VWR avantor 442-1265 User manual

P/N PENDING
Version 01 Issue 05/2021
Instruction Manual
VWR®Advanced Hotplate-Stirrers
EU cat. no
Hotplate-Stirrers
442-1265
442-1268
442-1270
442-1274
Hotplate
442-1269
Stirrer
442-1273

1 vwr.com I Instruction Manual VWR®Advanced Hotplate-Stirrers
Legal address of Manufacturer:
VWR International bv,
Researchpark Haasrode 2020
Geldenaaksebaan 464
B-3001 Leuven
[phone]
http:be.vwr.com
UK Importer:
VWR International Ltd
Hunter Boulevard, Magna Park
Lutterworth, Leicestershire, LE17 4XN
http://uk.vwr.com
Country of Origin
USA

2 vwr.com I Instruction Manual VWR®Advanced Hotplate-Stirrers
Table of Contents
1. INTRODUCTION...................................................................................................................................................3
1.1. Safety Information.....................................................................................................................................3
1.2. Intended Use.............................................................................................................................................3
1.3. Package Contents.....................................................................................................................................4
1.4. Installation.................................................................................................................................................4
1.5. Overview...................................................................................................................................................5
1.5.1 Specifications............................................................................................................................................5
1.5.2 Device Setup...........................................................................................................................................11
1.5.3 Display (Hotplate-Stirrers) ......................................................................................................................14
1.5.4 Display (Hotplate) ...................................................................................................................................15
1.5.5 Display (Stirrer).......................................................................................................................................16
2. OPERATION.......................................................................................................................................................17
2.1 Getting Ready.........................................................................................................................................17
2.2 Standby Mode.........................................................................................................................................17
2.3 Controlling the Stirrer..............................................................................................................................18
2.4 Controlling the Top Plate Heater ............................................................................................................19
2.5 Using the External Probe........................................................................................................................21
2.6 The Settings Menu..................................................................................................................................22
2.6.1 Accessing / Exiting..................................................................................................................................22
2.6.2 Features..................................................................................................................................................22
2.6.3 Structure & Defaults................................................................................................................................23
2.7 Using the Single Point Calibration Feature.............................................................................................24
2.8 Enabling / Disabling the Beeper .............................................................................................................28
2.9 Changing the Power Recovery Setting...................................................................................................29
2.10 Reset to Factory Default Settings...........................................................................................................30
3. ACCESSORIES ..................................................................................................................................................32
3.1 Round Top Hotplate-Stirrer Accessories................................................................................................33
4. MAINTENANCE..................................................................................................................................................34
4.1 Troubleshooting ......................................................................................................................................34
4.2 Technical Service Information ................................................................................................................35
5. TECHNICAL DETAILS........................................................................................................................................35
6. COMPLIANCE.....................................................................................................................................................36

3 vwr.com I Instruction Manual VWR®Advanced Hotplate-Stirrers
1. INTRODUCTION
This manual contains installation, operation and maintenance instructions for the VWR Advanced Series. Please
read the manual completely before using.
1.1. Safety Information
Safety notes are marked with signal words and warning symbols. These show safety issues and warnings. Ignoring
the safety notes may lead to personal injury, damage to the instrument, malfunctions and false results.
WARNING
For a hazardous situation with medium risk, possibly resulting in severe injuries or death if not
avoided.
CAUTION
For a hazardous situation with low risk, resulting in damage to the device or the property or in loss
of data, or minor or medium injuries if not avoided.
ATTENTION
For important information about the product. May lead to equipment damage if not avoided.
NOTE
For useful information about the product.
Warning Symbols
General
hazard
Caution, hot
surface
Electrical shock
hazard
Safety Precautions
WARNING! DO NOT use the Hotplate-Stirrer / Hotplate / Stirrer in explosive atmospheres or with
materials that could cause a hazardous environment from processing. Keep in mind the material flash
point relative to the target temperature that has been set. Also, the user should be aware that the
protection provided by the equipment may be impaired if used with accessories not provided by the
manufacturer.
Always operate unit on a level surface for best performance and maximum safety.
DO NOT lift unit by the top plate.
CAUTION! To avoid electrical shock, completely cut off power to the unit by disconnecting the power
cord from the wall outlet. Disconnect unit from the power supply prior to maintenance and servicing.
Spills should be removed promptly after the unit has cooled down. DO NOT immerse the unit for
cleaning. Alkalis spills, hydrofluoric acid or phosphoric acid spills may damage the unit and lead to
thermal failure.
CAUTION! The top plate can reach 500°C; DO NOT touch the heated surface. Use caution at all times.
Keep the unit away from explosive vapors and clear of papers, drapery, and other flammable materials.
Keep the power cord away from the heater plate.
DO NOT operate the unit at high temperatures without a vessel/sample on the top plate.
DO NOT operate the unit if it shows sign of electrical or mechanical damage.
WARNING! Units are NOT explosion proof. Use caution when heating volatile materials.
Earth Ground –Protective Conductor Terminal. Protective earthing of the equipment is achieved via
connection of the provided power cord to a compatible grounded power outlet.
Alternating Current
1.2. Intended Use
The VWR Hotplate-Stirrer / Hotplate / Stirrer are intended for general laboratory use. Safety cannot be guaranteed
if used outside of the intended use.

