Wells HSW-6 User manual

WELLS
R A I S I N G T H E S T A N D A R D
HSW-6 HALF-SIZE FOOD WARMER
HSW-6 HALF-SIZE FOOD WARMER
I T E M N O .
WE L L S M A N U F A C T U R I N G
Wells HSW-6 Half-Size Food Warmer is designed for top mount installation and
accommodates a 12” x 10” or fractional pans up to 6” deep. The warming pan is heavy-duty
stainless steel and is available with or without a drain.
Features
• Fully insulated for greater heat efficiency.
• Accommodates a 12” x 10” pan up
to 6” deep.
• The tubular element, located under the
warming pan, allows for quick heating.
• The positive-off thermostat controls the
element allowing for adjustable and more
consistent temperatures. A signal light
indicates that the heating element
is energized.
• Control is recessed in a one-piece, drawn,
front-mounted panel.
• Warming pan is deep-drawn, stainless steel
for maximum strength and durability.
• Wellslok provides quick and easy installation
in stainless steel countertops.
• Designed for wet or dry operation.
• The HSW-6 Warmer is Underwriters
Laboratories, Inc. LISTED and meets NSF
International standards.
• A one-year warranty against defects
covers parts and labor.
Accessories / Options
Wellslok Extension Kit, designed for
countertops up to 1-1/2” thick, refer to
installation instructions, 22593
Optional Drain (D) models available
Drain Valve Extension Kit, extension from
drain to counter front with remote handle,
for use with “D” models only, 20385
Specifications
Overall Dimensions: Inches MM
Width 11 5/8 295
Depth 13 7/8 352
Temperature Settings: OFF/LO to HI
Weights: Lbs. KG
Installed 9 4
Shipping 10 5
HSW-6

WELLS
COMPONENT
R
E6070
R
LISTED
(352)
13 7/8
(295)
11 5/8
(302)
11 7/8
(263)
10 11/32
(318)
12 17/32
(183)
7 3/16
(108)
4 1/4
(244)
9 5/8
HSW-6D MODEL
DRAIN ON
1/2 IN NPT
WELLS MANUFACTURING COMPANY
2 ERIK CIRCLE, PO BOX 280, VERDI, NV 89439 U.S.A. • USA PHONE: [phone] • FAX: [phone]
FOR ORDERS ONLY: [phone] • FAX: [phone] • www.wellsbloomfield.com
© 2001 WELLS MANUFACTURING • PRINTED IN THE U.S.A. • 2/01 • REV(F) • PART NO. 40740
MODEL
H S W - 6
H A L F - S I Z E F O O D WA R M E R
DIMENSIONS: INCH
(MM)
WE L L S M A N U F A C T U R I N G
MINIMUM CLEARANCE REQUIRED
UNIT TO NEAREST SURFACE
BACK SIDE BOTTOM FRONT
1 1 6 3/4 4 1/2
(25) (25) (171) (114)
NOTE: Specifications are subject to change without notice. See installation instructions prior to installing the unit.
This document is not for installation purposes.
H S W - 6 E L E C T R I C A L S P E C I F I C AT I O N S :
HSW-6 120 825 6.9 SINGLE NONE
MODELS VOLTS WATTS AMPS PHASE POWER SUPPLY CORD
All models with an 'D' suffix have the same electrical specifications as the standard models.