Volt Top Dog Innovator VPL-398 User manual

INSTALLATION INSTRUCTIONS
VOLT®LOW VOLTAGE LANDSCAPE LIGHTING
VOLT® Top Dog Innovator Mini Path Light
ITEM: VPL-398
1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

VOLT®Mini Dog Innovator Mini Path Light- VPL-398
INSTALLATION INSTRUCTIONS
IMPORTANT: PLEASE READ BEFORE INSTALLATION
!
IMPORTANT SAFETY INSTRUCTIONS
!
813.978.3700 • [email protected] • www.voltlighting.com
2
This luminaire is intended for installation in accordance with local codes and the
National Electric Code (NEC). Failure to adhere to these codes and instructions may
result in serious injury, property damage and void the warranty.
These instructions do not intend to cover all variations in installation, operation
maintenance or mounting situation.
1. Make sure that the power is turned OFF before installing or servicing this
luminaire.
2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M) or more
from pool, spa or fountain.
3. This luminaire is intended to be used only with a power supply (transformer) rated
maximum of 300 watts (25 AMPS) at 15 volts.
4. Wiring connections must be made with wire connectors that is suitable for
outdoor use.
5. Position the low voltage wire and wire connector so that it is located within 6
inches (15.2 cm) from a building structure, a luminaire or tting.
6. The main low voltage cable is intended for shallow burial - less than 6 inches (152
mm)
7. If additional lengths of low voltage cable is required, please contact www.
voltlighting.com or call 1-813-978-3700.inches (152 mm)
8. If additional lengths of low voltage cable is required, please contact www.
voltlighting.com or call 1-813-978-3700.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS
Lighted lamp is HOT!
WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.
1. Turn off/unplug and allow to cool before replacing lamp.
2. Lamp gets HOT quickly! Contact only switch/plug when turning on.
3. Do not touch the hot lens, guard or enclosure.
4. Keep lamp away from materials that may burn.
5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may damage lamp.
6. Do not operate the luminaire tting with a missing or damage shield.
SAVE THESE INSTRUCTIONS

PACKAGE CONTENTS
PRODUCT DIMENSIONS
INSTALL STAKE
1
A. (1) Fixture Body
Determine the desired location
for mounting the stake mount.
Hammer the stake into the
ground until ange of stake is
ush to grade. To avoid damage
to the stake, place a board on top
of the stake while hammering.
Note: If the ground is hard and
the stake is difcult to install,
make a crosscut in the ground
using a at shovel.
Board
GroundSoil
Stake
813.978.3700 • [email protected] • www.voltlighting.com
3
23”
1.65”
3 1/4”
3.37”- 4.72”
2.94”

INSTALL LAMP
2
3
VOLT® Mini Dog Innovator Mini Path Light- VPL-398
INSTALLATION INSTRUCTIONS
813.978.3700 • [email protected] • www.voltlighting.com
4
Insert the lamp (sold separately), with the
correct wattage and type as marked on
the luminaire label.
CAUTION: Do not exceed maximum watt-
age marked on luminaire label.
NOTE: DO NOT TOUCH halogen lamp with
bare hands. Use soft cloth to handle lamp.
Not for use with the VOLT®LED Bi-Pin
Lamp.
Socket
Lamp
Install Lens
Screw the lens onto the
luminaire and hand tighten until
snug.
Fixture
Lens
4
Install Glare Guard
Place the glare shield over the
inner shield and secure with the
set screw.
Glare
Guard
Set
Screw

5
813.978.3700 • [email protected] • www.voltlighting.com
5
Install Luminaire to Stake
Clear away an area in the
ground at the wireway slot on
top of the stake. Lay the
luminaire pigtail into the
wireway slot and screw the
stem onto the stake.
If the assembly does not look
straight, adjust by pushing or
pulling on the stake only.
Use a bubble level against the
side of the stem to ensure the
stem is perpendicular to the
ground.
Wireway Slot
Pigtail
Stem
Stake

Specications and product details subject to change without notice.
© Copyright 2023, VOLT® Lighting, Lutz FL USA 33549 • All rights reserved.
[email protected] • www.voltlighting.com
1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)