4 vwr.com I Instruction Manual VWR®Advanced Hotplate-Stirrers
1.3. Package Contents
•Hotplate-Stirrer / Hotplate / Stirrer Unit
•UK Power Cord
•EU Power Cord
•EU to Swiss Adapter
•Stir Bar (40 x 8 mm) for Hotplate-Stirrer /Stirrer units
•Quick Start Guide
1.4. Installation
Upon receiving the VWR Hotplate-Stirrer / Hotplate / Stirrer check to ensure that no damage has occurred during
shipment. It is important that any damage that occurred in transport is detected at the time of unpacking. If you do
find such damage, the carrier must be notified immediately.
After unpacking, place the Hotplate-Stirrer / Hotplate / Stirrer on a level bench or table, away from explosive
vapors. Ensure that the surface on which the unit is placed will withstand typical heat produced by the unit and
place the unit a minimum of 15 cm from vertical surfaces. Do not position the equipment such that it is difficult to
disconnect the power cord during use. Always place the unit on a sturdy work surface.
The Hotplate-Stirrer / Hotplate / Stirrer is supplied with an EU to Swiss adapter, as well as EU and UK power cords
that are inserted into the IEC connector on the back of the unit first, and should be plugged into a properly
grounded outlet. If the cord supplied does not meet your needs, please use an approved power cord that has
ratings equal or exceeding those of the originally provided cord and that complies with the local/national regulations
of the country in which the equipment is to be used. Replacement of the plug must be made by a qualified
electrician.
EURO TO SWISS ADAPTER
Step 1. Align the Swiss plug adaptor with the unit’s
Euro style cord.
Step 2. Firmly connect the Swiss plug adaptor to the
power cord.
Note - The connection between the adaptor and the
power cord will be permanent.

5 vwr.com I Instruction Manual VWR®Advanced Hotplate-Stirrers
1.5. Overview
1.5.1 Specifications
Round Top Hotplate-Stirrer
Note:+ 5.1 cm diameter center of top plate
++ 800 mL of water in 1 L flask, 38 mm stir bar, 150 rpm and 50°C, 23°C ambient, 20 cm SS probe
Overall dimensions (L x W x H)
26.7 x 17.3 x 12.7 cm
Top plate dimensions:
Ø 13.5 cm
Top plate material:
Aluminum
Electrical (50/60 Hz):
230 volts: 4.6 amps: 1058 watts
Fuses:
10A time-delay, 5x20mm, 250VAC
Temperature range:
Ambient +5° to 380°C
Temperature stability of top plate+:
± 3% > 100°C, ± 2% ≤ 100°C
Temperature stability with temperature probe++:
± 1% > 100°C, ± 1°C ≤ 100°C
Stir capacity:
10 L
Speed range:
60 to 1600 rpm
Speed stability:
± 2%
Weight capacity:
Up to 19.9 kg
Ship weight:
2.3 kg

