1. Installation
2 3
2. Technical features
1- The installation should begin at the top of the shaft and work
downwards.
2- Install the extension cables ‘05.SLK.T6B.EXT.2M’ on one side
of each shaft light ’05.SLK.T6B’.
3- Install the brackets 05.SLK.T6B.2P on both side of the
aluminium housing.
4- Press the cables into the holders on the brackets.
5- Connect the shaft lights one by one with the extension cables.
6- Press the above cables into the holders on the brackets.
7- Connect end cable 05.SLK.T6B.END.10M to the uppermost
shaft light.
8- Press the above cable into the holder on the bracket.
9- After the lights have been connected, suspend them down the
shaft, drill through the slots in the brackets, insert the screws and
fix securely.
10- The cables serve as installation aids in that the lower lights
can simply hang freely until the light is fixed.
11- Additional cable length between the lights should be safely tied
to the wall.
12- All cabling needs to be kept a minimum of 5cm away from any
moving parts.
13- Ensure the above steps have been completed before
connecting the main power.
Input voltage 180-265VAC 50/60Hz
Tube type Integrated T6 LED
CCT 6500K
Cable type H05VVH2-F 3x0.75mm²
Working temperature -5℃~+45℃
Model no. L1(mm)
05.SLK.T6B.12W 865
05.SLK.T6B.16W 1155
L2(mm)
1025
1315
W(mm)
22
22
H(mm)
31
31
Flux(lm)
1200
1600
05.SLK.T6B.2P
05.SLK.T6B.2P 05.SLK.T6B.2P
