Weinmann RESCUE-PACK Plus User manual

RESCUE-PACK Plus
Emergency backpack
Instructions for use
Read these instructions for use before using the product.
Ignoring the instructions for use may lead to serious injury or death.

2EN RESCUE-PACK Plus
WM 66531 2023-01
Table of contents
Table of contents
1 Introduction 5
1.1 About this document ..................................................................... 5
1.2 Explanation of warnings ................................................................ 5
2 Safety 6
2.1 Intended purpose .......................................................................... 6
2.2 Safety information ......................................................................... 6
2.2.1 Use approved medical devices and recommended other parts .................... 6
2.2.2 Do not modify the design of the emergency backpack and other parts ....... 7
2.2.3 Subject the emergency backpack to hygienic reprocessing ......................... 7
3 Description 8
3.1 Overview ....................................................................................... 8
3.2 Holding brackets ......................................................................... 11
3.3 Accessories bags ......................................................................... 12
3.4 Charging adapter ........................................................................ 13
3.5 Labeling ...................................................................................... 14
4 Function check 16
4.1 Intervals ...................................................................................... 16
4.2 Performing a visual inspection ..................................................... 16
4.3 Checking emergency backpack .................................................... 16
4.4 Checking charging interface ........................................................ 17
4.5 Checking lock on LIFE-BASE 1NG XS ........................................... 17
5 Preparation and operation 19
5.1 Fitting out emergency backpack .................................................. 19
5.1.1 Secure CO detector ................................................................................. 19
5.1.2 Fill accessories bags and transparent compartments ................................ 19
5.1.3 Stow breathing circuit ............................................................................. 19
5.1.4 Attach RFID card, NFC card, and customized labeling .............................. 19
5.2 Adjusting shoulder straps ............................................................ 20
5.2.1 Stow shoulder straps .............................................................................. 20
5.2.2 Remove shoulder straps .......................................................................... 20
5.3 Connecting emergency backpack to the power supply .................. 20

WM 66531 2023-01
RESCUE-PACK Plus EN 3
Table of contents
5.4 Securing device in the emergency backpack ................................. 20
5.4.1 Secure device to LIFE-BASE light XS in the emergency backpack .............. 20
5.4.2 Secure device to LIFE-BASE 1NG XS in the emergency backpack .............. 21
5.5 Removing device from emergency backpack ................................. 22
5.5.1 Remove device on LIFE-BASE light XS from emergency backpack ............. 22
5.5.2 Remove device on LIFE-BASE 1NG XS from emergency backpack ............. 22
5.6 Operating device in the emergency backpack ............................... 23
5.7 Lowering emergency backpack on a rope ..................................... 24
5.8 Using tension belt with magnetic fastener .................................... 25
6 Disassembly 26
6.1 Removing accessories bags .......................................................... 26
6.2 Removing oxygen cylinder and tension belts ................................ 26
6.3 Disassembling holding bracket ..................................................... 27
6.3.1 Disassemble LIFE-BASE light XS holding bracket ...................................... 27
6.3.2 Disassemble LIFE-BASE 1NG XS holding bracket ...................................... 27
6.4 Disassembling charging interface from LIFE-BASE 1NG XS ............ 28
6.5 Disassembling charging interface port .......................................... 28
6.6 Removing shoulder straps ............................................................ 29
6.7 Removing backpack padding and backpack reinforcement ........... 29
7 Hygienic reprocessing 30
7.1 Intervals ...................................................................................... 30
7.2 Preparing for hygienic reprocessing .............................................. 30
7.3 Cleaning parts manually .............................................................. 31
7.4 Disinfecting parts by wiping ......................................................... 32
7.5 Reprocessing parts mechanically .................................................. 33
7.6 Preparing parts for reuse ............................................................. 34
7.7 Cleaning and disinfection plan ..................................................... 35
8 Assembly 36
8.1 Inserting backpack padding and backpack reinforcement ............. 36
8.2 Attaching shoulder straps ............................................................ 37
8.3 Fitting charging interface port ...................................................... 37
8.4 Fitting charging interface to LIFE-BASE 1NG XS ........................... 38

4EN RESCUE-PACK Plus
WM 66531 2023-01
Table of contents
8.5 Fitting holding bracket ................................................................ 38
8.5.1 Fit LIFE-BASE 1NG XS holding bracket .................................................... 38
8.5.2 Fit LIFE-BASE light XS holding bracket .................................................... 39
8.6 Securing oxygen cylinder and tension belts .................................. 39
8.7 Securing accessories bags ............................................................ 40
9 Faults 41
10 Maintenance 43
11 Storage and transport 44
12 Proper disposal 45
12.1 Emergency backpack and accessories bags .................................. 45
12.2 Electronic waste .......................................................................... 45
12.3 Contaminated parts .................................................................... 45
13 Scope of supply 46
13.1 Version supplied (example) .......................................................... 46
13.2 Other parts ................................................................................. 46
14 Technical data 49
15 Warranty 50

