Waykar PD100A User manual

Home Dehumidifier
Please read the manual carefully
before using the unit
PD100A
USER MANUAL

Thank you for purchasing our dehumidifier.
Waykar wishes that our products and services can bring convenience to your
work and life.We highly recommend that you keep the manual for reference if
you encounter unexpected events using the unit.
Please read the manual carefully to ensure proper use of the dehumidifier.
Our dehumidifiers are widely used in family bedrooms, bathrooms,
basements, offices and storage rooms, etc.
The dehumidifiers from provide quick and efficient operation to Waykar
reduce room's humidity and bring you a healthy and comfortable life.
If there is any problem of the product, please contact Waykar Customer
Service at with your Purchase Order ID to help you [e-mail]
address the problem more effectively.
FOR CUSTOMERS
TO ACCESS CUSTOMER SUPPORT FASTER

To prevent any internal damage, it is very important to keep the unit
(like this one) upright throughout its journey.
Please leave it standing as the picture shown below and outside the
box for before plugging it in.24 HOURS
BEFORE FIRST USE:

TABLE OF CONTENTS
Common Faults and Solutions
Safety Instructions
Control Panel
The graphics and functions provided in this manual may not be the same
as the actual product. Please always refer to the actual product.
The model of the machine on the manual is for reference only. Please
operate the machine based on the actual product.
The right to interpret the relevant terms belongs to the company.

SAFETY INSTRUCTIONS
Before cleaning the dehumidifier, turn off the power and unplug it from the power
outlet.
Please do not place the machine near any heat source or flammable goods.
Always keep the machine on even surface, instead of placing on uneven or
slopping ground.
When the power cord is damaged, it must be replaced by the qualified technician
approved by our company.
When using the dry clothes function, the clothes should be kept at least 40cm away
from the air to prevent water from entering the outlet and damage the machine.
The machine power wiring must be in accordance with national wiring rules, and,
power line should be connected to the reliable external Earth Line.
The fixed wiring of the machine connection must be equipped with an all-pole
disconnect device (air switch) with at least 0.118-inch distance of electric shock.
This appliance can not be used by children aged under 8 years old and persons
withreduced physical, sensory or mental capabilities or lack of experience and
knowledge unless they have been given supervision
or instructions concerning use of the appliance in
a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made
by children without supervision.
When using dehumidifier, other objects
surrounding the machine need to be kept at
least a distance of 7.9 inches (20cm). As shown
in the picture on the right:
For your safety, please read the manual carefully and keep the manual
before you use the manual for reference. Please use this product
according to the instructions of installation and operation of this manual.
Safety Notes:

Side of the Machine Back of the Machine
Product components Description
1. Control Panel 2. Outlet 3. Front Cover 4. Handle
5. Inlet 6. Continuous Drainage Outlet 7. Water Tank

1. Control Panel
Timing Light Setting Light Power Light
Timing Button
Speed Button Digital Display Setting Button
Power Button
Button Description
Power Button
Switch control of the
machine
Speed Button
Used for high wind and low
wind switching
Setting Button
Used for humidity setting
Timing button
Used for timing checking and
setting
CONTROL PANEL

2.Setting
In power on status, press setting button to set the humidity:
-The setting light will be on, and " " on the digital screen will flash and 52
show the setting humidity, then you can set the humidity within a range of
30%RH to 80%RH by making the humidity setting increase by 5%RH. Long
press the setting button can continuously set the value.
-If no operation for seconds, it will exit the humidity setting status and the
digital display will show the actual room humidity. The setting light will be
off.
-When the humidity level is set at 30%RH, the dehumidifier will work at
continuous dehumidifying mode.
The timming setting function is designed for you to set a time to turn off or
turn on the machine, automatically by the timer.
1. Press the "Timing" button to select the timer by 1-hour increment. You can
set the timer up to 24 hours. It will start to do the countdown when you start
the timer.
2. If the time is set to 00, this is called the invalid time. If you set the timer
successfully, the Timing light " " will be on. The LED screen will show the
remaining time if you press the "Timing" button, and display the current
humidity automatically after a few seconds.
Control the fan speed. Press to select either High or Low fan speed. Higher
fan speed will result in quicker moisture removal. Set the speed high for
maximum moisture removal. When the humidity has been reduced and
quiet operation is more preferred, set the fan speed back to Low.
OPERATION INSTRUCTIONS

