Wells HW-10 User manual

WELLS
R A I S I N G T H E S T A N D A R D
HW-10 AND HW/SMP
COOK N' HOLD WARMERS
WE L L S M A N U F A C T U R I N G
HW-10 AND HW/SMP COOK N' HOLD WARMERS
Wells Cook N’ Hold Warmers HW-10 and HW/SMP
are engineered for efficiency. The tubular immersion
element allows for rapid heat transfer into the
water. Wells Cook N’ Hold Warmers are designed
to quickly heat food from a refrigerated state to
serving temperature.
I T E M N O .
Features
• The tubular element, located inside the well, is
controlled by a positive-off thermostat and allows
for quicker heating.
• These warmers are designed for wet operation only.
• The HW-10 and HW/SMP Cook N’ Hold Warmers
are Underwriters Laboratories, Inc. LISTED and
meet the National Sanitation Foundation standards.
• The HW-10 Cook N’ Hold Warmer (120V)
meets Canadian standards.
• A one-year warranty against defects covers
parts and labor.
Accessories / Options
Adapter Top, to convert HW-10 to hold one
4-quart inset, 20822
Adapter Top, to convert HW-10 to hold one
7-quart inset, 20175
Adapter Top, to convert HW/SMP to hold
two 7-quart insets, 20176
Adapter Top, to convert HW/SMP to hold two
4-quart insets and two 2 1/2-quart insets, 20434
Adapter Top, to convert HW/SMP to hold one
7-quart insets and one 11-quart insets, 21621
Adapter Top, to convert HW/SMP to hold
three 4-quart insets, 21615
Adapter Top, to convert HW/SMP to hold
four 2 1/2-quart insets, 21624
Adapter Top, to convert HW/SMP to hold
one 4-quart and one 7-quart inset, 21617
Inset, 2 1/2-quart capacity with lid, 20773
Inset, 4-quart capacity with lid, 20774
Inset, 7-quart capacity with lid, 20587
Inset, 11-quart capacity with lid, 20908
Legs, set of four, metal, 4” adjustable, 20563
Specifications
Dimensions: Inches MM
Overall Dimensions (HW-10):
Width 12 5/8 321
Depth 12 5/8 321
Height (incl. 1” legs) 9 3/8 238
Overall Dimensions (HW/SMP):
Width 14 3/4 375
Depth 23 1/2 597
Height (incl. 4” legs) 12 3/8 314
Temperature Range: Fahrenheit Celsius
HW-10 & HW/SMP 90º to 210º 32º to 99º
Number of Thermostats: 1
Weights: Lbs. KG
HW-10:
Installed 11 5
Shipping 14 6
HW/SMP:
Installed 22 10
Shipping 25 11
HW-10
HW/SMP
ID WLS0-415 SPEC SHEET 7/3/00, 9:38 AM1

(102)
4
(25)
1
(213)
8 3/8
(321)
12 5/8
(321)
12 5/8
(260)
10 1/4
(165)
6 1/2
(597)
23 1/2
(375)
14 3/4
(213)
8 3/8 CORD
SUPPLY
POWER
MODEL HW-10
MODEL HW/SMP
CORD
SUPPLY
POWER
HW-10 120 1650 13.7 SINGLE NEMA 5-15P
HW-10 208 1240 6.0 SINGLE NEMA6-15P
HW-10 240 1650 6.9 SINGLE NEMA 6-15P
HW/SMP 120 1800 15.0 SINGLE NEMA 5-15P
HW/SMP 208 1350 6.5 SINGLE NEMA 6-15P
HW/SMP 240 1800 7.5 SINGLE NEMA 6-15P
MODELS VOLTS WATTS AMPS PHASE POWER SUPPLY CORD
WELLS
A SP E CIA LT Y EQU I P M E NT C OM PA N Y • 20 00 WE L LS M ANUFA CTU R I N G • P R I NTE D IN T H E U.S . A.
6/00 • REV(I) • PART NO. 37059
WELLS MANUFACTURING COMPANY
2 ERIK CIRCLE, PO BOX 280, VERDI, NV 89439 U.S.A.
USA PHONE: [phone] • FAX: [phone]
FOR ORDERS ONLY: [phone] • FAX: [phone] • www.wellsbloomfield.com
MODELS
HW-10, HW/SMP
C O O K N ' H O L D WA R M E R S
WE L L S M A N U F A C T U R I N G
H W - 1 0 A N D H W / S M P E L E C T R I C A L S P E C I F I C AT I O N S :
NOTE: Specifications are subject to change without notice.
DIMENSIONS:
R
R
R
LISTED STD.4 LR
E6070 10836
INCH
(MM)
Only this model meets Canadian standards.
ID WLS0-415 SPEC SHEET 7/3/00, 9:38 AM2