Von Duprin 940L User manual


941291-00
1
940K
940K-NL
940K-BE
1
Exit Device Side of Door Trim Side of Door
1³⁄₈" (35 mm)
1⁹⁄₁₆" (40 mm)
940L-DT
940L-BE
Transfer from device side to trim side of door
940L-NL
940L
Device
Trim Side of Door
1¹⁄₄"
(32 mm)
⁵⁄₈"
(16 mm)
Ø ³⁄₄" (19 mm)
Through Device
3"
(76 mm)
Ø ¹⁄₄" (6 mm)
Through
1¹¹⁄₁₆"
(43 mm)
1¹¹⁄₁₆"
(43 mm)
Metal
Ø 1³⁄₄" (44 mm)
Omit for BE or DT
Optional prep (V only)
to allow installation of
key cylinder without
cylinder collar.
Prepare Door
2
Trim for 94/95 Series Exit Device
940
Installation Instructions
© Allegion 2014
Printed in U.S.A.
941291-00 Rev. 10/14-h
Customer Service
1-877-671-7011 www.allegion.com/us

3If Necessary, Rehand Trim
940L (shown)
940L-BE
940L-NL
RHR
LHR RHR
940L-DT
RHR LHR
RHR
Loosen set screw
a
b
Outside
LHR
LHR
Outside
Peg must sit
between fork of
tailpiece cam

If Necessary, Install Tailpiece
4
To install key cylinder
without cutting out door,
cut locking tab at scribe
line.
a
b
5If Necessary, Install Cylinder
1¹⁄₈ −1¹⁄₄"
(29−32 mm)
a
b
cylinder collar
7Return to Device Instructions
6Set Handing
Return to
Device Instructions
Pan head machine screws
(supplied with control)
Confirm exit device is in the neutral
configuration (shown below).

Reinstall Locking Plate
4Reinstall Back Plate 5
Remove and Discard
NL Spring
Hook
Straight
Attach NL Spring to
Locking Plate
3
Remove Locking Spring
2
1
1Remove Back Plate and Locking Plate
940L Shown
Align with Hole
940L t
940K t
940L-NL
940K-NL
An NL Spring was included
for optional field conversion
to NL function.
NL CONVERSION