Waykar PD09B User manual

Home Dehumidifier
Please read the manual carefully
before using the unit
PD09B
USER MANUAL
www.waykar.com

FOR CUSTOMERS
TO ACCESS CUSTOMER
SUPPORT FASTER
Thank you for purchasing our dehumidifier.
Waykar wishes that our products and services can bring convenience to your
work and life. We highly recommend that you keep the manual for reference
if you encounter unexpected events using the unit.
Please read the manual carefully to ensure proper use of the dehumidifier.
Our dehumidifiers are widely used in family bedrooms, bathrooms, basements,
offices and storage rooms, etc.
The dehumidifiers from Waykar provide quick and efficient operation to
reduce room's humidity and bring you a healthy and comfortable life.
If there is any problem of the product, please contact Waykar Customer
Service at [e-mail] with your Purchase Order ID to help you
address the problem more effectively.

BEFORE FIRST USE:
To prevent any internal damage, it is very important to keep refrigeration
units (like this one) upright throughout their journey.
Please leave it standing upright and outside the box for 24 HOURS
before plugging it in.

TABLE OF CONTENTS
The graphics and functions provided in this manual may not be the same as the
actual product. Please always refer to the actual product.
The model of the machine on the manual is for reference only. Please check the
corresponding content and operate the machine based on the actual product.
The right to interpret the relevant terms belongs to the company.
Safety Instructions
Common Faults and Solutions

SAFETY INSTRUCTIONS
The machine power wiring must be in accordance with national wiring rules,
and, power line should be connected to the reliable external Earth Line.
The fixed wiring of the machine connection must be equipped with an all-pole
disconnect device (air switch) with at least 0.118-inch distance of electric shock.
This appliance can not be used by children aged under 8 years old and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge unless they have been given supervision or instructions concerning
use of the appliance in a safe way and
understand the hazards involved. Children
shall not play with the appliance. Cleaning
and user maintenance shall not be made
by children without supervision.
When using dehumidifier, other objects
surrounding the machine need to be
kept at least a distance of 7.9 inches
(20cm) as shown in the picture on the
right:
Safety Notes:
For your safety, please read the manual carefully and keep the manual to serve
as a reference for product usage. This product is for home use only. Please use
this product according to the installation and operation of this manual.

Drainage
Hose Outlet
Water Tank

1. Control Panel
Set the humidity down
Set the humidity up Press to initiate the auto-start
and auto-stop feature
Speed Button
Control the fan speed
Lock (2s) Button
Press the button and hold for
2 seconds, the control panel
will be locked
Control the LED panel to light
up or go out

be

When the water tank is full of water, the machine will turn off automatically. The
indicator light " " or " " will flash. After you empty the water from
the tank, the indicator light " " or " " will turn off. The machine will
start to work.
Control the fan speed. Press to select either High or Normal fan speed. Higher fan
speed will result in quicker moisture removal. Set the speed high for maximum
moisture removal. When the humidity has been reduced and quiet operation is
more preferred, set the fan speed back to Normal.
If the device is turned on and a power interruption occurred, after starting the
unit again, it will keep the previous parameters of setup.
1. In the power on state, press the "Light" button to tum on or tum off the backlight;
2. When light funtion is powered on, except the "Power" button and the "Lighting"
button is on, other backlight indicators will be off.
When the unit is turned on, press "LOCK" and hold on for 2 seconds, the control
panel will be locked together with the other buttons.
To unlock the control panel, press and hold the "LOCK" button again for 2 seconds.
Caution:
Water tank must be placed in right position, otherwise will cause the water
full alarm.

3. Display Status Description
When the dehumidifier running at a lower temperature, the system will automati-
cally determine whether there is a presence of frost. If any frost exists, it will
defrost automatically.
this
this

4. Instructions for Drying Clothes
Step 1.
Hang the washed clothes in a small space such as cloakroom, bathroom,
or storage room.
Note: Keep away the unit from the water drips of the washed clothes.
Step 2.
Open the dehumidifier and set the humidity level at 30%RH. It's the best
if you let the air outlet of the dehumidifier to blow air to the clothes
directly.
2. The drying effect will vary from the thickness of clothes, the number of
clothes and the size of the drying space.Theoretically, the effect will be
better when clothes are few, thin and space is small.
3. The drying process would take 3-8 hours, and we suggest that
continuous drainage mode would be more suitable when drying clothes.
1. The dehumidifier can be used for drying clothes in rainy weather.