Set the speed
high
When the humidity has been reduced
and quiet operation is more preferred, set the fan speed back to Normal.
keep the previous parameters of setup.
When the water tank is full of water,
tank
Caution:
Water tank must be placed in right position, otherwise will cause the water
full alarm.
When the unit is turned on, press "LOCK" and hold on for 2 seconds, the
control panel will be locked together with the other buttons. To unlock the
control panel, press and hold the "LOCK" button again for 2 seconds.
1. In the power on state, press the "Light"button to tum on or tum off the backlight;
2. When light funtion is powered on, except the "Power" button and the "Lighting"
button is on, other backlight indicators will be off.
Ambient Temperature & Humidity Display
In power on status, long press the Timing button for seconds, will display the
Ambient Temperature, and turn to the Humidity Value after a few seconds.
Overflow Protection
When the water tank is full of water, the machine will turn off automatically.
The indicator light will flash. After you empty the water from the tank, the
indicator light will turn off. The machine will restart to work.
Auto Defrost Function
When the dehumidifier is running at a lower temperature, the system will
automatically determine whether there is a presence of frost. If any frost exists,
it will defrost automatically.
Defrost Action: The fan runs at high wind speed when the compressor stops,
and the LED screen displays the defrosting symbol.
When defrosting status. the defrosting light " " will flash.
Action Description
Power on:
Compressor starts after the fan work for a few seconds.
Power off:
Compressor shuts down at once, and the fan will stop after a few seconds.
(When other malfunction occurs, or the humidity reaches desired level, the fan
will stop after tens of seconds).
The compressor features "3 minutes delay protection" function— While the
dehumidifier is powered, the compressor can only start again three minutes
after its last shutdown.

The power indicator will be off/on when the machine is powered off/on and flash
if the machine is in "delay on" Status.
When the current humidity reaches the setting value, it will stop dehumidification
(just maintain the humidity value), the " " on digital display and the power 52
light will flash.
If you set the speed to high speed fan mode, the high speed indicator will be on;
if you set the speed to low speed fan mode, the low speed indicator will be on.
Defrosting light will flash if in defrosting status, and vice versa.
When the water thank is full of water, the water full indicator light will flash.
4. Faults & Processing Methods
Fault Phenomenon Analysis of Causes Processing Method
Humidity sensor failure?
Set the humidity to 30%RH, the
dehumidifier can still continue to
work, and can be used normally.
Repair and replace the humidity
sensor.
1. Water on the surface
of the humidity sensor?
2.Humidity sensor failure?
The dehumidifier is not affected
and can continue to work, and
can be used normally.
Repair and replace the humidity
sensor.
Please let the dehumidifier keep
working for a period of time,
after the water on the surface of
humidity sensor is removed, it
will return to normal.
Humidity always shows
"25%RH"(There is a big
difference from the actual
humidity)
Humidity always shows
"99%RH"(There is a big
difference from the actual
humidity)
3. Display Status Description
OPERATION INSTRUCTIONS
contact Waykar
Customer Service at for [e-mail]
Note:
Before starting the machine, please ensure that the air outlet has been
opened, otherwise the machine will overheat. Do not pull out the pöwer
cord directly to stop the machine.

Water Tank Drainage
Before starting the machine, please ensure that the air outlet has been opened,
otherwise the machine will overheat.
Do not stop by directly unplug the power line.
When the water tank is full, the water full indicator will light up, the dehumidifier
will automatically shut down until the tank has been emptied and placed back to
the unit.
Hold the water tank with
both your hands, and
pull out the tank gently.
Put the water tank back
in place and the full tank
indicator will go out.
Ways to Empty the Water Tank
5. Empty The Water Tank
Do not remove the float from the water tank. If the float in the water tank is
removed, the sensor may not be able to determine the water level stored in
the tank properly that may lead to water overflow leak from the water tank.
If the water tank is dirty, just use cold water or warm water to clean it. Do not
use detergent, steel wool, chemically treated dust cloth, gasoline,benzene,
thinner or other solvents. Otherwise, it may damage the water tank and cause
it to leak.
When placing back the water tank, use your hands to press the tank back in
its place. If the water tank is not placed properly, sensors or protections from
water overflow may not operate as expected.
Note:
OPERATION INSTRUCTIONS