6 vwr.com I Instruction Manual VWR®Advanced Hotplate-Stirrers
18×18 Hotplate-Stirrer
Overall dimensions (L x W x H)
30.7 x 22.4 x 12.2 cm
Top plate dimensions:
17.8 x 17.8 cm
Top plate material:
Ceramic
Electrical (50/60 Hz):
230 volts: 6.0 amps: 1380 watts
Fuses:
10A time-delay, 5x20mm, 250VAC
Temperature range:
Ambient +5° to 500°C
Temperature stability of top plate+:
± 3% > 100°C, ± 2% ≤ 100°C
Temperature stability with temperature probe++:
± 1% > 100°C, ± 1°C ≤ 100°C
Stir capacity:
10 L
Speed range:
60 to 1600 rpm
Speed stability:
± 2%
Weight capacity:
Up to 18.1 kg
Ship weight:
3.5 kg
Note:+ 5.1 cm diameter center of top plate
++ 800 mL of water in 1 L flask, 38 mm stir bar, 150 rpm and 50°C, 23°C ambient, 20 cm SS probe

7 vwr.com I Instruction Manual VWR®Advanced Hotplate-Stirrers
18x18 Hotplate-Stirrer
Overall dimensions (L x W x H)
30.7 x 22.4 x 12.2 cm
Top plate dimensions:
17.8 x 17.8 cm
Top plate material:
Aluminum
Electrical (50/60 Hz):
230 volts: 6.0 amps: 1380 watts
Fuses:
10A time-delay, 5x20mm, 250VAC
Temperature range:
Ambient +5° to 340°C
Temperature stability of top plate+:
± 3% > 100°C, ± 2% ≤ 100°C
Temperature stability with temperature probe++:
± 1% > 100°C, ± 1°C ≤ 100°C
Stir capacity:
10 L
Speed range:
60 to 1600 rpm
Speed stability:
± 2%
Weight capacity:
Up to 18.1 kg
Ship weight:
3.4 kg
Note:+ 5.1 cm diameter center of top plate
++ 800 mL of water in 1 L flask, 38 mm stir bar, 150 rpm and 50°C, 23°C ambient, 20 cm SS probe

8 vwr.com I Instruction Manual VWR®Advanced Hotplate-Stirrers
18x18 Hotplate
Overall dimensions (L x W x H)
30.7 x 22.4 x 12.2 cm
Top plate dimensions:
17.8 x 17.8 cm
Top plate material:
Ceramic
Electrical (50/60 Hz):
230 volts: 6.0 amps: 1380 watts
Fuses:
10A time-delay, 5x20mm, 250VAC
Temperature range:
Ambient +5° to 500°C
Temperature stability of top plate+:
± 3% > 100°C, ± 2% ≤ 100°C
Temperature stability with temperature probe++:
± 1% > 100°C, ± 1°C ≤ 100°C
Weight capacity:
Up to 18.1 kg
Ship weight:
2.8 kg
Note:+ 5.1 cm diameter center of top plate
++ 800 mL of water in 1 L flask and 50°C, 23°C ambient, 20 cm SS probe

9 vwr.com I Instruction Manual VWR®Advanced Hotplate-Stirrers
18x18 Stirrer
Overall dimensions (L x W x H)
30.7 x 22.4 x 12.2 cm
Top plate dimensions:
17.8 x 17.8 cm
Top plate material:
Ceramic
Electrical (50/60 Hz):
230 volts: 0.5 amps: 115 watts
Fuses:
5A quick-acting, 5x20mm, 250VAC
Stir capacity:
10 L
Speed range:
60 to 1600 rpm
Speed stability:
± 2%
Weight capacity:
Up to 18.1 kg
Ship weight:
3.5 kg

10 vwr.com I Instruction Manual VWR®Advanced Hotplate-Stirrers
25X25 Hotplate-Stirrer
Overall dimensions (L x W x H)
42.2 x 28.6 x 12.2 cm
Top plate dimensions:
25.4 x 25.4 cm
Top plate material:
Ceramic
Electrical (50/60 Hz):
230 volts: 7.0 amps: 1610 watts
Fuses:
230 volts: 10A time-delay, 5x20mm, 250VAC
Temperature range:
Ambient +5° to 500°C
Temperature stability of top plate+:
± 3% > 100°C, ± 2% ≤ 100°C
Temperature stability with temperature probe++:
± 1% > 100°C, ± 1°C ≤ 100°C
Stir capacity:
13 L
Speed range:
60 to 1600 rpm
Speed stability:
± 2%
Weight capacity:
Up to 18.1 kg
Ship weight:
5.7 kg
Note:+ 5.1 cm diameter center of top plate
++ 800 mL of water in 1 L flask, 38 mm stir bar, 150 rpm and 50°C, 23°C ambient, 20 cm SS probe

