Wells HMP-6 User manual

Specifications
Overall Dimensions: Inches MM
Width 6 3/8 162
Depth 20 3/4 527
Temperature Settings: OFF/LO to HI
Weights: Lbs. KG
Installed 10 5
Shipping 11 5
HMP-6 BUILT-IN HALF-SIZE FOOD WARMER
HMP-6 BUILT-IN HALF-SIZE FOOD WARMER
I T E M N O .
WE L L S M A N U F A C T U R I N G
Features
•Threaded mounting studs provide quick and
easy top mount installation.
•The unique 6” x 20” half-size pan saves
counter space.
• The tubular element, located under the
warming pan, allows for quick heating.
• A positive-off thermostat controls the
element allowing for adjustable and more
consistent temperatures. A signal light indicates
that the heating element is energized.
• Thermostatic control is housed in a remote,
oval panel with a guard ring to help prevent
accidental temperature changes.
• Warming pan is deep-drawn, stainless steel
for maximum strength and durability.
•Designed for wet or dry operation.
•The HMP-6 warmer is Underwriters
Laboratories, Inc. recognized and
meets NSF International standards.
• A one-year warranty against defects
covers parts and labor.
Wells HMP-6 built-in half-size warmer is designed for top mount installation and
accommodates a 6” x 20” pan. This dependable and practical unit will allow a variety of
products to be served in a compact space.
Accessories / Options
Drain Screen, 21709
Optional Drain (D) is available
Drain Valve Extension Kit,
extension from drain to counter front
with remote handle, for use with
“D” models only, 20385
WELLS
HMP-6

(67)
2 5/8
(527)
20 3/4
(503)
19 13/16
(165)
6 1/2
(143)
5 5/8
(162)
6 3/8
(192)
7 9/16
(113)
4 7/16
MODEL ONLY
1/2 NPT HMP-6D
MODEL
H M P - 6
B U I LT- I N W A R M E R
DIMENSIONS: INCH
(MM)
WE L L S M A N U F A C T U R I N G
WELLS MANUFACTURING COMPANY
2 ERIK CIRCLE, PO BOX 280, VERDI, NV 89439 U.S.A.
USA PHONE: [phone] • FAX: [phone]
FOR ORDERS ONLY: [phone] • FAX: [phone]
www.wells-mfg.com
© 2002 WELLS MANUFACTURING • PRINTED IN THE U.S.A.
03/02 • REV(H) • PART NO. 41318
SUGGESTED CLEARANCE FROM
UNIT TO THE NEAREST SURFACE
BACK SIDE BOTTOM FRONT
1 2 9 2 5/8
(25) (51) (229) (67)
NOTE: Specifications are subject to change without notice. See installation instructions prior to installing the
unit. This document is not for installation purposes. The installation of recognized component units requires
additional evaluations to Underwriters Laboratories Inc. standards. Depending on the installation, clearances
can be changed upon further evaluations to UL standards.
THIS UNIT IS DESIGNED TO BE INSTALLED IN METAL COUNTERS ONLY
R
STD.4
R
H M P - 6 E L E C T R I C A L S P E C I F I C AT I O N S :
HMP-6 120 750 6.3 SINGLE NONE
MODELS VOLTS WATTS AMPS PHASE POWER SUPPLY CORD
All models with a 'D' suffix have the same electrical specifications as the standard versions.