When continuous drainage, use the tools such as knife or plier to remove the
plastic cap of continuous drainage port from the water tank, and then insert the
hose to realize continuous drainage; the outlet of water hose should be 10cm
lower than the continuous drainage port, so as to ensure smooth drainage.
6.Continuous Drainage
Continuous Drainage Port
Water Tank
OPERATION INSTRUCTIONS

Please use a soft and a slightly wet textile or cloth to clean it.
cleaning.
C-Dehumidifier storage
1.Pull out the filter.
2.Clean the filter: Use a vacuum cleaner to gently remove the dust from
the surface of the filter. If the filter is very dirty, clean it with warm water
and mild detergent and dry it completely.
3.Slowly insert the filter back into the machine body.
When you want to store the dehumidifier because you don't use it for a
long time. Please pay attention to the following steps:
1. Empty the water in the water tank.
2. Roll up the power cord and tie it up.
3. Clean the filter.
4. Place the machine in a cool and dry environment.

The list includes most of the common cases, but not the results of defective
unit, crafts or materials in the unit.
If all troubleshooting steps have been exhausted and the issue is still
occurring, please feel free to reach out to Waykar Customer Seryice to get
further assistance.
Is the Full Tank indicator blinking?
This product does not apply to
over hot or cold environment, the
machine will automatically enter
the protection mode. It is a normal
phenomenon.
When running under lower
ambient temperature, the machine
will automatically defrost, which is
a normal phenomenon. It will
restart dehumification again until
the defrosting process finished.
It is normal the compressor
ceases while defrosting process.
Wait until the process finished, it
will restart dehumidification again.
Is the room humidity lower or
reaching the preset humidity
level?
(When the room humidity has
reached the preset level, the
dehumidifier will enter Standby
Mode and the indicator on LCD
will flash. )
Please set the humidity decrease
by 5% than the room humidity or
set the humidity to 30%.
This is to prevent the frequent
start of the machine. Does the
machine stop working just now?
The dehumidifier is designed to
work in the humidity range of 30%-
80%. Above or below this range, it
will not work.
, it

product
Room temperature is too low, or
below 41℉ (5℃): The machine
will not work or undergo poor
dehumifying efficiency in low
temperature.
Please wait until the temperature
rises to above 5℃ or higher.
Clean up the dirt or lint on the air
outlet and intake.
Continuous Mode
Do Not set the humidity too low.
Typically, 40-50% are good for
use.
Please check whether the packing
bag of the filter had been removed
and the filter has been installed
correctly.
The
to
to
levelly.

Connect the hose with the
drainage port tightly.
The water tank has not been
installed properly.
The float of water tank has been
stuck.
Re-install the water tank properly.
Move the float and let it swing
freely.
If the dehumidifier is still not working properly as expected and the
troubleshooting steps or solutions above may not resolve the issue,
please unplug the power and shut down the dehumidifier, then contact
Waykar Customer Service at . [e-mail]

Do not insert thin rods and hard
objects into the machine body to
avoid malfunction and danger.
When cleaning the dehumidifier,
please use the wet textile to
wipe gently, do not shoot the
water directly.
Please clean the filter every two
weeks (do not use hot water
above 104°F, alcohol, gasoline
or toluene.)
When continuous drainage, the
drain hose must be placed
horizontally, without
unevenness and winding.
After cleaning the filter, please
do not dry it under direct
sunlight, in case deformation.

This product can expose you to chemicals including Styrene and its compounds,
which is known to the State of California to cause cancer and birth defects or other
reproductive harm. For more information, please visit: www.P65Warning.ca.gov.
MOISTURE REMOVAL CAPACITY (659F,60%RH)

Waykar offers a 12-month warranty to all of our products together with the original
proof of purchase when a defect occured, including those newly purchased and
unused, from Waykar or through an authorized reseller, wholly or substantially, or
as a result of faulty manufacturing parts, or workmanship during the Warranty
Period. The warranty does not apply if damage is caused by other factors,
including but without limitation of:
*Please fill out all required fields and inlcude your Order ID, Date of Purchased if
applicable.
Order Number ready
Warranty
Extend Your Warranty by 1 Year
Customer Support
There are our general terms for the warranty service, but we always encourage
our customers to contact us if any issues, regardless of warranty terms. If you
are experiencing an issue with Waykar product, you can reach out to us at
[e-mail], we will dedicate our efforts to resolve it for you.

We are expecting to see our products fulfill your life and hear your voice.
Your satisfaction means a lot to us.
Please tag us if you share a snap on your social media.