11 vwr.com I Instruction Manual VWR®Advanced Hotplate-Stirrers
1.5.2 Device Setup
Hotplate-Stirrer (Round Top, 18x18, 25x25-230V)
A. Display Screen
B. Standby Indicator
C. Left Knob: Controls temperature and settings
menu
D. Right Knob: Controls speed
E. External RTD Probe Port
F. Fuse
G. Power Entry Module (PEM)
H. Threaded Knob for Accessory Rod
I. Standby Switch
J. Feet: Not adjustable
H
E
F
G
I
J
A
B
C
A
D

12 vwr.com I Instruction Manual VWR®Advanced Hotplate-Stirrers
Hotplate (18x18)
A. Display Screen
B. Standby Indicator
C. Knob: Controls temperature and settings menu
E. External RTD Probe Port
F. Fuse
G. Power Entry Module (PEM)
H. Threaded Knob for Accessory Rod
I. Standby Switch
J. Feet: Not adjustable
A
B
C
E
H
F
G
A
I
J

13 vwr.com I Instruction Manual VWR®Advanced Hotplate-Stirrers
Stirrer (18x18)
A. Display Screen
B. Standby Indicator
D. Knob: Controls speed
F. Fuse
G. Power Entry Module (PEM)
H. Threaded Knob for Accessory Rod
I. Standby Switch
J. Feet: Not adjustable
A
B
D
H
F
G
I
A
J

14 vwr.com I Instruction Manual VWR®Advanced Hotplate-Stirrers
1.5.3 Display (Hotplate-Stirrers)
L. Heater Temperature: Switches to external probe temperature when the probe is plugged in and P is
illuminated.
M. Heater Indicator: Illuminates when heater is running.
N. Heat Setting Indicator: Switches Heater Temperature (L) to Heat Setting when illuminated.
O. Single Point Calibration Icon
P. External Probe Icon
Q. Hot Top Caution Indicator: Illuminates when the heater is ≥ 40°C.
R. Speed Setting Indicator: Illuminates until stirrer reaches the Speed Setting (S).
S. Speed Setting
T. Stirrer Indicator: Illuminates when stirrer is running

15 vwr.com I Instruction Manual VWR®Advanced Hotplate-Stirrers
1.5.4 Display (Hotplate)
L. Heater Temperature: Switches to external probe temperature when the probe is plugged in and P is
illuminated.
M. Heater Indicator: Illuminates when heater is running.
N. Heat Setting Indicator: Switches Heater Temperature (L) to Heat Setting when illuminated.
O. Single Point Calibration Icon
P. External Probe Icon
Q. Hot Top Caution Indicator: Illuminates when the heater is ≥ 40°C.

16 vwr.com I Instruction Manual VWR®Advanced Hotplate-Stirrers
1.5.5 Display (Stirrer)
R. Speed Setting Indicator: Illuminates until stirrer reaches the Speed Setting (S).
S. Speed Setting
T. Stirrer Indicator: Illuminates when stirrer is running

17 vwr.com I Instruction Manual VWR®Advanced Hotplate-Stirrers
2. OPERATION
2.1 Getting Ready
To get ready:
1. Plug the female end of the provided power cord into
PEM (G) on the rear side of the unit.
2. Plug the male end of the power cord into a matching
standard grounded outlet.
3. The unit will beep once and the screen will illuminate
with three displays:
a) The first will display the unit type (left) and the
software version (right).
b) The second will display the unit’s electrical
power (left) and frequency (right).
c) The third will be the unit’s main operating
screen.
Note: If the third screen is blank and the red
standby indicator (B) to the left of the screen is
illuminated, the unit is in standby mode.
2.2 Standby Mode
1. The rocker switch (I) on the right side of the unit
controls standby mode.
2. When the unit is switched off:
a) All heating and stirring functions will turn off.
b) The screen will be blank and the standby
indicator (B) to the left of the screen will be
illuminated.
If the heater temperature is above 40°C, the
hot top caution indicator will remain
illuminated as well as the current top plate
temperature and “HOT”.
3. When the unit is switched on:
a) All heating and stirring functions will remain
off.
b) The main operating screen will return.
Previous heating and stirring settings will be
displayed.
c) The unit is ready for normal use.

