USING THE 12VDC CAR ADAPTER
FreshAir Mobile™ has an operating voltage range of 11 VDC to 14.6 VDC. If the voltage coming
into the unit is too high, the unit may blow the 12VDC adapter fuse. This type of problem usually
indicates something is wrong with a vehicle’s electrical system. If the unit shuts down while using
the 12VDC automotive adapter and you are unsure of the cause, check the adapter fuse. If the fuse
is not blown, test the unit using the supplied AC adapter. Once the voltage problem (drained car
battery, electrical system problem, etc.) is corrected by a qualified service person, you will be able
to resume using your FreshAir Mobile™ with the 12VDC adapter.

7
• Insert the car adapter into an
appropriate 12 volt automotive
type power outlet.
• Insert the small adapter plug into the opening located
underneath at the rear of the unit.
• Select and install the proper
international plug into the
AC adapter. Insert correctly
assembled adapter into a
standard electrical outlet.
THEN
NOTE: when installing one of the
interchangeable plugs, be sure to
twist and lock it into place. When
removing a plug, press the raised
tab to release, then turn the plug
out the top.
PUSH
L
O
C
K
O
P
E
N
L
O
C
K
O
P
E
N
PRESS HERE
• To remove the unit from an
attached base, press down
on the front latch and slide
the unit back, then up.
NOTE: If you prefer to remove the base and unit together, mount the base with Velcro or
suction cups to a clean, dry surface.
NOTE: For proper operation using the 12 volt car adapter, make sure the the fit in the power
outlet is snug. A loose fit may can issues in unit operation or blown fuses.
• Once the unit is assembled and
the base mounted, simply snap
the wire stand into the base.
The latch at the front of the
base should snap into place,
locking in the stand and unit.
PRESSSLIDE THEN LIFT
• For added convenience,
mount extra bases where
you use your FreshAir Mobile
most. See your Vollara
Independent Business
Owner for more information.
POWER ADAPTERS
PORTABILITY
Depending on how it is mounted, your FreshAir Mobile can be ready to take with you in just a
few seconds.
To change the car adapter fuse, unscrew and remove the front
of the adapter. Replace with the same type and rating only:
2 amp Buss type fuse (service part #9950162).
OR
12VDC Adapter Fuse
CAUTION: Not for use on 12 volt positive ground or 24 volt vehicles. Doing so may damage
the product.
FreshAir Mobile comes with both a 12 volt DC car adapter and a 100 - 240 volt 50/60 Hz AC
adapter with interchangeable plugs.

8
CLEANING
TROUBLESHOOTING
If your unit fails to operate properly after performing troubleshooting, contact your
Vollara Independent Business Owner for further assistance. You may also contact
Vollara at 800.989.2299, or visit www.Vollara.com for additional support.
Unit does not operate/the O3Boost does not
operate/all LEDs off
• Unplug and reinsert the adapter plug and
adapter to check where the power supply is
plugged in to be sure it has power.
• If using the 12VDC car adapter, remove the
fuse by unscrewing the end of the adapter
and check to see if it is blown. Replace it
with the same type and rating fuse only (see
Specifications). If the fuse is not blown, check
the outlet for proper voltage.
UV bulb or O
3
Boost may not be working
• Press the PURIFIER UP or PURIFIER DOWN
buttons to turn the Purifier function ON.
• If checking O3Boost operation, press the
O3Boost UP button to turn the O3Boost ON.
• Remove the Bulb Assembly, clean, and reinstall
(see Disassembly and Cleaning).
• If cleaning and reinstalling does not correct
the problem, replace the Bulb Assembly
(service kit #9950209).
• When looking through the rear inlet vents in
low light you should see a slight bluish glow.
If there is no glow, replace the Bulb Assembly
(service kit #9950209).
Lack of air flow
• Make sure the intake vents are not blocked
and the front of the unit is clear.
• Check to see if the fan is operating (if not,
see above).
NOTE: See Maintenance Instruction Sheet for detail views of components.
WARNING: Under no circumstances should your FreshAir Mobile unit be operated
while any part of the case is damaged, missing, or disassembled. If the case
is damaged, return your unit to Vollara for repair or replacement. Direct
exposure to the internal UV light may cause eye damage.
CAUTION: The unit must be disconnected from its power source before servicing, and
should not have the power reconnected unless the case is correctly and
completely reassembled.
Depending on conditions, your FreshAir Mobile will require periodic cleaning of certain
internal components every one to three months.
ActivePure® Target - Clean the target by gently removing dust with a small, soft brush.
UV Bulb - The UV bulb should be gently wiped with a soft, dry cloth. Avoid handling the UV bulb more
than necessary.
ActivePure® Ozone Plate - The top area of the ActivePure® Purification Plate can be cleaned
with ammonia or alcohol and a cotton swab. Do not use water. Allow to dry thoroughly.
Case - Clean the exterior case of your FreshAir Mobile with a soft cloth dampened (not wet)
with water. Do not use harsh chemicals or solvents.
Fan/Interior of unit - The interior and fan may be cleared of dust using canned air suitable
for electronics.

