Weider 130 Tc Bench User manual

Serial Number
Decal
USER'S MANUAL
CAUT ON
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
Model No. WEEVBE3909.0
Serial No.
Write the serial number in the
space above for reference.
www.iconeurope.com
QUEST ONS?
If you have questions, or if there are
missing parts, please contact us:
Call: 08457 089 009
From reland: 00 (44) 53 9236102
Website: www.iconsupport.eu
E-mail: [email protected]
Write:
CON Health & Fitness, Ltd.
c/o H Group PLC
Express Way
Whitwood, West Yorkshire
WF10 5QJ
UK

2
TABLE OF CONTENTS
WARNINGDECALPLACEMENT ..............................................................2
IMP RTANTPRECAUTI NS ................................................................3
BEF REY UBEGIN ......................................................................3
ASSEMBLY ...............................................................................4
ADJUSTMENT ............................................................................5
EXERCISEGUIDELINES ....................................................................6
PARTLISTANDEXPL DEDDRAWING........................................................7
RDERINGREPLACEMENTPARTS ..................................................BackCover
WARN NG DECAL PLACEMENT
WEIDER is a registered trademark of IC N IP, Inc.
This drawing shows the location(s) of the warning
decal(s). f a decal is missing or illegible, see
the front cover of this manual and request a
free replacement decal. Apply the decal in the
location shown. Note: The decal(s) may not be
shown at actual size.

3
BEFORE YOU BEG N
Thank you for selecting the new WEIDER®130 TC
bench. The 130 TC bench is designed to help you
develop your upper and lower abdominal muscles to
give you a firm, flat stomach in only minutes a day.
For your benefit, read this manual carefully before
using the bench. If you have questions after reading
this manual, please see the front cover of this manual.
To help us assist you, note the product model number
and serial number before contacting us. The model
number and the location of the serial number decal
are shown on the front cover of this manual.
WARN NG: To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your bench before using your bench. CON assumes
no responsibility for personal injury or property damage sustained by or through the use of this
product.
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or per-
sons with pre-existing health problems.
2. Read all instructions in this manual and all
warnings on the bench before using the
bench.
3. t is the responsibility of the owner to ensure
that all users of the bench are adequately
informed of all precautions.
4. The bench is intended for home use only. Do
not use the bench in any commercial, rental,
or institutional setting.
5. Keep the bench indoors, away from moisture
and dust. Place the bench on a level surface,
with a mat beneath it to protect the floor or
carpet. Make sure that there is enough clear-
ance around the bench to mount, dismount,
and use the bench.
6. Keep children under age 12 and pets away
from the bench at all times.
7. nspect and properly tighten all parts regu-
larly. Replace any worn parts immediately.
8. Keep hands and feet away from moving
parts.
9. Always wear athletic shoes for foot protec-
tion.
10. The bench is designed to support a maxi-
mum user weight of 250 lbs. (113 kg). The
bench is not designed to be used with
weights.
11. f you feel pain or dizziness at any time
whilst exercising, stop immediately and
begin cooling down.
MPORTANT PRECAUT ONS

4
1.
Attach the Backrest (3) to the Frame (1)
with four M6 x 16mm Screws (5).
2. Attach the Leg (2) to the Frame (1) with an
M10 x 57mm Bolt (12) and an M10 Locknut
(13). Do not overtighten the Locknut; the
Leg must pivot freely.
Insert the Adjustment Pin (14) into the Leg
(2) and the Frame (1). Rotate the
Adjustment Pin so that the bent end is
over the Frame.
2
1
12
5
3
1
5
Wide
End
1
2
13
14
3. Insert a Pad Tube (4) into the upper hole in
the Leg (2). Slide the two Small Foam Pads
(6) onto the Pad Tube.
Insert the Adjustment Foot (8) into the Leg
(2). Make sure that the warning decals
are in the indicated locations.
Insert the remaining Pad Tube (4) into the
lower hole in the Leg (2) and into one of the
holes in the Adjustment Foot (8). Then,
slide the two Large Foam Pads (7) onto the
Pad Tube.
7
7
4
6
6
2
8
4
3
Warning Decals
ASSEMBLY
Place all parts in a cleared area and remove the packing materials; do not dispose of the packing materials until
assembly is completed.
Assembly requires your own Phillips screwdriver and two adjustable wrenches .
To make assembly easier, read the
information above before you begin.

5
HOW TO ADJUST THE BENCH
To adjust the angle of the bench, first remove
one of the Large Foam Pads (7) from the lower
Pad Tube (4).
Next, remove the Pad Tube (4) from the Leg (2).
Adjust the Adjustment Foot (8) to the
desired height, and then reinsert the Pad
Tube (4) into the Leg (2) and the Adjustment
Foot.
Then, slide the Large Foam Pad (7) onto the
Pad Tube (4).
HOW TO FOLD THE BENCH
To fold the bench, first remove the Adjustment
Pin (14).
Next, fold the Leg (2) in the indicated direction.
Before using the bench, make sure that the
Adjustment Pin (14) is fully inserted into the
Leg (2) and the Frame (1).
2
2
1
7
4
8
14
ADJUSTMENT
Make sure that all parts are properly tightened each time the bench is used. Replace any worn parts immedi-
ately. The bench can be cleaned with a damp cloth and a mild, non-abrasive detergent; do not use solvents.

6
EXERC SE GU DEL NES
LEG RA SES
Lie on the bench, grasp the small foam pads, and extend your legs as shown. Lift your legs with a slow, steady
motion—avoid rapid or jerky movements. Return to the starting position. Repeat.
CRUNCHES
Lie on the bench and tuck your feet under the large foam pads as shown. Bend forward at the waist, keeping
your back straight, and sit up as shown. Return to the starting position. Repeat.
The bench will help you shape your upper and lower
abdominal muscles. Be careful not to overdo it during
the first few weeks of your exercise program.
To get the most from your exercise, proper form is
important. As you perform each repetition, use your
abdominal muscles to pull yourself upward, moving in
asmooth continuous motion.
Always begin and end each workout with a few min-
utes of stretching. Remember to keep plenty of water
nearby as you exercise, and drink periodically to avoid
dehydration. f you feel faint, dizzy, or short of
breath at any time during exercise, stop immedi-
ately and begin cooling down.
WARN NG: Before beginning this
or any exercise program, consult your physi-
cian. This is especially important for persons
over age 35 or persons with pre-existing
health problems.

7
1
2
3
10
7
6
9
12
13
8
4
14
9
5
6
7
11
11
11
4
10
5
9
9
11
PART L ST AND EXPLODED DRAW NG R0509A
Model No. WEEVBE3909.0
Note: Specifications are subject to change without notice. For information about ordering replacement parts, see
the back cover of this manual. *These parts are not illustrated.
11Frame
21Leg
31Backrest
42Pad Tube
54M6 x 16mm Screw
62Small Foam Pad
72Large Foam Pad
81Adjustment Foot
9438mm Round uter Cap
10 2 38mm Square Inner Cap
11 4 19mm Round Inner Cap
12 1 M10 x 57mm Bolt
13 1 M10 Locknut
14 1 Adjustment Pin
*–Userʼs Manual
Key No. Qty. Description Key No. Qty. Description

Part No. 279425 R0509A Printed in China © 2009 IC N IP, Inc.
ORDER NG REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to
provide the following information when contacting us:
• the model number and serial number of the product (see the front cover of this manual)
• the name of the product (see the front cover of this manual)
• the key number and description of the replacement part(s) (see the PART LIST and the EXPL DED
DRAWING near the end of this manual)