WAGO 750-468/040-000 User manual

Pos: 2/D okumentation allge mein/Einband/Ei nband Frontseite - Handbuch; CI 201 7;mit DocV ariablen (Standard) @ 28\ mod_14864775029 10_0.docx @ 405388 @ @ 1
Manual
WAGO-I/O-SYSTEM 750 XTR
750-468/040-000
4AI 0-10V DC S.E. /XTR
4-Channel Analog Input Module, 0-10 VDC,
Single-ended /XTR
Version 1.3.0
Pos: 3/ Alle Serien (Allge meineM odule)/Rechtlic hes, Allgemein es/Impressum für Standard handbücher - allg.A ngaben, Anschrift en,T elefonnummern und E- Mail-Adressen @ 3\mod_12191511 18203_21.docx @ 210 60@ @ 1

2 WAGO-I/O-SYSTEM 750 XTR
750-468/040-000 4AI 0-10V DC S.E. /XTR
Manual
Version 1.3.0
© 2019 WAGO Kontakttechnik GmbH & Co. KG
All rights reserved.
WAGO Kontakttechnik GmbH & Co. KG
Hansastraße 27
D-32423 Minden
Phone: [phone]
Fax: [phone]
E-Mail: i[email protected]
Web: www.wago.com
Technical Support
Phone: [phone]
Fax: [phone]
E-Mail: suppo[email protected]
Every conceivable measure has been taken to ensure the accuracy and
completeness of this documentation. However, as errors can never be fully
excluded, we always appreciate any information or suggestions for improving the
documentation.
E-Mail: [e-mail]
We wish to point out that the software and hardware terms as well as the
trademarks of companies used and/or mentioned in the present manual are
generally protected by trademark or patent.
WAGO is a registered trademark of WAGO Verwaltungsgesellschaft mbH.
=== Ende der Liste für Te xtmarke Einband_vorn e===

WAGO-I/O-SYSTEM 750 XTR Table of Contents 3
750-468/040-000 4AI 0-10V DC S.E. /XTR
Manual
Version 1.3.0
Pos: 5/D okumentati onallg emein/Verzeich nisse/Inhaltsverz eichnis -Ü berschrift oGu ndV erzeichnis @ 3\mod _1219151230875 _21.docx @ 21063 @ @ 1
Table of Contents
1Notes about this Documentation.............................................................5
1.1 Validity of this Documentation.................................................................5
1.2 Copyright................................................................................................5
1.3 Symbols .................................................................................................6
1.4 Number Notation ....................................................................................8
1.5 Font Conventions ...................................................................................8
2Important Notes ........................................................................................9
2.1 Legal Bases............................................................................................9
2.1.1 Subject to Changes............................................................................9
2.1.2 Personnel Qualifications ....................................................................9
2.1.3 Use of the 750 Series in Compliance
with Underlying Provisions.................................................................9
2.1.4 Technical Condition of Specified Devices.........................................10
2.1.4.1 Disposal ......................................................................................10
2.1.4.1.1 Electrical and Electronic Equipment........................................10
2.1.4.1.2 Packaging...............................................................................11
2.2 Safety Advice (Precautions) .................................................................12
3Device Description..................................................................................15
3.1 View .....................................................................................................17
3.2 Connectors...........................................................................................18
3.2.1 Data Contacts/Local Bus..................................................................18
3.2.2 Power Jumper Contacts/Field Supply ..............................................19
3.2.3 CAGE CLAMP®Connectors.............................................................19
3.3 Display Elements..................................................................................20
3.4 Operating Elements..............................................................................20
3.5 Schematic Diagram..............................................................................21
3.6 Technical Data .....................................................................................22
3.6.1 Device Data.....................................................................................22
3.6.2 Supply..............................................................................................22
3.6.3 Communication................................................................................22
3.6.4 Inputs...............................................................................................22
3.6.5 Connection Type..............................................................................22
3.6.6 Mechanical Conditions.....................................................................23
3.6.7 Climatic Environmental Conditions...................................................23
3.7 Approvals .............................................................................................24
3.8 Standards and Guidelines ....................................................................25
4Process Image.........................................................................................31
5Mounting..................................................................................................33
5.1 Mounting Sequence..............................................................................33
5.2 Inserting and Removing Devices..........................................................34
5.2.1 Inserting the I/O Module...................................................................34
5.2.2 Removing the I/O Module ................................................................35
6Connect Devices.....................................................................................36
6.1 Connecting a Conductor to the CAGE CLAMP®...................................36

4 Table of Contents WAGO-I/O-SYSTEM 750 XTR
750-468/040-000 4AI 0-10V DC S.E. /XTR
Manual
Version 1.3.0
6.2 Connection Examples...........................................................................37
7Use in Hazardous Environments ...........................................................38
7.1 Marking Configuration Examples..........................................................39
7.1.1 Marking for Europe According to ATEX and IECEx..........................39
7.1.2 Marking for the United States of America
(NEC) and Canada (CEC)................................................................43
7.2 Installation Regulations.........................................................................46
7.2.1 Special Notes Regarding Explosion Protection ................................46
7.2.2 Special Notes Regarding ANSI/ISA Ex ............................................48
List of Figures ..................................................................................................49
List of Tables....................................................................................................50
=== Ende der Liste für Te xtmarke Verzeichnis_vor ne ===