WM 66531 2023-01
RESCUE-PACK Plus EN 5
1 Introduction
1 Introduction
1.1 About this document
This document describes all possible versions of the emergency
backpack.
The functions, accessories and other parts described in this
document or shown in illustrations depend on the version
procured, and are not available in all cases.
Illustrations in these instructions for use are for general
understanding, and may differ from the actual version. No claims
can be brought on the basis of any deviations.
1.2 Explanation of warnings
Danger!
DANGER indicates a dangerous situation which will result in death
or serious injury if not prevented.
Warning!
WARNING indicates a dangerous situation which may result in
death or serious injury if not prevented.
Caution!
CAUTION indicates a dangerous situation which may result in
minor injury if not prevented.
Notice!
NOTICE designates risks which may possibly cause material or
environmental damage.
Designates useful tips relating to a particular sequence of actions.

6EN RESCUE-PACK Plus
WM 66531 2023-01
2 Safety
2 Safety
The instructions for use are part of the emergency backpack. If the
instructions for use and the following safety information are not
followed in their entirety, therapy may fail or be put at risk. This
may cause the patient and the user serious or life-threatening
injury.
Follow instructions for use in their entirety.
Keep the instructions for use accessible and near the
emergency backpack at all times.
Use the emergency backpack only for the intended purpose.
Do not use the emergency backpack if it is contra-indicated.
Follow the instructions for use of the other parts.
Follow the instructions for use of the fitted devices and
associated accessories.
2.1 Intended purpose
RESCUE-PACK Plus offers extended transport and storage support
for LIFE-BASE, MEDUMAT, MEDUVENT, and MEDUCORE as well as
for other emergency medicine devices and other parts.
2.2 Safety information
2.2.1 Use approved medical devices and
recommended other parts
If third-party items are used, functional failures and restricted
fitness for use may result. Biocompatibility requirements may also
not be met. In such cases, please be aware that any claim under
warranty and liability will be voided if neither the other parts nor
the genuine replacement parts recommended in the instructions
for use are used.
Use only medical devices approved by and other parts
recommended by WEINMANN Emergency.
Use genuine replacement parts only.

WM 66531 2023-01
RESCUE-PACK Plus EN 7
2 Safety
2.2.2 Do not modify the design of the emergency
backpack and other parts
If the design of the emergency backpack or of the other parts is
modified, malfunctions may put the therapy at risk.
Do not modify the design of the emergency backpack and
other parts.
Modifications to the emergency backpack must only be carried
out by WEINMANN Emergency.
2.2.3 Subject the emergency backpack to hygienic
reprocessing
Poor hygiene poses the following risks:
• An emergency backpack that has not been reprocessed
hygienically may infect the user or the patient.
• Unsuitable cleaning agents and disinfectants may damage
the emergency backpack, cause malfunctions, and prevent
complete cleaning and disinfection.
Subject the emergency backpack and other parts to hygienic
reprocessing as per the cleaning and disinfection plan.
Wear suitable personal protective equipment, e.g., gloves,
during hygienic reprocessing.
Only use the specified cleaning agents and disinfectants.

8EN RESCUE-PACK Plus
WM 66531 2023-01
3 Description
3 Description
3.1 Overview
3-1 Front view of the emergency backpack
1
3
4
5
6
7
8
9
2
No. Designation
1 Upper front opening
2 Reflective surface
3 Lower front opening
4 Transparent pocket insert for RFID card or NFC card
5 Transparent pocket insert for customized labeling
6 Zipper
7 Handle
8 Charging interface port
9 Mounting loop for CO detector

WM 66531 2023-01
RESCUE-PACK Plus EN 9
3 Description
3-2 Rear view of the emergency backpack
1
2
3
4
5
6
No. Designation
1 Anchor point
2 Shoulder strap
3 Buckle
4 Supporting base
5 Pocket insert for shoulder straps
6 Tension belt with magnetic fastener

10 EN RESCUE-PACK Plus
WM 66531 2023-01
3 Description
3-3 Interior view of the emergency backpack
1
2
4
5
6
7
8
3
No. Designation
1 Transparent compartments
2 Magnetic fastener
3 Tension belt for breathing circuit
4 Charging adapter
5 Zipper protection
6 Tension belt for oxygen cylinder
7 Mounting loop for holding bracket
8 Strap guide

WM 66531 2023-01
RESCUE-PACK Plus EN 11
3 Description
3.2 Holding brackets
3-4 LIFE-BASE holding brackets
2
3
4
5
6
9
10
8
7
1
No. Designation
1 Charging interface for MEDUVENT Standard, MEDUMAT Standard2
2 Charging interface for LIFE-BASE 1NG XS
3 Holding bracket for LIFE-BASE 1NG XS with charging interface
4 Lock for LIFE-BASE portable units
5 Crimp connector
6 Cable tie
7 Mounting rail
8 Latch for holding bracket
9 Retaining strap with magnetic fastener for LIFE-BASE light XS holding bracket
10 LIFE-BASE light XS holding bracket

12 EN RESCUE-PACK Plus
WM 66531 2023-01
3 Description
3.3 Accessories bags
Part Designation Description
Accessories bag, square Used to stow other parts and
accessories for the device.
Accessories bag, long Used to stow other parts and
accessories for the device.
Accessories bag support
with strap guides
Used to secure the accessories bag,
long.