18 vwr.com I Instruction Manual VWR®Advanced Hotplate-Stirrers
2.3 Controlling the Stirrer
STIRRING OPERATING TIPS
The stirrer increases speed at a steady rate until the setpoint is reached. If the stirrer is not reaching its setpoint: 1)
the stir bar may be too large, 2) the liquid may be too viscous, 3) the setpoint speed may need to be reduced.
Additionally, the magnetic strength of stir bars reduce over time and may need to be replaced.
When heating and stirring a reaction vessel within an oil bath or similar set-up, the stirring function will stir up to
approximately 2.5 cm from the top plate. The stirring speed will vary according to liquid viscosity, spin bar length,
and distance from top plate. Adjust one or all of these to achieve the desired stirring speed. For example: the closer
the reaction vessel is to the top plate, the strong the magnetic connection between the unit and the stir bar.
1. Rotate the right knob (D) to control the speed setting
(S).
a) Clockwise rotation will increase the speed
setting (S).
b) Counterclockwise rotation will decrease the
speed setting (S).
2. To turn on the stirrer, press and hold the right knob
(D) until the unit beeps and the stirrer indicator (T)
illuminates.
a) The unit will beep once to confirm the stirrer
has been turned on.
b) The stirrer indicator (T) next to the “RPM”
symbol will blink to indicate that the stirrer is
on and ramping to the target speed.
c) Once the stirrer has reached the target speed,
the speed setting indicator (R) will disappear
and the stirrer indicator (T) will stop blinking
and remain illuminated.
3. To change the speed setting while the stirrer is on:
a) Rotate the right knob (D) to the new speed
setting.
The speed setting (S) will blink to indicate that
the speed setting is not confirmed.
b) Briefly press the right knob (D) to confirm the
new speed setting.
The speed setting (S) will stop blinking once
the new setting is confirmed.
Note: If the speed setting (S) remains idle without
confirmation for 6 seconds, it will reset to the
current setting.
4. To turn off the stirrer, press and hold the right knob
(D) until the unit beeps and the stirrer indicator (T)
disappears.
a) The unit will beep once to confirm the stirrer
has been turned off.
b) The stirrer indicator (T) next to the “RPM”
symbol will disappear to indicate that the
stirrer is off.
c) The speed setting indicator (R) will illuminate.

19 vwr.com I Instruction Manual VWR®Advanced Hotplate-Stirrers
2.4 Controlling the Top Plate Heater
1. Rotate the left knob (C) to control the heat setting (L).
a) Clockwise rotation will increase the heat
setting (L).
b) Counterclockwise rotation will decrease the
heat setting (L).
2. To turn on the heater, press and hold the left knob
(C) until the unit beeps and the heater indicator (M)
illuminates.
a) The unit will beep once to confirm the heater
has been turned on.
b) The heater indicator (M) will illuminate next to
the “°C” symbol to indicate that the heater is
running.
c) The current heater temperature (L) will be
alternately displayed with the heat setting (L)
in the top left region of the screen.
d) When the heater temperature (L) is above
40°C, the hot top caution indicator (Q) will be
illuminated.
3. To change the heat setting (L) while the heater is on:
a) Rotate the left knob (C) to the new heat
setting.
The heat setting (L) will blink to indicate that
the heat setting is not confirmed.
The heat setting indicator (N) will illuminate.
b) Briefly press the left knob (C) to confirm the
new heat setting.
The heat setting (L) will stop blinking once the
new setting is confirmed.
If the heat setting (L) remains idle without
confirmation for 6 seconds, it will reset to the
current setting.
4. To turn off the heater, press and hold the left knob
(C) until the unit beeps and the heater indicator (M)
disappears.
a) The unit will beep once to confirm the heater
has been turned off.
b) The heater indicator (M) next to the “°C”
symbol will disappear to indicate that the
heater is off.
CAUTION: This does not mean that the top
plate is safe to touch.
c) Once the heater temperature (L) cools below
40°C, the hot top caution indicator (Q) will
disappear.