Von Duprin 6225 User manual

*931238-00*
931238-00
Electric Strike, Double Door Open Back Mortise or Cylindrical
Application
6225
Installation Instructions
Figure 1
5. Install strike with two #12-24 screws. Make sure clearance
between latch bolt and strike lip is 1/32” (Figure 2). If not,
uninstall strike, adjust (Figure 3), and reinstall.
6. Test door: With strike unlocked, door opens with latch bolt
extended. When door closes, latch bolt rides over strike lip.
89/336/EEC
Notes: Deadbolt will not function with this strike.
Check with factory for applications.
1. For lock or device preparation, see their directions.
2. Prepare door for strike (see other side).
3. Wire strike (Figure 1).
4. Test strike: Apply solenoid power. Fail secure (FSE)
lip unlocks. Fail safe (FS) lip locks.
DC input is
nonpolarized.
NOTE
!
J1
P1
P1 J1A P1A
SO-12 or SO-24
12 VDC
or
24 VDC
12 VAC SO-12 12 VDC
or
24 VAC SO-24 24 VDC
{
{
Wiring
for DC
supply
Wiring
for AC
supply
Solenoid
Use crimp
connectorsto
splice wiring
to P1 leads
Yellow solenoid wires = 12 VDC, 0.57 A
Black solenoid wires = 24 VDC, 0.29 A
(also shown on strike label)
SOLENOID POWER REQUIREMENTS
Figure 2
Top view;
faceplate not
shown for clarity
1/32”
Latch bolt
Strike lip
Figure 3
To adjust strike,
loosen screws A, B,
and Cand move
backboxsidewaysas
necessary
A
B
C
931238 _5931238 _5
931238 _5931238 _5
931238 _5
PREPUBL ICATIO N
REVIEW COP Y REV. A
NOTE:
Static Strength Rating 1500 lb.
Dynamic Strength Rating 70ft.-lb.
Endurance Rating 250,000 c.
© Allegion 2014
Printed in U.S.A.
931238-00 Rev. 01/14-b
Customer Service
1-877-671-7011 www.allegion.com/us

Strike Dimensions and Required Clearances
Door Preparation for Strike
Strike
backbox
assembly
1-7/16” minimum
clearance
Lock and strike CL
C strike
and
latch bolt
L
6” minimum
clearance
5/32”
2-1/16”
1-1/2”
3-3/4”
8-3/8”
1-5/8”
9”
4-3/16”
4-1/2” 12” minimum
clearance
1-7/8”
minimum
clearance
1-3/8”
11/16”
#16 drill and
#12-24tap
2 places Suggested
cutout
Reinforce for strike
attachment as required
LHR shown
RHR opposite
Cdoor
L
C strike
L
RHR door
shown inactive
1-1/8”
2-5/8”