WM 66531 2023-01
RESCUE-PACK Plus EN 13
3 Description
3.4 Charging adapter
Part Designation Description
Charging adapter with
circular connector
Connects the charging interface
port to the power supply.
Charging adapter with
12 V vehicle combination
plug
Connects the charging interface
port to the power supply.
Charging adapter with
magnetic connector
Connects the charging interface
port to the power supply.

14 EN RESCUE-PACK Plus
WM 66531 2023-01
3 Description
3.5 Labeling
Charging adapter with
12 V angled plug
Connects the charging interface
port to the power supply.
Part Designation Description
Symbol Description
Article no.
Production batch number
Date of manufacture
CE mark (confirms that the product complies with the applicable European
directives and regulations)
Compatible devices
Consult instructions for use
Limits of the storage temperature range
Limits of the storage humidity range
Do not iron
Wash at 30 °C
REF

WM 66531 2023-01
RESCUE-PACK Plus EN 15
3 Description
Do not dry in a tumble-dryer
Symbol Description

16 EN RESCUE-PACK Plus
WM 66531 2023-01
4 Function check
4 Function check
4.1 Intervals
4.2 Performing a visual inspection
1. Check all parts of the emergency backpack for damage.
2. Check charging interface and connection line for:
• Wear
• Exposed wires
• Bent terminal connections
3. If parts are damaged: Replace defective parts.
4.3 Checking emergency backpack
1. Check that the following parts are secured firmly.
Please note: The parts must be connected securely to the
emergency backpack.
• Handles
• Shoulder straps
• Holding bracket
• Tension belts for oxygen cylinder
Part concerned Interval
Emergency backpack and all other
parts
• Before every use
• After every assembly
• After every hygienic reprocessing
• At least every 6 months
Portable unit including all fitted
devices
Follow the instructions for use of the
portable units.

WM 66531 2023-01
RESCUE-PACK Plus EN 17
4 Function check
2. Open zippers fully on both sides.
Please note: The zippers must not stick.
3. If the emergency backpack does not work perfectly: Replace
emergency backpack.
4.4 Checking charging interface
1. Power the portable unit via the charging interface (see 5.4.2,
p. 21).
Please note:
• The LED for the external power supply on the fitted device
must illuminate.
• The battery status display must illuminate or flash.
2. Check that the charging interface port is secured firmly.
Please note:
• The charging interface port must not move.
• The charging interface port must fit snugly against the
emergency backpack.
3. If the charging interface does not function perfectly: Have
WEINMANN Emergency repair or replace the charging
interface.
4.5 Checking lock on LIFE-BASE 1NG XS
1. Insert portable unit into holding bracket.
Please note:
• The portable unit must sit firmly in the holding bracket.
• The red control pin of the lock cross-bar must be flush with
the top edge of the lock housing (see 5.4.2, p. 21).
2. Hold with one hand through the handle.

18 EN RESCUE-PACK Plus
WM 66531 2023-01
4 Function check
3. Push lock cross-bar upward.
Please note:
• The lock cross-bar must be easy to push upward.
• The portable unit must not stick when being removed.
4. If the lock does not function perfectly: Have
WEINMANN Emergency replace the lock.

WM 66531 2023-01
RESCUE-PACK Plus EN 19
5 Preparation and operation
5 Preparation and
operation
5.1 Fitting out emergency
backpack
5.1.1 Secure CO detector
5.1.2 Fill accessories bags and
transparent compartments
5.1.3 Stow breathing circuit
5.1.4 Attach RFID card, NFC card,
and customized labeling

20 EN RESCUE-PACK Plus
WM 66531 2023-01
5 Preparation and operation
5.2 Adjusting shoulder
straps
5.2.1 Stow shoulder straps
5.2.2 Remove shoulder straps
5.3 Connecting
emergency backpack
to the power supply
5.4 Securing device in the
emergency backpack
5.4.1 Secure device to LIFE-
BASE light XS in the
emergency backpack
1. Connect device to the power supply. To
do so, follow the instructions for use of
the particular device.
Risk of injury due to falling device!
If the device is not secured firmly in the
emergency backpack, the device may fall
out. This may injure the user or patient.
Secure device in the emergency
backpack using the retaining strap with
magnetic fastener.