WAGO-I/O-SYSTEM 750 XTR Notes about this Documentation 5
750-468/040-000 4AI 0-10V DC S.E. /XTR
Manual
Version 1.3.0
Pos: 7/ Alle Serien (Allge meineM odule)/Übersc hriften/Ebene 1/Hin weise zu dieser Do kumentation - Übersc hrift 1 @ 4\mod_12379 87661750_21.doc x@ 29029 @ 1 @ 1
1 Notes about this Documentation
Pos: 8/ Alle Serien (Allge meineM odule)/Sicher heits- und sonstige Hi nweise/Hinweis/Hi nweis: Dokument ation aufbewahren @ 4 \mod_123798733 9812_21.docx @ 2902 6 @ @ 1
Always retain this documentation!
This documentation is part of the product. Therefore, retain the documentation
during the entire service life of the product. Pass on the documentation to any
subsequent user. In addition, ensure that any supplement to this documentation
is included, if necessary.
Pos: 9/ Alle Serien (Allge meineM odule)/Übersc hriften/Ebene 2/Gültig keitsbereich - Üb erschrift 2 @ 12\mod_ 133891244877 6_21.docx @ 96469 @ 2 @ 1
1.1 Validity of this Documentation
Pos: 10 /Serie 750 (WAGO-I/ O-SYSTEM)/Hi nweise zur Dokume ntation( alte Struktur)/ Gültigkeitsbereich/G ültigkeitsbereich D okumentation I/O-M odul 750-xxxx, oh neV ariantenangabe @ 14\mod_1358944 037947_21.docx @ 10 9346@ @ 1
This documentation is only applicable to the I/O module 750-468/040-000
(4AI 0-10V DC S.E. /XTR).
Pos: 11 /Serie 750 (WAGO-I/ O-SYSTEM)/Hi nweise zur Dokume ntation( alte Struktur)/Hi nweise/Achtung: Hi nweisz ur Dokument ation I/O-Modul e 750-xxxx/040-000 @ 27\ mod_1468502299 549_21.doc x@ 2168 92@ @1
The I/O module 750-468/040-000 shall only be installed and operated according
to the instructions in this manual, in the system description for the WAGO-I/O-
SYSTEM 750 XTR and in the manual for the used fieldbus coupler/controller.
Consider power layout of the WAGO-I/O-SYSTEM 750 XTR!
In addition to these operating instructions, you will also need the system
description “Design Notes XTR –Guidelines and Recommendations for
Increasing Operational Safety” and the manual for the used fieldbus
coupler/controller, which can be downloaded at www.wago.com. There, you can
obtain important information including information on electrical isolation, system
power and supply specifications.
Pos: 12.1 /Alle Serien (Allg emeine Module)/Ü berschriften/Ebe ne2/Ur heberschutz - Ü berschrift 2 @ 23\mod_1 435647042188 _21.docx @ 184808 @ 2 @ 1
1.2 Copyright
Pos: 12.2 /Alle Serien (Allg emeine Module)/R echtliches, Allgemei nes/Urheberschutz ausführlich @ 4\mod_ 123556514523 4_21.docx @ 27691 @ @ 1
This Manual, including all figures and illustrations, is copyright-protected. Any
further use of this Manual by third parties that violate pertinent copyright
provisions is prohibited. Reproduction, translation, electronic and phototechnical
filing/archiving (e.g., photocopying) as well as any amendments require the
written consent of WAGO Kontakttechnik GmbH & Co. KG, Minden, Germany.
Non-observance will involve the right to assert damage claims.
Pos: 12.3 /Dokume ntation allgemein/Glie derungselemente/---Seit enwechsel--- @ 3\mod_ 1221108045078_ 0.docx@ 2 1810 @ @ 1

6 Notes about this Documentation WAGO-I/O-SYSTEM 750 XTR
750-468/040-000 4AI 0-10V DC S.E. /XTR
Manual
Version 1.3.0
Pos: 12.4 /Alle Serien (Allg emeine Module)/Ü berschriften/Ebe ne2/ Symbole - Überschrif t 2@ 1 3\mod_13510 68042408_21.doc x@ 105270 @ 2 @ 1
1.3 Symbols
Pos: 12.5.1 /Alle Serien ( Allgemeine Module)/ Sicherheits- und sons tigeHi nweise/Gefa hr/Gefahr: _Warnung vorP ersonenschäden allg emein_ - Erläuter ung @ 13\mod_1343 309450020_21.doc x@ 1 01029 @ @ 1
Personal Injury!
Indicates a high-risk, imminently hazardous situation which, if not avoided, will
result in death or serious injury.
Pos: 12.5.2 /Alle Serien ( Allgemeine Module)/ Sicherheits- und sons tigeHi nweise/Gefa hr/Gefahr: _Warnung vorP ersonenschäden d urch elektrischen Strom _- Erläuterung @ 13\mod_134 3309694914_21.doc x@ 1 01030@ @ 1
Personal Injury Caused by Electric Current!
Indicates a high-risk, imminently hazardous situation which, if not avoided, will
result in death or serious injury.
Pos: 12.5.3 /Alle Serien ( Allgemeine Module)/ Sicherheits- und sons tigeHi nweise/Warn ung/Warnung: _Warn ung vor Personensch äden allgemein_ - Erlä uterung @ 13\mo d_1343309877041_ 21.docx @ 101035 @ @ 1
Personal Injury!
Indicates a moderate-risk, potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Pos: 12.5.4 /Alle Serien ( Allgemeine Module)/ Sicherheits- und sons tigeHi nweise/Vorsic ht/Vorsicht: _Warn ung vor Personensc häden allgemein_ - Erlä uterung @ 13\mod_13 43310028762_2 1.docx @ 101038 @ @ 1
Personal Injury!
Indicates a low-risk, potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
Pos: 12.5.5 /Alle Serien ( Allgemeine Module)/ Sicherheits- und sons tigeHi nweise/Ac htung/Achtung: _War nung vor Sachschäd enallg emein_ - Erläuteru ng@ 13\mod_134331 0134623_21.doc x@ 1 01041 @ @ 1
Damage to Property!
Indicates a potentially hazardous situation which, if not avoided, may result in
damage to property.
Pos: 12.5.6 /Alle Serien ( Allgemeine Module)/ Sicherheits- und sons tigeHi nweise/Ac htung/Achtung: _War nung vor Sachschäden durc h elektrostatisch e Aufladung_ - Erläuter ung @ 13\mod_134 3310227702_21.doc x@ 101044 @ @ 1
Damage to Property Caused by Electrostatic Discharge (ESD)!
Indicates a potentially hazardous situation which, if not avoided, may result in
damage to property.
Pos: 12.5.7 /Alle Serien ( Allgemeine Module)/ Sicherheits- und sons tigeHi nweise/Hin weis/Hinweis: _Wic htigerHi nweis allgemein _- Erläuterung @ 13\mod_134 3310326906_21.doc x@ 101 047@ @ 1
Important Note!
Indicates a potential malfunction which, if not avoided, however, will not result in
damage to property.
Pos: 12.5.8 /Alle Serien ( Allgemeine Module)/ Sicherheits- und sons tigeHi nweise/Infor mation/Informatio n:_ Weitere Informatio n allgemein_ - Erläuter ung @ 13\mod_1343 310439814_21. docx@ 1 01051 @ @ 1