Fault Phenomenon Analysis of Causes Processing Method
Humidity sensor failure?
Set the humidity to 30%RH, the
dehumidifier can still continue to
work, and can be used normally.
Repair and replace the humidity
sensor.
1. Water on the surface
of the humidity sensor?
2.Humidity sensor failure?
The dehumidifier is not affected
and can continue to work, and
can be used normally.
Repair and replace the humidity
sensor.
Please let the dehumidifier keep
working for a period of time,
after the water on the surface of
humidity sensor is removed, it
will return to normal.
contact Waykar
Customer Service at for [e-mail]
5. Faults & Processing Methods
Humidity always shows
"25%RH"(There is a big
difference from the actual
humidity)
Humidity always shows
"99%RH"(There is a big
difference from the actual
humidity)

6. Empty The Water Tank
Two ways are available to remove the collected water.
Put the water tank back in
place, the water full indicator
will go out
When the water tank is already full, the WATER FULL indicator will light up, the
dehumidifier will automatically shut down until the tank has been emptied and
placed back to the unit.
Pull the water tank out from the
bottom with both of your hands

Take off the
Water Tank Cover
Note:

Drainage Cap
7. Continuous Drainage
Pull out the power supply, take out the water tank, open the drainage cap, remove
the black rubber plug, insert the water hose into the continuous drainage port and
push it back into the water tank.
Connect the power supply to start the operation. The water outlet of the water
hose should be lower than the continuous drainage port by more than 3.9 inches,
and the water hose cannot be bent.
(Note: The diameter of continuous drainage port is 0.63 inches.)
Open the drainage cap
Insert the water hose into the
continuous drainage port
Remove the Black Rubber Plug

Please use a soft and a slightly wet textile or cloth to clean it.
3. Slowly insert the filter back into the machine body.
1. Empty the water in the water tank.
2. Roll up the power cord and tie it up.
3. Clean the filter.
4. Place the machine in a cool and dry environment.

Is the Full Tank indicator blinking?
This product does not apply to
over hot or cold environment, the
machine will automatically enter
the protection mode. It is a normal
phenomenon.
When running under lower
ambient temperature, the machine
will automatically defrost, which is
a normal phenomenon. It will
restart dehumification again until
the defrosting process finished.
It is normal the compressor
ceases while defrosting process.
Wait until the process finished, it
will restart dehumidification again.
Is the room humidity lower or
reaching the preset humidity
level?
(When the room humidity has
reached the preset level, the
dehumidifier will enter Standby
Mode and the indicator on LCD
will flash. )
Please set the humidity decrease
by 5% than the room humidity or
set the humidity to 30%.
This is to prevent the frequent
start of the machine. Does the
machine stop working just now?
The dehumidifier is designed to
work in the humidity range of 30%-
80%. Above or below this range, it
will not work.

product
Room temperature is too low, or
below 41℉(5℃): The machine
will not work or undergo poor
dehumifying efficiency in low
temperature.
Please wait until the temperature
rises to above 5℃or higher.
Clean up the dirt or lint on the air
outlet and intake.
Continuous Mode
Do Not set the humidity too low.
Typically, 40-50% are good for
use.
Please check whether the packing
bag of the filter had been removed
and the filter has been installed
correctly.
The
to
to
levelly.

Connect the hose with the
drainage port tightly.
The water tank has not been
installed properly.
The float of water tank has been
stuck.
Re-install the water tank properly.
Move the float and let it swing
freely.
If the dehumidifier is still not working properly as expected and the trouble-
shooting steps or solutions above may not resolve the issue, please unplug
the power and shut down the dehumidifier, then contact Waykar Customer
Service at [e-mail].

Do not insert thin rods and hard
objects into the machine body to
avoid malfunction and danger.
When cleaning the dehumidifier,
please use the wet textile to
wipe gently, do not shoot the
water directly.
Please clean the filter every two
weeks (do not use hot water
above 104°F, alcohol, gasoline
or toluene.)
When continuous drainage, the
drain hose must be placed
horizontally, without
unevenness and winding.
After cleaning the filter, please
do not dry it under direct
sunlight, in case deformation.