WARRANTY INFORMATION
LIMITED 1 YEAR WARRANTY
Customer should not repackage and ship the FreshAir Mobile
unit due to possibility of irreparable damage. For warranty
service, please contact your Vollara Independent Business
Owner or call Customer Service at 800.989.2299.
WHAT IS COVERED BY THIS WARRANTY
We warrant the FreshAir Mobile to the consumer, subject
to the conditions below, against defects in workmanship
or material, provided that the products are returned to a
service location within the following time periods:
• FreshAir Mobile within one (1) year of date of purchase.
INSTALLATION AND MAINTENANCE
REQUIREMENTS
This warranty is expressly conditioned upon proper
installation, operation, cleaning and maintenance, all in
accordance with the User’s Manual. Failure to meet any
of these requirements will void this warranty. Servicing of
your FreshAir Mobile by parties other than our authorized
representative and/or using parts other than genuine parts
will also void this warranty.
HOW TO OBTAIN WARRANTY SERVICE
Customer must contact Vollara Customer Service or
their Independent Business Owner and provide proof of
purchase within the above time period. We will repair or
replace and return the product, without charge and within
a reasonable period of time, subject to the conditions in
the above paragraphs, if its examination shall disclose
any part to be defective in workmanship or material. If we,
in our discretion, are unable to repair the product after a
reasonable number of attempts, we will provide either a
refund of the purchase price or a replacement unit, at the
company’s option.
WHAT IS NOT COVERED BY THIS WARRANTY
This product is intended for household use only. Ordinary
wear and tear shall not be considered a defect in
workmanship or material. These warranties do not apply
to filters nor for loss or damage caused by accident,
fire, abuse, misuse, improper installation, modification,
misapplication, commercial use, or by any repairs other
than those provided by our authorized Service Center.
MISSING SERIAL NUMBERS AND
UNAUTHORIZED CHANNELS
If a valid serial number is missing from the product, the
warranty will be voided. Vollara products are authorized
for sale through Vollara Independent Business Owners
only. Warranties are voided if a product is purchased
through unauthorized channels, this includes websites
that are not authorized to use Vollara’s trademarked
names, images and logos as well as Internet auction sites
(e.g. ebay and Craigslist). The only approved Internet
presence for Vollara products is www.vollara.com. To
confirm warranty coverage prior to purchasing a product,
contact Vollara at 800.989.2299 with the serial number
located on the back of the unit.
EXCLUSION OF OTHER WARRANTIES
AND CONDITIONS
EXCEPT AS PROVIDED HEREIN, WE MAKE NO
REPRESENTATION OR WARRANTY OF ANY KIND.
ALL OTHER WARRANTIES OF ANY KIND, EXPRESS
OR IMPLIED, ARE HEREBY EXPRESSLY DISCLAIMED,
INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
LIMITATION OF LIABILITY FOR SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES
WE SHALL NOT IN ANY CASE BE LIABLE FOR SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING FROM BREACH OF EXPRESSED OR IMPLIED
WARRANTIES, CONDITIONS, GUARANTEES OR
REPRESENTATIONS, BREACH OF CONTRACT,
NEGLIGENCE OR ANY OTHER LEGAL THEORY. Such
excluded damages include, but are not limited to, loss of
profits or revenue, and loss of the use of the products.
FOR U.S. APPLICATION ONLY
This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
Some states do not allow limitations on warranties, or on
remedies for breach. In such states, the above limitations
may not apply to you.
This warranty is provided by
Vollara, LLC
1300 Valley Drive
Bristol, VA 24201.
SERVICE
Every eort is made to ensure customers receive an up-
to-date instructions manual on the use of our products;
however, from time to time, modifications to our prod-
ucts may without notice make the information contained
herein subject to alteration. For the latest information,
please visit www.vollara.com.
9

10

11

FCC DECLARATION OF CONFORMITY
Name: FreshAir Mobile Model: A1018B
Manufacturer: Vollara
This device complies with Part 15 of the
FCC Rules.
RESPONSIBLE PARTY
Vollara, LLC
1300 Valley Drive
Bristol, VA 24201
Ph: 800.989.2299
Signature: __________________________________
Printed Name: Andy Eide
Title: Vice President, Product Development
and Research
Date: 03/16/2021
FAM_OM_65-00817_VA-01561B_0521
© 2021 Vollara, LLC. All Rights Reserved.
For information regarding the use of this product please call Customer Service.
800.989.2299
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television,
which can be determined by turning the equipment
o and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment
and receiver
Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is connected
Consult the Dealer or an experienced radio/TV
technician for help
Vollara, LLC | 1300 Valley Drive | Bristol, VA 24201 | 800.989.2299 | www.vollara.com