WAGO-I/O-SYSTEM 750 XTR Notes about this Documentation 7
750-468/040-000 4AI 0-10V DC S.E. /XTR
Manual
Version 1.3.0
Additional Information:
Refers to additional information which is not an integral part of this
documentation (e.g., the Internet).
Pos: 12.6 /Dokume ntation allgemein/Glie derungselemente/---Seit enwechsel--- @ 3\mod_ 1221108045078_ 0.docx@ 2 1810 @ @ 1

8 Notes about this Documentation WAGO-I/O-SYSTEM 750 XTR
750-468/040-000 4AI 0-10V DC S.E. /XTR
Manual
Version 1.3.0
Pos: 12.7 /Alle Serien (Allg emeine Module)/Ü berschriften/Ebe ne2/D arstellung der Za hlensysteme - Überschrift 2 @ 23\mod_14356 47128078_21.doc x@ 184811 @ 2@ 1
1.4 Number Notation
Pos: 12.8 /Alle Serien (Allg emeine Module)/R echtliches, Allgemei nes/Zahlensyst eme@ 3\mod_12210594 54015_21.doc x@ 217 11 @ @ 1
Table 1: Number Notation
Number Code
Example
Note
Decimal
100
Normal notation
Hexadecimal
0x64
C notation
Binary
'100'
'0110.0100'
In quotation marks, nibble separated
with dots (.)
Pos: 12.9 /Alle Serien (Allg emeine Module)/Ü berschriften/Ebe ne2/ Schriftkonventi onen- Ü berschrift 2 @ 23\ mod_14356471 86005_21.docx @ 184 814 @ 2@ 1
1.5 Font Conventions
Pos: 12.10/ Alle Serien (Allgemeine Mo dule)/Rechtliches, Allge meines/Schriftkonve ntionen @ 3\mod_122105 9521437_21.docx @ 21714 @ @ 1
Table 2: Font Conventions
Font Type
Indicates
italic
Names of paths and data files are marked in italic-type.
e.g.: C:\Program Files\WAGO Software
Menu
Menu items are marked in bold letters.
e.g.: Save
>
A greater-than sign between two names means the selection of a
menu item from a menu.
e.g.: File > New
Input
Designation of input or optional fields are marked in bold letters,
e.g.: Start of measurement range
“Value”
Input or selective values are marked in inverted commas.
e.g.: Enter the value “4 mA” under Start of measurement range.
[Button]
Pushbuttons in dialog boxes are marked with bold letters in square
brackets.
e.g.: [Input]
[Key]
Keys are marked with bold letters in square brackets.
e.g.: [F5]
Pos: 13 /Dokument ation allgemein/Glieder ungselemente/---Seite nwechsel--- @ 3\mod_ 1221108045078_0. docx@ 21 810 @ @ 1

WAGO-I/O-SYSTEM 750 XTR Important Notes 9
750-468/040-000 4AI 0-10V DC S.E. /XTR
Manual
Version 1.3.0
Pos: 14 /Alle Serien (Allg emeine Module)/Üb erschriften/Ebene 1/Wic htige Erläuterunge n- Überschrift 1 @ 4\mod _1241428899156 _21.docx @ 32170 @ 1 @ 1
2 Important Notes
Pos: 15.1 /Alle Serien (Allg emeine Module)/R echtliches, Allgemei nes/Wichtige Erläu terungen - Einleitung @ 3\ mod_12210598 18031_21.docx @ 2 1717@ @ 1
This section includes an overall summary of the most important safety
requirements and notes that are mentioned in each individual section. To protect
your health and prevent damage to devices as well, it is imperative to read and
carefully follow the safety guidelines.
Pos: 15.2 /Alle Serien (Allg emeine Module)/Ü berschriften/Ebe ne2/R echtliche Grundlag en - Überschrift 2 @ 3\ mod_1221060626 343_21.docx @ 21726 @ 2@ 1
2.1 Legal Bases
Pos: 15.3 /Alle Serien (Allg emeine Module)/R echtliches, Allgemei nes/Änderungs vorbehalt - Überschrift 3 und In halt @ 3\mod_12 21060036484_21.do cx @2 1720 @ 3 @ 1
2.1.1 Subject to Changes
WAGO Kontakttechnik GmbH & Co. KG reserves the right to provide for any
alterations or modifications. WAGO Kontakttechnik GmbH & Co. KG owns all
rights arising from the granting of patents or from the legal protection of utility
patents. Third-party products are always mentioned without any reference to
patent rights. Thus, the existence of such rights cannot be excluded.
Pos: 15.4 /Serie 750 (WA GO-I/O-SYSTEM)/ Wichtige Erläuteru ngen( alte Struktur)/Pers onalqualifi kation/Personalqualifi kation 750-xxxx - Übersc hrift 3 und Inhalt @ 3\mod _12240612080 46_21.docx @ 24063 @ 3 @ 1
2.1.2 Personnel Qualifications
All sequences implemented on WAGO-I/O-SYSTEM 750 devices may only be
carried out by electrical specialists with sufficient knowledge in automation. The
specialists must be familiar with the current norms and guidelines for the devices
and automated environments.
All changes to the coupler or controller should always be carried out by qualified
personnel with sufficient skills in PLC programming.
Pos: null /Serie 750 (WAG O-I/O-SYSTEM)/ Wichtige Erläuterung en (alte Struktur)/B estimmungsgemäß eV erwendung/Bes timmungsgemäße V erwendung 750- xxxx- Ü berschrift 3 @ 32\m od_15360411415 28_21.docx @ 498494 @ 3@ 1
2.1.3 Use of the 750 Series in Compliance with Underlying
Provisions
Pos: 15.6 /Serie 750 (WA GO-I/O-SYSTEM)/ Wichtige Erläuteru ngen( alte Struktur)/B estimmungsgemäß e Verwendung/Besti mmungsgem äßeV erwendung 750- xxxx für Geräte - STD - mit EN 61 000-6-3 @ 3\mod_1224 064151234_21. docx@ 24070 @ @ 1
Fieldbus couplers, controllers and I/O modules found in the modular WAGO-I/O-
SYSTEM 750 receive digital and analog signals from sensors and transmit them
to actuators or higher-level control systems. Using controllers, the signals can
also be (pre-) processed.
The devices have been developed for use in an environment that meets the IP20
protection class criteria. Protection against finger injury and solid impurities up to
12.5 mm diameter is assured; protection against water damage is not ensured.
Unless otherwise specified, operation of the devices in wet and dusty
environments is prohibited.
Operating the WAGO-I/O-SYSTEM 750 devices in home applications without
further measures is only permitted if they meet the emission limits (emissions of
interference) according to EN 61000-6-3. You will find the relevant information in
the section “Device Description” > “Standards and Guidelines” in the manual for
the used fieldbus coupler or controller.

