Westin 58-54085 User manual

1
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service [phone]
www.westinautomotive.com
P.N.: 75-5854085-RevA ECO #: W18-0156 DATE: 04/17/19
INSTALLATION INSTRUCTIONS
ITEM QUANTITY DESCRIPTION TOOLS NEEDED
11DRIVER STEP BAR ASSEMBLY 13MM SOCKET
21PASSENGER STEP BAR ASSEMBLY 13MM WRENCH
31DRIVER FRONT MOUNTING BRACKET 16MM SOCKET
41PASSENGER FRONT MOUNTING BRACKET 16MM WRENCH
52CENTER MOUNTING BRACKET RATCHET
62REAR MOUNTING BRACKET TORQUE WRENCH
76UNIVERSAL BRACKET
824 M8 SPLIT LOCK WASHER
924 M8 FLAT WASHER
10 24 M8 HEX NUT
11 6M8 CARRIAGE BOLT
12 12 M10 HEX HEAD CAP SCREW
13 12 M10 BELLVILLE WASHER
14 12 M10 SERRATED FLANGE NUT
ANTI-SEIZE LUBRICANT MUST BE USED ON ALL STAINLESS STEEL FASTENERS TO PREVENT THREAD DAMAGE AND GALLING
CONTENT
OUTLAW NERF STEP BARS
APPLICATION:
2019 Ram 1500 Crew Cab (Excl. 2019 Ram 1500 Classic)
PART NUMBER:
58-54085
ITEM 1
Passenger Side Opposite
ITEM 3 ITEM 7ITEM 6ITEM 5ITEM 4

2
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service [phone]
www.westinautomotive.com
P.N.: 75-5854085-RevA ECO #: W18-0156 DATE: 04/17/19
PROCEDURE
1. Remove contents from box, verify if all parts listed are present and free from damage.
Carefully read and understand all instructions before attempting installation.
Failure to identify damage before installation could lead to a rejection of any claim.
2. Preassemble the Mounting Brackets (3-7). Do not tighten hardware at this time. See Figure 1.
Fig. 1
Rear Mounting Bracket Shown
Other Brackets Assemble Similarly
6
7
8
10
9
11

3
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service [phone]
www.westinautomotive.com
P.N.: 75-5854085-RevA ECO #: W18-0156 DATE: 04/17/19
3. Starting on the passenger side of the vehicle, locate the 3
mounting locations on the rocker panel.
Note A: The rear mounting location is shown in Figure 2.
Other mounting locations are similar.
Note B: The lower two studs on the rocker panel have a thick
coat of paint on them. When installing the M8 hex nuts, apply
extra pressure to start. If necessary, back M8 hex nuts off the
studs to clear build up.
See Figure 2.
Fig. 2
Rear Mounting Location Shown
Other Mounting Locations are Similar
4. At the rear mounting location, loosely install Rear Mounting Bracket (6) with preassembled Universal Bracket (7) using
the supplied M8 hardware. See Figures 3 & 4.
Rocker Panel
Fig. 3 Fig. 4
Reference for hardware Rocker Panel
5
8
8
7
10
9
10
10
9
11

4
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service [phone]
www.westinautomotive.com
P.N.: 75-5854085-RevA ECO #: W18-0156 DATE: 04/17/19
5. At the center passenger mounting location, loosely install Center Mount Bracket (5) with preassembled Universal Bracket
(7) using the supplied M8 hardware. See Figures 5 & 6.
6. At the front passenger mounting location, loosely install Front Mounting Brackets (3 & 4) with preassembled Universal
Mounting Bracket (7). Note: Installation is similar to Rear Mounting Bracket
7. Repeat Steps 4-7 on the driver side of the vehicle.
Fig 5 Fig 6 Pinch Weld
Pinch Weld
7
7
8
7
8
11
10
10
9
10
9
Reference for hardware

5
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service [phone]
www.westinautomotive.com
P.N.: 75-5854085-RevA ECO #: W18-0156 DATE: 04/17/19
8. For step bar installation, use the supplied M10 Hardware to loosely secure the step bar to the preinstalled brackets. See
Figures 7 & 8. Note: All brackets install similarly to step bar.
9. Align and adjust the step bars and brackets as needed, then fully tighten all hardware: M8 to 18 ft-lbs, M10 to 38 ft-lbs.
1
12 13
1
14
Fig 7 Fig 8
Front
ITEM 6 ITEM 5 ITEM 3
BRACKET LOCATION REFERENCE
Driver Side Shown
Front ITEM 4 ITEM 5 ITEM 6
Passenger Side Shown

6
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service [phone]
www.westinautomotive.com
P.N.: 75-5854085-RevA ECO #: W18-0156 DATE: 04/17/19
CARE INSTRUCTIONS
 REGULAR WAXING IS RECOMMENDED. DO NOT USE ANY TYPE OF POLISH OR WAX THAT MAY CONTAIN ABRASIVES.
 STAINLESS STEEL PRODUCTS CAN BE CLEANED WITH MILD SOAP AND WATER. STAINLESS STEEL POLISH SHOULD BE USED TO POLISH SMALL SCRATCHES.
 GLOSS BLACK FINISHES SHOULD BE CLEANED WITH MILD SOAP AND WATER
INSTALLATION COMPLETE

7
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service [phone]
www.westinautomotive.com
P.N.: 75-5854085-RevA ECO #: W18-0156 DATE: 04/17/19
Failure to follow these instructions could lead to death, personal injury, and / or property damage.
WARNING
Failure to follow these instructions could lead to death, personal injury, and / or property damage.
FASTENERS:
All Westin supplied fasteners must be utilized and installed in accordance with the installation in-
structions and apply torque to the specifications as defined. DOUBLE CHECK ALL FASTENERS
BEFORE INITIAL USE, AND PERIODICALLY IN THE FUTURE TO ENSURE PROPER FUNCTION
AND SAFETY.
DRILLING:
Most Westin products do not require drilling for installation. If drilling is defined as required, use
caution when drilling a vehicle. FAILURE TO REVIEW AN AREA TO BE DRILLED MAY RESULT IN
PERSONAL INJURY AND/OR INJURY TO OTHERS AS WELL AS VEHICLE DAMAGE.
EYE PROTECTION:
ALWAYS WEAR SAFETY GLASSES OR GOGGLES DURING THE INSTALLATION PROCESS TO
AVOID PERSONAL INJURY.
MAXIMUM TOWING/CARRYING CAPACITY: (if applicable)
The Westin Receiver Hitches will have a visible tow rating label affixed directly on the product.
User should never exceed the vehicle manufacturers maximum tow and weight rating regardless
of the capacity of the hitch. FAILURE TO FOLLOW THESE GUIDELINES WILL VOID THE WESTIN
WARRANTY AND MAY RESULT IN PERSONAL INJURY AND/OR INJURY TO OTHERS AS WELL
AS VEHICLE DAMAGE.
FOR CALIFORNIA RESIDENTS ONLY-PROP 65 WARNING:
Some products may contain chemicals such as DEHP, which can cause cancer, birth defects or
other reproductive harm. For more info go to www.p65warnings.ca.gov