10 Important Notes WAGO-I/O-SYSTEM 750 XTR
750-468/040-000 4AI 0-10V DC S.E. /XTR
Manual
Version 1.3.0
Appropriate housing (per 2014/34/EU) is required when operating the
WAGO-I/O-SYSTEM 750 in hazardous environments. Please note that a
prototype test certificate must be obtained that confirms the correct installation of
the system in a housing or switch cabinet.
The implementation of safety functions such as EMERGENCY STOP or safety
door monitoring must only be performed by the F-I/O modules within the modular
WAGO-I/O-SYSTEM 750. Only these safe F-I/O modules ensure functional
safety in accordance with the latest international standards. WAGO's
interference-free output modules can be controlled by the safety function.
Pos: 15.7 /Alle Serien (Allg emeine Module)/R echtliches, Allgemei nes/Technischer Zus tand der Geräte - Übersc hrift 3 und Inhalt @ 3\mod_ 1221060446109 _21.docx @ 21723 @ 3 @ 1
2.1.4 Technical Condition of Specified Devices
The devices to be supplied ex works are equipped with hardware and software
configurations, which meet the individual application requirements. These
modules contain no parts that can be serviced or repaired by the user. The
following actions will result in the exclusion of liability on the part of WAGO
Kontakttechnik GmbH & Co. KG:
•Repairs,
•Changes to the hardware or software that are not described in the
operating instructions,
•Improper use of the components.
Further details are given in the contractual agreements. Please send your
request for modified and new hardware or software configurations directly to
WAGO Kontakttechnik GmbH & Co. KG.
Pos: null /Alle Serien (Allg emeine Module)/Ü berschriften/Ebene 4/ Entsorgen - Übersc hrift 4 @ 30\mod_1510 145115652_21.doc x@ 4 69859 @ 4 @ 1
2.1.4.1 Disposal
Pos: null /Alle Serien (Allg emeine Module)/Ü berschriften/Eben e 5/Elektro- und Elektroni kgeräte - Überschrift 5 @ 3 2\mod_1537446 988068_21.doc x@ 501657 @ 5@ 1
2.1.4.1.1 Electrical and Electronic Equipment
Pos: null /Alle Serien (Allg emeine Module)/R echtliches, Allgemein es/Elektro- und El ektronikgeräte @ 32\mo d_153242508606 1_21.docx @ 491989 @ @ 1
Electrical and electronic equipment may not be disposed of
with household waste. This also applies to products without
this symbol.
Electrical and electronic equipment contain materials and substances that can be
harmful to the environment and health. Electrical and electronic equipment must
be disposed of properly after use.
WEEE 2012/19/EU applies throughout Europe. Directives and laws may vary
nationally.

WAGO-I/O-SYSTEM 750 XTR Important Notes 11
750-468/040-000 4AI 0-10V DC S.E. /XTR
Manual
Version 1.3.0
Environmentally friendly disposal benefits health and protects
the environment from harmful substances in electrical and
electronic equipment.
•Observe national and local regulations for the disposal of electrical and
electronic equipment.
•Clear any data stored on the electrical and electronic equipment.
•Remove any added battery or memory card in the electrical and
electronic equipment.
•Have the electrical and electronic equipment sent to your local
collection point.
Improper disposal of electrical and electronic equipment can be harmful to the
environment and human health.
Pos: null /Dokumenta tion allgemein/Gliederu ngselemente/----Leerzeile-( 1Z)---- @ 28\mod_148 5262995837_0.doc x@ 40 4006@ @ 1
Pos: null /Alle Serien (Allg emeine Module)/Ü berschriften/Ebene 5/ Verpackung - Übersc hrift 5 @ 32\mod_1537 447044202_21.d ocx @ 501662 @ 5 @ 1
2.1.4.1.2 Packaging
Pos: null /Alle Serien (Allg emeine Module)/R echtliches, Allgemein es/Verpackung @ 32 \mod_153744678 6416_21.docx @ 501 653 @ @ 1
Packaging contains materials that can be reused.
PPWD 94/62/EU and 2004/12/EU packaging guidelines apply throughout
Europe. Directives and laws may vary nationally.
Environmentally friendly disposal of the packaging protects the environment and
allows sustainable and efficient use of resources.
•Observe national and local regulations for the disposal of packaging.
•Dispose of packaging of all types that allows a high level of recovery,
reuse and recycling.
Improper disposal of packaging can be harmful to the environment and wastes
valuable resources.
Pos: 15.10 /Dokumentati onallg emein/Gliederung selemente/---Seitenwec hsel--- @ 3\mod_122110 8045078_0.docx @ 21810 @ @ 1

12 Important Notes WAGO-I/O-SYSTEM 750 XTR
750-468/040-000 4AI 0-10V DC S.E. /XTR
Manual
Version 1.3.0
Pos: 15.11 /Alle Serien (Allge meine Module)/Üb erschriften/Eb ene 2/Sicherheitshinweis e -Ü berschrift 2 @ 6\m od_126018029 9987_21.docx @ 4672 4@ 2 @ 1
2.2 Safety Advice (Precautions)
Pos: 15.12 /Alle Serien (Allge meine Module)/Sic herheits- und sonstig e Hinweise/Einlei tung Sicherheitshin weise Hardware @ 6\ mod_1260180170 493_21.docx @ 46720 @ @ 1
For installing and operating purposes of the relevant device to your system the
following safety precautions shall be observed:
Pos: 15.13.1 /Alle Serie n(Allg emeine Modul e)/Sicherheits- und so nstige Hinweise/Gef ahr/Gefahr: Nicht an G eräten unter Spannung ar beiten! @ 6\mod_ 1260180365327_ 21.docx @ 46727 @ @ 1
Do not work on devices while energized!
All power sources to the device shall be switched off prior to performing any
installation, repair or maintenance work.
Pos: null /Alle Serien (Allg emeine Module)/Sich erheits- und sonstig eHi nweise/Gefahr/G efahr: Produkt nur in ein emg eeigneten Gehä useei nbauen! @ 33\m od_15435818814 35_21.docx @ 511972 @ @ 1
Install device in only one suitable enclosure!
The device is an open system. Install the device in a suitable enclosure. This
enclosure must:
•Guarantee that the max. permissible degree of pollution is not exceeded.
•Offer adequate protection against contact.
•Prevent fire from spreading outside of the enclosure.
•Offer adequate protection against UV irradiation.
•Guarantee mechanical stability
•Restrict access to authorized personnel and may only be opened with tools
Pos: null /Alle Serien (Allg emeine Module)/Sich erheits- und sonstig eHi nweise/Gefahr/G efahr: Trennvorric htung undÜ berstromsch utz @ 33\mod_ 1543915978439_21. docx @ 512267 @ @ 1
Ensure disconnect and overcurrent protection!
The device is intended for installation in automation technology systems.
Disconnect protection is not integrated. Connected systems must be protected by
a fuse.
Provide suitable disconnect and overcurrent protection on the system side!
Pos: 15.13.4 /Alle Serie n(Allg emeine Modul e)/Sicherheits- und so nstige Hinweise/Gef ahr/Gefahr: Unfall verhütungsvorschrift enb eachten! @ 6\mo d_12601806570 00_21.docx @ 46735 @ @ 1
Pos: 15.13.5 /Alle Serien (Allgem eineM odule)/Sicherh eits- unds onstige Hinweise/G efahr/Gefahr: Auf nor mgerechtenA nschluss achten! @ 6\ mod_126018075347 9_21.docx @ 46739 @ @ 1
Ensure a standard connection!
To minimize any hazardous situations resulting in personal injury or to avoid
failures in your system, the data and power supply lines shall be installed
according to standards, with careful attention given to ensuring the correct
terminal assignment. Always adhere to the EMC directives applicable to your
application.
Pos: 15.14 /Serie 750 (W AGO-I/O-SYST EM)/Wichtige Erläuter ungen (alte Struktur) /Sicherheits- und sonstig eHi nweise/Warn ung/Warnung: Speisu ng ausschließlich aus S ELV-/PELV- Versorgung (24V-XTR-I /O-Module) @ 29\ mod_1493107132 163_21.docx @ 41961 8@ @ 1
Power from SELV/PELV power supply only!
All field signals and field supplies connected to this XTR I/O module
(750-468/040-000) must be powered from SELV/PELV power supply(s)!
Pos: 15.15 /Alle Serien (Allge meine Module)/Sic herheits- und sonstig e Hinweise/Vorsic ht/Vorsicht: Heiße O berfläche nicht berühre n!( allgemein) @ 6\ mod_1264428115 588_21.docx @ 48610 @ @ 1

WAGO-I/O-SYSTEM 750 XTR Important Notes 13
750-468/040-000 4AI 0-10V DC S.E. /XTR
Manual
Version 1.3.0
Do not touch hot surfaces!
The surface of the housing can become hot during operation. If the device was
operated at high ambient temperatures, allow it to cool off before touching it.
Pos: null /Serie 750 (WAG O-I/O-SYSTEM)/ Wichtige Erläuterung en (alte Struktur)/Sic herheits- und sonstige Hi nweise/Achtung/ Achtung: Einwan dfreie Kontaktierung z urTragsc hiene gewä hrleisten! @ 34\mo d_1550481407638_ 21.docx @ 530599 @ @ 1
Ensure proper contact with the DIN-rail!
Proper electrical contact between the DIN-rail and device is necessary to
maintain the EMC characteristics and function of the device.
Pos: 15.16.2 /Alle Serie n(Allg emeine Modul e)/Sicherheits- und so nstige Hinweise/Acht ung/Achtung: Def ekte oder beschädigte Ger äte austauschen! @ 6 \mod_1260180 857358_21.docx @ 46 743 @ @ 1
Replace defective or damaged devices!
Replace defective or damaged device/module (e.g., in the event of deformed
contacts).
Pos: 15.16.3 /Alle Serie n(Allg emeine Modul e)/Sicherheits- und so nstige Hinweise/Acht ung/Achtung: Geräte vor kriechenden und isoli erenden Stoffen schütze n! @ 6\mod_126 0181036216_21.d ocx @ 46747 @ @ 1
Protect the components against materials having seeping and insulating
properties!
The components are not resistant to materials having seeping and insulating
properties such as: aerosols, silicones and triglycerides (found in some hand
creams). If you cannot exclude that such materials will appear in the component
environment, then install the components in an enclosure being resistant to the
above-mentioned materials. Clean tools and materials are imperative for
handling devices/modules.
Pos: 15.16.4 /Alle Serie n(Allg emeine Modul e)/Sicherheits- und so nstige Hinweise/Acht ung/Achtung: Reinig ung nur mit zulässigen M aterialien! @ 6\mo d_1260181203293_ 21.docx @ 46751 @ @ 1
Clean only with permitted materials!
Clean housing and soiled contacts with propanol.
Pos: 15.16.5 /Alle Serie n(Allg emeine Modul e)/Sicherheits- und so nstige Hinweise/Acht ung/Achtung: Kei nKo ntaktspray verwend en! @ 6\mod_12601 81290808_21.d ocx @ 46755 @ @ 1
Do not use any contact spray!
Do not use any contact spray. The spray may impair contact area functionality in
connection with contamination.
Pos: 15.16.6 /Alle Serie n(Allg emeine Modul e)/Sicherheits- und so nstige Hinweise/Acht ung/Achtung: Ver polungen der Daten- und V ersorgungsleitu ngen vermeiden! @ 6\ mod_12601840457 44_21.docx @ 46767 @ @ 1
Do not reverse the polarity of connection lines!
Avoid reverse polarity of data and power supply lines, as this may damage the
devices involved.
Pos: 15.16.7 /Alle Serie n(Allg emeine Modul e)/Sicherheits- und so nstige Hinweise/Acht ung/Achtung: Ele ktrostatische Entla dung vermeiden! - DIN EN 613 40-5-1/-3 @ 6\mod _1260181364729 _21.docx @ 46759 @ @ 1

14 Important Notes WAGO-I/O-SYSTEM 750 XTR
750-468/040-000 4AI 0-10V DC S.E. /XTR
Manual
Version 1.3.0
Avoid electrostatic discharge!
The devices are equipped with electronic components that may be destroyed by
electrostatic discharge when touched. Please observe the safety precautions
against electrostatic discharge per DIN EN 61340-5-1/-3. When handling the
devices, please ensure that environmental factors (personnel, work space and
packaging) are properly grounded.
Pos: 15.17 /Serie 750 (W AGO-I/O-SYST EM)/Wichtige Erläuter ungen (alte Struktur) /Sicherheits- und sonstig eHi nweise/Acht ung/Achtung: XTR - Is olationsprüfungen mitDC d urchführen! @ 15\mod _1370843209441 _21.docx @ 122210 @ @ 1
Use only direct current (DC) for insulation testing!
Both the system voltage and field voltage side are capacitively coupled to the
DIN-rail. If an I/O module is mounted on the DIN-rail, application of an AC voltage
between the DIN-rail and at least one of these two potentials can lead to the
destruction of the module.
Use only direct current (DC) for insulation testing. To avoid destroying the I/O
module, you must discharge it completely before applying the test voltage again.
Pos: 16 /Dokument ation allgemein/Glie derungselemente/---Seite nwechsel--- @ 3\mod_ 1221108045078_0. docx@ 21 810 @ @ 1

WAGO-I/O-SYSTEM 750 XTR Device Description 15
750-468/040-000 4AI 0-10V DC S.E. /XTR
Manual
Version 1.3.0
Pos: 17 /Alle Serien (Allg emeine Module)/Üb erschriften/Ebene 1/G erätebeschreib ung- Ü berschrift 1 @ 3\ mod_1233756084 656_21.docx @ 27096 @ 1 @ 1
3 Device Description
Pos: 18.1 /Serie 750 (WA GO-I/O-SYSTEM)/ Gerätebeschrei bung( alte Struktur)/Ei nleitung/Anwendung /AI/Anwendung 7 50-04xx AI SE (0...10V) @ 5 \mod_1246011 969272_21.docx @ 36 226 @ @ 1
The Analog Input Module 750-468/040-000 (4AI 0-10V DC S.E. /XTR) processes
analog signals with the norm value of 0 VDC ... 10 VDC.
Pos: 18.2 /Serie 750 (WA GO-I/O-SYSTEM)/ Gerätebeschrei bung( alte Struktur)/Ei nleitung/AI/Geräte beschreibung - Einleit ung 750-0468/040-0 00@ 18\mod_139325 8256603_21.doc x@ 146266 @ @ 1
The I/O module has 4 input channels and enables field signals to be received
e.g. via the AI 1 and Ground or AI 2 and Ground connections. To connect
additional signal transducers to still available signal input channels AI 3 and AI 4,
suitable measures must be taken to distribution the ground potential and possibly
also the shield termination (e.g. via through terminal blocks or shield (screen)
clamping saddles from WAGO).
Pos: 18.3 /Serie 750 (WA GO-I/O-SYSTEM)/ Gerätebeschrei bung( alte Struktur)/Ei nleitung/I/O-Besc hreibung/AI/I/O-B eschreibung 750-04 xxA IG emeinsames M assepotential und Schir manschluss @ 5\mod _1246367616866 _21.docx @ 36357 @ @ 1
The input channels have a common ground and a shield connection.
Pos: 18.4 /Serie 750 (WA GO-I/O-SYSTEM)/ Gerätebeschrei bung( alte Struktur)/Ei nleitung/I/O-Besc hreibung/AI/I/O-B eschreibung 750-04 xxA IS chirmanschl uss Kontakt mit Tragschi ene @ 5\mod_12463 67742653_21.doc x@ 36360 @ @ 1
The shield connection is fed directly to the carrier rail and contact is made
automatically by snapping the module onto the rail.
Pos: 18.5 /Serie 750 (WA GO-I/O-SYSTEM)/ Gerätebeschrei bung( alte Struktur)/Ei nleitung/AI/Geräte beschreibung 750- 0468- weiter Infos @ 16\mo d_137725288933 6_21.docx @ 129539 @ @ 1
The input signal of each channel is electrically isolated and will be transmitted
with a resolution of 12 bits.
The operational readiness and the trouble-free local bus communication of the
channels are indicated via a green function LED.
Any configuration of the input modules is possible when designing the fieldbus
node. Grouping of module types is not necessary.
The voltage supply is done via system voltage.
Pos: 18.6 /Serie 750 (WA GO-I/O-SYSTEM)/ Wichtige Erläuteru ngen( alte Struktur)/Sic herheits- und sonstige H inweise/Hinweis/Hi nweis: Potenti aleinspeisemod ulei nsetzen! (keine LK) @ 3\ mod_1226499089 640_21.docx @ 250 26@ @ 1
Use a power supply module!
Use a power supply module for field-side power supply of downstream I/O
modules.
Pos: 18.7 /Serie 750 (WA GO-I/O-SYSTEM)/ Gerätebeschrei bung( alte Struktur)/Ei nleitung/I/O-Besc hreibung/Allgem ein/Verweis auf Kapitel "An schlüsse" @ 8\mod _1276775378035 _21.docx @ 57956 @ @ 1
The assignment of the connections is described in the “Connectors” section.
Pos: 18.8 /Serie 750 (WA GO-I/O-SYSTEM)/ Gerätebeschrei bung (alte Struktur)/Ei nleitung/I/O-Besc hreibung/Allgem ein/Verweis auf Kapitel "Ger äte anschließen" > "A nschlussbeispiel(e)" @ 5\mod_1246015 203281_21.doc x @36 298 @ @ 1
Connection examples are shown in section “Connect Devices” > …>
“Connection Example(s)”.
Pos: 18.9 /Serie 750 (WA GO-I/O-SYSTEM)/ Wichtige Erläuteru ngen( alte Struktur)/Sic herheits- und sonstige H inweise/Hinweis/Hi nweis: XTR - Misch betrieb XTR/Standar d@ 1 5\mod_136 7496420828_21.doc x@ 118326 @ @ 1
Mixed operation
Mixed operation (standard/XTR modules) within a node is possible when groups
of modules are electrically isolated on the field side (i.e., electrically isolated
power supply).
Pos: 18.10 /Serie 750 (W AGO-I/O-SYST EM)/Wichtige Erläuter ungen (alte Struktur) /Sicherheits- und sonstige Hinweise/Hi nweis/Hinweis: XTR - Erhöhte Störf estigkeit @ 15\mod_136 7496424993_21.doc x@ 11833 0@ @ 1

16 Device Description WAGO-I/O-SYSTEM 750 XTR
750-468/040-000 4AI 0-10V DC S.E. /XTR
Manual
Version 1.3.0
Increased interference!
For standard-compliant application in substation instrumentation and control,
telecontrol systems, railway technology or shipbuilding certified operation,
field-side power supply filter 750-624/040-001 or power supply filter
750-626/040-000 are generally to be used for XTR module groups.
Pos: 18.11 /Serie 750 (W AGO-I/O-SYST EM)/Gerätebeschr eibung (alte Struktur)/Einl eitung/Einsatzb ereich/Einsatzbereic h 750-xxxx/04 0-000 alle XTR-Koppler/ Controller ohne Einsc hränkung+Misc hbetriebhinweise @ 1 5\mod_13684259 19479_21.doc x@ 11 9444 @ @ 1
The I/O module can be operated with all fieldbus couplers/controllers of the
WAGO-I/O-SYSTEM 750 XTR.
Observe the instructions for mixed operation when used in mixed operation
behind standard fieldbus couplers/controllers.
Pos: 19 /Dokument ation allgemein/Glieder ungselemente/---Seite nwechsel--- @ 3\mod_ 1221108045078_0. docx@ 21 810 @ @ 1

WAGO-I/O-SYSTEM 750 XTR Device Description 17
750-468/040-000 4AI 0-10V DC S.E. /XTR
Manual
Version 1.3.0
Pos: 20 /Alle Serien (Allg emeine Module)/Üb erschriften/Ebene 2/A nsicht - Überschrift 2 @ 4 \mod_124098421 7343_21.docx @ 3195 8@ 2 @ 1
3.1 View
Pos: 21 /Serie 750 (WAGO-I/ O-SYSTEM)/ Gerätebeschreibu ng(alt e Struktur)/Ansic ht/AI/Ansicht 750-0 468/040-xxx @ 16\ mod_137811100 2443_21.docx @ 1304 22@ @ 1
Figure 1: View
Pos: 22 /Serie 750 (WAGO-I/ O-SYSTEM)/ Gerätebeschreibu ng(alt e Struktur)/Ansic ht/Ansicht CageClam p®_Legende mit LEDs_ohne Leistungs kontakte @ 16\mod _1371816091053_2 1.docx @ 124052 @ @ 1
Table 3: Legend for Figure “View”
Pos.
Description
Details See Section
1
Marking possibility with Mini-
WSB
---
2
Status LEDs
“Device Description” > “Display Elements”
3
Data contacts
“Device Description” > “Connectors”
4
CAGE CLAMP®connectors
“Device Description” > “Connectors”
5
Release tab
“Mounting” > ”Inserting and Removing
Devices”
Pos: 23 /Dokument ation allgemein/Glieder ungselemente/---Seite nwechsel--- @ 3\mod_ 1221108045078_0. docx@ 21 810 @ @ 1

18 Device Description WAGO-I/O-SYSTEM 750 XTR
750-468/040-000 4AI 0-10V DC S.E. /XTR
Manual
Version 1.3.0
Pos: 24 /Alle Serien (Allg emeine Module)/Üb erschriften/Ebene 2/A nschlüsse - Übersc hrift 2 @4 \mod_1240984 262656_21.doc x @3 1961 @ 2 @ 1
3.2 Connectors
Pos: 25 /Serie 750 (WAGO-I/ O-SYSTEM)/ Gerätebeschreibu ng(alt e Struktur)/Ansc hlüsse/Datenkon takte/Lokalbus - Üb erschrift 3 @ 6\mod_1256 294684083_21. docx@ 43660 @ 3 @ 1
3.2.1 Data Contacts/Local Bus
Pos: 26.1 /Serie 750 (WA GO-I/O-SYSTEM)/ Gerätebeschrei bung( alte Struktur)/Ansc hlüsse/Daten kontakte - Feldbuskoppl er/-controller und Mo dule –Abbildung un dBesc hreibung @ 3\mod _1231771259187 _21.docx @ 26002 @ @ 1
Communication between the fieldbus coupler/controller and the I/O modules as
well as the system supply of the I/O modules is carried out via the local bus. The
contacting for the local bus consists of 6 data contacts, which are available as
self-cleaning gold spring contacts.
Figure 2: Data Contacts
Pos: 26.2 /Serie 750 (WA GO-I/O-SYSTEM)/ Wichtige Erläuteru ngen( alte Struktur)/Sic herheits- und sonstige H inweise/Achtu ng/Achtung: I/O-Mo dule nicht auf Goldfeder kontakte legen! @ 7\mo d_12663184636 36_21.docx @ 5069 5@ @ 1
Do not place the I/O modules on the gold spring contacts!
Do not place the I/O modules on the gold spring contacts in order to avoid soiling
or scratching!
Pos: null /Serie 750 (WAG O-I/O-SYSTEM)/ Wichtige Erläuterung en (alte Struktur)/Sic herheits- und sonstige Hi nweise/Achtung/ Achtung: ESD - Auf Po tentialausgleich der Umg ebung achten! @ 32\m od_153907726 2331_21.docx @ 5044 33@ @ 1
Pay attention to potential equalization from the environment!
The devices are equipped with electronic components that may be destroyed by
electrostatic discharge. When handling the devices, please ensure that
environmental factors (personnel, work space and packaging) are properly
equalized. Do not touch any conducting parts, e.g., data contacts.
Pos: 27 /Dokument ation allgemein/Glieder ungselemente/---Seite nwechsel--- @ 3\mod_ 1221108045078_0. docx@ 21 810 @ @ 1

WAGO-I/O-SYSTEM 750 XTR Device Description 19
750-468/040-000 4AI 0-10V DC S.E. /XTR
Manual
Version 1.3.0
Pos: 28 /Serie 750 (WA GO-I/O-SYSTEM)/ Gerätebeschreibu ng(alt e Struktur)/Ansc hlüsse/Leistungsko ntakte/Feldvers orgung -Ü berschrift 3@ 6\ mod_1256294692 864_21.docx @ 43664 @ 3@ 1
3.2.2 Power Jumper Contacts/Field Supply
Pos: 29 /Serie 750 (WAGO-I/ O-SYSTEM)/ Gerätebeschreibu ng(alt e Struktur)/Ansc hlüsse/Leistung skontakte nicht vorha nden@ 8\mod_128107 3936319_21.docx @ 6 2530@ @1
The I/O module 750-468/040-000 has no power jumper contacts.
Pos: 30 /Serie 750 (WAGO-I/ O-SYSTEM)/ Gerätebeschreibu ng(alt e Struktur)/Ansc hlüsse/CAGE CLAMP- Anschlüsse - Ü berschrift 3 @ 6\mod_125 6296337770_21.d ocx @ 43674 @ 3 @ 1
3.2.3 CAGE CLAMP®Connectors
Pos: 31 /Serie 750 (WAGO-I/ O-SYSTEM)/ Gerätebeschreibu ng(alt e Struktur)/Ansc hlüsse/AI/Anschlüsse 7 50-0468 @ 16 \mod_1377 245737103_21.docx @ 12 9476@ @ 1
Figure 3: CAGE CLAMP®Connectors
Table 4: Legend for Figure “CAGE CLAMP®Connectors”
Channel
Designation
Connector
Function
1
AI 1
1
Analog input 1: Signal
2
AI 2
5
Analog input 2: Signal
3
AI 3
2
Analog input 3: Signal
4
AI 4
6
Analog input 4: Signal
-
Common
(ground)
3
Ground potential of the analog input circuit
-
7
Ground potential of the analog input circuit
-
Shield
(screen)
4
Shield termination
-
8
Shield termination
Pos: 32 /Serie 750 (WAGO-I/ O-SYSTEM)/ Wichtige Erläuterung en(al te Struktur)/Sich erheits- und sonstige Hin weise/Hinweis/Hi nweis: Geschir mte Signalleitungen ver wenden! @ 7\mod_1 265723251019_21 .docx @ 50140 @ @ 1
Use shielded signal lines!
Only use shielded signal lines for analog signals and I/O modules which are
equipped with shield clamps. Only then can you ensure that the accuracy and
interference immunity specified for the respective I/O module can be achieved
even in the presence of interference acting on the signal cable.
Pos: 33 /Serie 750 (WAGO-I/ O-SYSTEM)/ Anschließen/Verw eis auf Kapitel Schirmung i m Systemhandbuc hXT R@ 19\mod_139 9554643119_21.doc x@ 153199 @ @ 1
For further information about shielding, see system manual WAGO-I/O-SYSTEM
750 XTR, section “Connect Devices” > …> “Shielding.”
Pos: 34 /Dokument ation allgemein/Glieder ungselemente/---Seite nwechsel--- @ 3\mod_ 1221108045078_0. docx@ 21 810 @ @ 1

20 Device Description WAGO-I/O-SYSTEM 750 XTR
750-468/040-000 4AI 0-10V DC S.E. /XTR
Manual
Version 1.3.0
Pos: 35 /Alle Serien (Allg emeine Module)/Üb erschriften/Ebe ne2/A nzeigeelement e- Ü berschrift 2 @ 4\mod_1 240984390875_2 1.docx @ 31964 @ 2 @ 1
3.3 Display Elements
Pos: 36 /Serie 750 (WAGO-I/ O-SYSTEM)/ Gerätebeschreibu ng(alt e Struktur)/Anz eigeelemente/AI/A nzeigeelemente 7 50-0468/040- xxx@ 16\mod_137811120 3904_21.docx @ 13 0425@ @ 1
Figure 4: Display Elements
Table 5: Legend for Figure “Display Elements”
Chan-
nel
Designation
LED
State
Function
1
Function AI 1
A
Off
Not ready for operation, or no/faulty
local bus communication
Green
Ready for operation, uninterrupted
local bus communication
2
Function AI 2
E
Off
Not ready for operation, or no/faulty
local bus communication
Green
Ready for operation, uninterrupted
local bus communication
3
Function AI 3
C
Off
Not ready for operation, or no/faulty
local bus communication
Green
Ready for operation, uninterrupted
local bus communication
4
Function AI 4
G
Off
Not ready for operation, or no/faulty
local bus communication
Green
Ready for operation, uninterrupted
local bus communication
Pos: 37 /Alle Serien (Allg emeine Module)/Üb erschriften/Ebene 2/B edienelemente - Ü berschrift 2 @ 4\mod_1 239191655456_21.d ocx @ 30439 @ 2 @ 1
3.4 Operating Elements
Pos: 38 /Serie 750 (WA GO-I/O-SYSTEM)/ Gerätebeschreibu ng(alt e Struktur)/Be dienelemente/Bedi enelemente I/O-Mo dul7 5x-xxxx nicht vorh anden @ 4\mod_123 6322031125_21.d ocx @ 28063 @ @ 1
The I/O module 750-468/040-000 has no operating elements.
Pos: 39 /Dokument ation allgemein/Glieder ungselemente/---Seite nwechsel--- @ 3\mod_ 1221108045078_0. docx@ 21 810 @ @ 1